Air compressors

Thermodynamic analysis of air compressors: compression processes (isothermal, isentropic, polytropic), efficiencies, volumetric efficiency with clearance, multistaging with intercooling, and standard formulae/results used in exams and interviews.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Air compressors supply pressurized air for tools, process plants, IC engines (supercharging), refrigeration, and gas turbines. Good thermodynamic modeling cuts power consumption, guides multistage design with intercooling, and helps diagnose real-world performance shortfalls.

Key ideas

  • We treat air as an ideal gas unless stated. Use R = 287 J/kg·K, cp ≈ 1005 J/kg·K, and γ = cp/cv ≈ 1.4 near ambient.

  • Sign convention here: “work input to the compressor” is positive; heat added to the air is positive. Steady-flow energy equation (neglecting KE/PE changes): W_in − Q = h2 − h1.

  • Compression process models

    • Isothermal compression: Temperature constant (T = const), achieved only with perfect, continuous cooling. Minimum theoretical work for given pressure ratio.
    • Isentropic (adiabatic, reversible) compression: No heat transfer and no irreversibility; highest temperature rise for a given pressure ratio among the common ideal models; used for defining efficiencies.
    • Polytropic compression: pv^n = const with exponent n between 1 (isothermal) and γ (adiabatic) for practical compressors with some cooling. It models the average path of real machines.
  • Positive-displacement vs. dynamic compressors

    • Reciprocating and rotary screw/scroll/vane are positive-displacement: the gas is trapped and its volume reduced; analysis commonly uses polytropic with clearance effects.
    • Centrifugal/axial (dynamic) compressors add energy via blades and diffusion; stage-wise polytropic efficiency is often used. In this topic we focus on thermodynamics common to all; detailed turbomachinery aerodynamics is treated under Brayton cycle and Turbines.
  • Key state relations for ideal gas (per kg)

    • Isentropic: T2s/T1 = (p2/p1)^((γ−1)/γ). Work to air: ws = cp (T2s − T1).
    • Polytropic: T2/T1 = (p2/p1)^((n−1)/n). Specific work to air: w = (n/(n−1)) R T1 [(p2/p1)^((n−1)/n) − 1]. Isothermal: set n = 1 to get w_iso = R T1 ln(p2/p1).
  • Efficiencies (compressors)

    • Isentropic efficiency (to air): η_c = (h2s − h1)/(h2 − h1) = (T2s − T1)/(T2 − T1). It measures how closely the actual path approaches the isentropic one for the same exit pressure.
    • Isothermal efficiency: η_iso = w_iso / w_actual_to_air. It compares actual work to the minimum possible (isothermal) for the same pressure ratio.
    • Polytropic efficiency (stage/infinitesimal definition): η_p = ln(p2/p1) / [(γ/(γ−1)) ln(T2/T1)]. Equivalently, the effective exponent is n = (γ η_p) / (γ η_p − (γ − 1)). Useful for multi-stage/dynamic compressors.
    • Mechanical efficiency: η_mech = Indicated power to air / Shaft power. Shaft power = (power to air)/η_mech. Mechanical losses include bearing, seal, and valve friction.
  • Volumetric performance with clearance (reciprocating)

    • Real cylinders have clearance volume Vc to avoid piston valve collision; define clearance ratio C = Vc/Vs, where Vs is swept volume per cycle.
    • After discharge, trapped air in Vc expands (approximately polytropically with the compression exponent n) during the next suction; suction starts only after pressure in the clearance pocket drops to suction level. Resulting standard expression (neglect leakage and valve pressure drop):
      • Volumetric efficiency: η_v = (actual intake volume at suction conditions per cycle) / Vs = 1 + C − C (p2/p1)^(1/n).
    • Implications: higher pressure ratio or larger C lowers η_v; η_v → 1 as C → 0. Clearance affects mass throughput but not the specific work to air for a given p1, p2, and n.
  • Mass flow and capacity metrics

    • ṁ = ρ_suction × η_v × V̇_swept for reciprocating compressors (single-acting: one intake per revolution; double-acting: two). ρ_suction = p1/(R T1) for ideal gas.
    • Free Air Delivery (FAD): volumetric flow rate converted to standard reference conditions (e.g., 1.01325 bar, 15 °C, dry). Standards vary; always use the stated reference in the problem/spec.
  • Multistage compression with intercooling

    • Intercooling removes heat between stages; with perfect intercooling, the interstage outlet returns to the original inlet temperature T1.
    • For k identical polytropic stages, same n in all stages, negligible intercooler pressure drops, and perfect intercooling:
      • Minimum total work occurs when all stage pressure ratios are equal: r_s = (p_out/p_in)^(1/k). For two stages: p_intermediate = √(p1 p3).
      • With equal ratios and perfect intercooling, each stage has the same discharge temperature: T_out,stage = T1 r_s^((n−1)/n). As the number of stages → ∞, total work → isothermal work.
    • Sizing rule-of-thumb (perfect intercooling, same T_in per stage, same C and n): required swept volume is inversely proportional to stage suction density; thus V̇_swept,LP / V̇_swept,HP ≈ p2/p1 for two stages (since T equal, density ∝ p).
  • Heat transfer and real deviations

    • Real compressors have valve pressure drops, leakage (re-expansion not perfectly polytropic), non-uniform cooling (thus effective n varies with speed and load), intercooler pressure loss, and mechanical friction. These raise required shaft power and alter discharge temperature from ideal predictions.
  • Standard results and limiting cases

    • For given p1 and p2, w_iso < w_poly < w_isentropic (since 1 ≤ n ≤ γ for compression with cooling).
    • With perfect intercooling and equal stage ratios, total work is minimized; with unequal ratios or intercooler pressure losses, the optimum intermediate pressure shifts and is no longer the geometric mean.
    • Clearance C → 0 gives η_v → 1; large C and high ratio can push η_v low enough to limit capacity severely.
  • Assumptions commonly made in exam problems (state them explicitly when you use them):

    • Ideal gas, constant specific heats; steady operation; negligible KE/PE changes; same polytropic exponent in all stages; negligible pressure drop in suction/discharge passages and intercoolers unless specified; perfect intercooling if stated; no leakage unless specified; single-acting unless specified.

Formulas

T2s/T1 = (p2/p1)^((γ−1)/γ) Isentropic temperature relation for ideal gas; γ = cp/cv (dimensionless). Applies to reversible adiabatic compression/expansion.

w_s = cp (T2s − T1) Isentropic specific work to the fluid (J/kg). Applies when kinetic/potential energy changes are negligible.

T2/T1 = (p2/p1)^((n−1)/n) Polytropic temperature relation for ideal gas (dimensionless). n is polytropic exponent (>1 for compression with cooling); applies to pv^n = const.

w = (n/(n−1)) R T1 [ (p2/p1)^((n−1)/n) − 1 ] Polytropic specific work to the fluid (J/kg). Ideal gas, negligible KE/PE; reduces to isentropic when n = γ.

w_iso = R T1 ln(p2/p1) Isothermal specific work to the fluid (J/kg). Ideal gas, T constant.

η_c = (T2s − T1)/(T2 − T1) Isentropic efficiency of compressor (dimensionless). T2 is actual discharge temperature at p2; T2s is isentropic discharge temperature at p2.

η_iso = w_iso / w_actual Isothermal efficiency of compressor (dimensionless). w_actual is actual specific work input to the fluid.

η_p = ln(p2/p1) / [ (γ/(γ−1)) ln(T2/T1) ] Polytropic (small-stage) efficiency for compressors (dimensionless). Ideal gas; integrates the differential definition over the path.

n = (γ η_p) / (γ η_p − (γ − 1)) Relation between effective polytropic exponent and polytropic efficiency (dimensionless). Ideal gas.

η_mech = (Power to air) / (Shaft power) Mechanical efficiency (dimensionless). Power to air is ṁ w_actual.

η_v = 1 + C − C (p2/p1)^(1/n) Volumetric efficiency of a single-stage reciprocating compressor with clearance (dimensionless). C = Vc/Vs (dimensionless). Assumes polytropic re-expansion with exponent n, negligible leakage and pressure drops.

ṁ = ρ_suction × η_v × V̇_swept Mass flow rate for reciprocating compressor (kg/s). ρ_suction = p1/(R T1) (kg/m³). V̇_swept is swept volume rate (m³/s) accounting for acting (single/double) and speed.

p_intermediate = √(p1 p3) Optimum intermediate pressure for two-stage compression with perfect intercooling, equal n in stages, negligible intercooler loss (Pa). Minimizes total work.

W_total,2stage = 2 × (n/(n−1)) R T1 [ r_s^((n−1)/n) − 1 ] Total specific work for two equal-ratio polytropic stages with perfect intercooling (J/kg). r_s = (p3/p1)^(1/2).

Worked examples

Example 1 (direct): Single-stage polytropic compression Given: Air at p1 = 1.0 bar, T1 = 300 K is compressed to p2 = 7.0 bar in a reciprocating compressor following pv^n with n = 1.3. Take R = 287 J/kg·K. Find: (a) discharge temperature T2, (b) specific work w, (c) isothermal efficiency η_iso.

Steps:

  1. Relation for T2: T2 = T1 (p2/p1)^((n−1)/n).

    • Exponent: (n−1)/n = 0.3/1.3 = 0.230769.
    • Ratio: r = 7.0.
    • Compute r^((n−1)/n) = 7^0.230769 ≈ 1.567.
    • T2 = 300 K × 1.567 = 470.1 K.
  2. Polytropic specific work: w = (n/(n−1)) R T1 [ r^((n−1)/n) − 1 ].

    • n/(n−1) = 1.3/0.3 = 4.3333 (dimensionless).
    • R T1 = 287 × 300 = 86,100 J/kg.
    • Bracket = 1.567 − 1 = 0.567.
    • w = 4.3333 × 86,100 × 0.567 ≈ 211,548 J/kg.
    • Answer: w ≈ 211.5 kJ/kg.
  3. Isothermal work and efficiency:

    • w_iso = R T1 ln r = 86,100 × ln 7 ≈ 86,100 × 1.94591 ≈ 167,543 J/kg.
    • η_iso = w_iso / w ≈ 167,543 / 211,548 ≈ 0.792.
    • Answer: η_iso ≈ 79.2%. Discharge temperature T2 ≈ 470.1 K.

Example 2 (GATE-level): Two-stage, perfect intercooling, capacity and work Given: Air at p1 = 1.0 bar, T1 = 300 K is compressed to p3 = 16 bar in a two-stage reciprocating compressor with perfect intercooling. Both stages follow pv^n with n = 1.3. Clearance ratio in each stage C = 0.05. Assume ideal gas, negligible pressure drops, and same speed in both stages. Mass flow rate ṁ = 1.0 kg/s. Take R = 287 J/kg·K. Find: (a) optimum intermediate pressure p2 for minimum work, (b) discharge temperature after HP, (c) total specific work to air and power to air, (d) ratio of LP to HP swept volume rates V̇_swept,LP / V̇_swept,HP.

Steps:

  1. Optimum intermediate pressure (perfect intercooling, equal n):

    • p2 = √(p1 p3) = √(1.0 × 16) bar = 4.0 bar.
    • Stage pressure ratio r_s = p2/p1 = p3/p2 = 4.0.
  2. Stage discharge temperature with polytropic law:

    • T_out,stage = T1 × r_s^((n−1)/n).
    • Exponent (n−1)/n = 0.230769. Compute 4^0.230769 ≈ 1.377.
    • T_out,stage ≈ 300 × 1.377 = 413.1 K (same for HP discharge due to perfect intercooling).
  3. Total specific work to air (two equal-ratio stages):

    • Per stage: w_s = (n/(n−1)) R T1 [ r_s^((n−1)/n) − 1 ].
    • Compute bracket: 1.377 − 1 = 0.377.
    • R T1 = 86,100 J/kg; n/(n−1) = 4.3333.
    • w_s ≈ 4.3333 × 86,100 × 0.377 ≈ 140,659 J/kg.
    • Total: W_total = 2 × w_s ≈ 281,318 J/kg = 281.3 kJ/kg.
    • Power to air: P_air = ṁ × W_total = 1.0 × 281.3 kW = 281.3 kW.
    • Note: Shaft power = P_air / η_mech if η_mech is given.
  4. Volumetric efficiency in each stage (clearance effect):

    • η_v = 1 + C − C r_s^(1/n).
    • 1/n = 0.76923. Compute r_s^(1/n) = 4^0.76923 ≈ 2.904.
    • η_v ≈ 1 + 0.05 − 0.05 × 2.904 = 1.05 − 0.1452 = 0.9048 (same in both stages since it depends on r_s and C).
  5. Ratio of swept volume rates (perfect intercooling ⇒ same stage inlet temperature):

    • ṁ = ρ_s × η_v × V̇_swept for each stage.
    • ρ_s,LP = p1/(R T1) = 1.0 bar/(287 × 300) = 100,000/(86,100) ≈ 1.161 kg/m³.
    • ρ_s,HP = p2/(R T1) = 4 × ρ_s,LP ≈ 4.644 kg/m³.
    • For same ṁ and same η_v, V̇_swept ∝ 1/ρ_s ⇒ V̇_swept,LP / V̇_swept,HP = ρ_s,HP / ρ_s,LP = 4.0.

Answers: p2 = 4.0 bar; T_out,HP ≈ 413.1 K; W_total ≈ 281.3 kJ/kg; P_air ≈ 281.3 kW; V̇_swept,LP / V̇_swept,HP = 4.0.

Common mistakes

  • Mixing up isentropic and polytropic relations (using γ where n is intended, or vice versa) and forgetting that T must be in kelvin.
  • Using gauge instead of absolute pressures in ratios; always use absolute pressures in p2/p1.
  • Omitting clearance effects when computing capacity; η_v can drop significantly with high pressure ratio.
  • Confusing efficiency definitions (η_c vs. η_iso vs. η_mech) or taking η_c as (actual)/(ideal) instead of (ideal)/(actual) for compressors.
  • Forgetting that minimum work in multistage requires equal stage pressure ratios only when intercooling is perfect and losses are negligible.
  • Using base-10 logarithms in w_iso; the formula uses natural log ln.

For GATE ME

  • Short derivations: volumetric efficiency with clearance; condition for minimum work and geometric-mean intermediate pressure; relation between polytropic efficiency and exponent; limiting cases (n → 1, n → γ).
  • Numericals: power input and discharge temperature for given pressure ratio and n or η_c; multistage work and intermediate pressure; capacity/FAD and swept volume with given C and speed; efficiency comparisons (isothermal vs isentropic vs polytropic) for the same p2/p1.
  • Conceptual MCQs: effect of clearance on capacity and on specific work (work per kg is independent of clearance for given p1, p2, n); order of work requirements (isothermal < polytropic < isentropic); why equal stage pressure ratios minimize work; impact of intercooling.
  • Cross-links: Compressor role in Brayton cycle (overall cycle efficiency sensitivity to compressor η_c), but detailed cycle analysis is under Brayton cycle.

Quick check

  1. A single-stage reciprocating compressor with clearance ratio C compresses air polytropically from p1 to p2. Write η_v in terms of C, p2/p1, and n.
  2. State the condition for minimum work in a two-stage compressor with perfect intercooling and equal polytropic exponents.
  3. A compressor has η_c = 0.8 and compresses air from 1 bar, 300 K to 5 bar. Compute T2s and write the formula for T2 in terms of η_c.

Answers: 1) η_v = 1 + C − C (p2/p1)^(1/n). 2) Equal pressure ratio per stage: p2 = √(p1 p3). 3) T2s = 300 × 5^((γ−1)/γ); T2 from η_c = (T2s − T1)/(T2 − T1) ⇒ T2 = T1 + (T2s − T1)/η_c.

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?