First Year Engineering is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Hydrogen and biofuels

Hydrogen and biofuels: definitions, production routes (electrolysis, reforming, fermentation, digestion), properties, storage, reactions, formulas (HHV/LHV, Faraday’s law), worked numericals, diagrams to draw, exam tips and quick checks.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

  • This topic links to “Batteries and fuel cells” (for fuel cells using hydrogen), “Fuels: calorific value and analysis of coal” (for energy calculations), and “Principles of green chemistry” (for sustainability).

Key ideas

  • Energy carrier: A substance that transports or stores energy (e.g., hydrogen), not a primary source by itself. It must be produced using energy from primary sources (fossil fuels, biomass, solar, wind, hydro, nuclear), typically via electricity or heat.
  • Hydrogen (H₂) as an energy carrier: Colorless gas, high specific energy (energy per unit mass), burns to water with zero carbon emissions at point of use. Key issue: storage and production impact.
  • Biofuel: A fuel derived from biological materials (biomass), such as sugar, starch, oil, or organic waste. Types: bioethanol (alcohol), biodiesel (fatty acid methyl esters), biogas (CH₄-rich gas), biohydrogen (H₂ from biomass routes).
  • Higher heating value (HHV) and Lower heating value (LHV): HHV includes the latent heat of condensation of water in products; LHV excludes it (water remains as vapor). For engines and fuel cells that exhaust water vapor, LHV is used.
  • Stoichiometric combustion: The exact amount of oxygen needed to fully oxidize fuel to CO₂ and H₂O (and N₂ passes through if air is used). Example reactions given below.
  • Green hydrogen: H₂ made by electrolysis using renewable electricity. Blue hydrogen: H₂ from fossil routes (like reforming) with CO₂ captured. Grey hydrogen: H₂ from fossil routes without CO₂ capture.
  • Electrolysis: Splitting water into H₂ and O₂ using electricity. Assumptions in ideal derivations: 100% current efficiency and standard conditions unless noted.
  • Steam methane reforming (SMR): Reaction of methane with steam to make syngas (CO + H₂), followed by water–gas shift (CO + H₂O → CO₂ + H₂). Industrially dominant but CO₂-intensive unless captured.
  • Biomass conversion: Routes include fermentation (sugars → ethanol), anaerobic digestion (organic matter → biogas), transesterification (vegetable oil + alcohol → biodiesel), gasification (biomass → syngas → fuels), and dark/photo fermentation for biohydrogen.
  • Storage of hydrogen: (i) Compressed gas in cylinders, (ii) Cryogenic liquid hydrogen (LH₂), (iii) Solid-state storage (metal hydrides, adsorbents). Key trade-offs: mass, volume, energy cost, boil-off.
  • Cetane number and Octane number: Measures of ignition quality in diesel and gasoline engines respectively. Biodiesel typically increases cetane when blended with diesel; ethanol increases octane when blended with gasoline. (Full details are covered under “Liquid fuels, cracking and octane number”.)

Exact statements and common derivations

  1. Stoichiometry of hydrogen combustion
  • Exact statement: Under complete combustion in oxygen, hydrogen burns to water: 2 H₂ + O₂ → 2 H₂O. Assumptions: complete conversion, no side products, standard chemical equation balancing.
  • In air (≈21% O₂, 79% N₂ by volume), nitrogen is inert: 2 H₂ + O₂ + 3.76 N₂ → 2 H₂O + 3.76 N₂.
  • Implication: No CO₂ from hydrogen combustion; however, high-temperature flames can form NOx from air nitrogen unless controlled (dilution, staged combustion, low-temperature fuel cells).
  1. Electrolysis and Faraday’s laws (for H₂ production)
  • Exact statement (Faraday’s first law): The mass of a substance produced at an electrode is directly proportional to the quantity of electricity passed.
  • Derived formula: m = (I·t·M)/(n·F), where m is mass of product; I current; t time; M molar mass; n electrons per mole; F Faraday constant. Assumptions: 100% current efficiency (no side reactions).
  • For water electrolysis (overall): 2 H₂O(l) → 2 H₂(g) + O₂(g). At the cathode: 2 H₂O + 2 e⁻ → H₂ + 2 OH⁻ (alkaline) or 2 H⁺ + 2 e⁻ → H₂ (acid/PEM). n = 2 for H₂ formation per mole H₂.
  1. Bioethanol fermentation
  • Exact statement: Glucose undergoes anaerobic fermentation to ethanol and carbon dioxide: C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂, catalyzed by yeast, typically 30–35 °C, pH ~4–5. Assumptions: Only glucose; no cell growth losses in theoretical yield.
  • Theoretical mass yield of ethanol from glucose: (2 × 46.07) / 180.16 ≈ 0.511 kg ethanol per kg glucose. Real yields are lower due to cell growth and by-products.
  1. Biodiesel via transesterification
  • Exact statement: A triglyceride reacts with a short-chain alcohol (commonly methanol) in presence of a catalyst (NaOH/KOH) to form fatty acid esters (biodiesel) and glycerol: Triglyceride + 3 MeOH → 3 FAME + Glycerol. Assumptions: Complete conversion, excess methanol used in practice to drive equilibrium.
  • For free fatty acids (FFAs), an acid-catalyzed esterification step (FFA + MeOH → FAME + H₂O) is often done before base-catalyzed transesterification.
  1. Anaerobic digestion to biogas
  • Exact statement: In absence of oxygen, a sequence of microbial steps (hydrolysis, acidogenesis, acetogenesis, methanogenesis) converts organic matter to biogas (primarily CH₄ and CO₂). A typical model substrate (glucose) overall: C₆H₁₂O₆ → 3 CO₂ + 3 CH₄. Assumptions: Balanced ideal mix; in practice composition varies.

Diagrams to draw and label (describe clearly)

  • Hydrogen production map: Draw a block diagram with boxes for “Water electrolysis (PEM/alkaline/SOE)”, “SMR + WGS”, “Coal/biomass gasification”, “Photocatalysis/biological routes”. Arrows to “Hydrogen purification” then to “Storage: compressed, liquid, hydride”. Label key inputs: electricity, water, natural gas, steam, air/oxygen.
  • PEM electrolyzer schematic: Two end plates, bipolar plates with flow fields, membrane electrode assembly (MEA) at center. Label: anode (oxygen evolution), cathode (hydrogen evolution), proton exchange membrane, water feed at anode, DC power supply, H₂ and O₂ outlets.
  • Biodiesel reactor: Stirred tank with oil feed, methanol + catalyst feed, heating jacket (50–65 °C), separator tank labeled “FAME (top), glycerol (bottom)”, methanol recovery loop.
  • Anaerobic digester: Cylindrical tank, feed inlet, mixer, gas dome, gas outlet to H₂S scrubber, effluent outlet. Inside, annotate stages: hydrolysis → acidogenesis → methanogenesis zones (schematic).
  • Hydrogen storage options: Three side-by-side sketches: (1) High-pressure cylinder (label pressure like 350–700 bar), (2) Cryogenic dewar (20 K), (3) Hydride bed with heat exchange tubes. Add pros/cons notes beside each (mass, volume, energy cost).

Sustainability and safety notes

  • Hydrogen is clean at point of use but total emissions depend on production route; use green electricity for lowest life-cycle CO₂.
  • Biofuels can be carbon-neutral if biomass regrowth balances CO₂ emitted; indirect land-use change and fertilizer emissions must be managed.
  • Safety: Hydrogen is very light and diffuses fast; wide flammability range in air (about 4–75% by volume). Needs leak detection, ventilation, and ignition source control. Biogas may contain H₂S (toxic, corrosive) and moisture; scrub before use.

Formulas

Complete combustion of hydrogen in oxygen. Stoichiometric basis for air-fuel calculations.

  • CH₄ + 2 O₂ → CO₂ + 2 H₂O Complete combustion of methane (useful for biogas CH₄ content calculations).

  • HHV = LHV + h_v · m_H2O(products) HHV is higher heating value; LHV is lower heating value; h_v is latent heat of vaporization of water (J/kg); m_H2O is mass of water formed per unit fuel burned (kg). Applies when products cool to condense water.

  • m = (I · t · M) / (n · F) Faraday’s law for electrolysis. m: mass of product (kg); I: current (A); t: time (s); M: molar mass (kg/mol); n: electrons per mole of product (dimensionless); F: Faraday constant (96485 C/mol). Assumes 100% current efficiency.

  • n = p · V / (R · T) Ideal gas law for moles n (mol); p: absolute pressure (Pa); V: volume (m³); R: gas constant (8.314 J·mol⁻¹·K⁻¹); T: temperature (K). Applies for ideal gases or as a first approximation for compressed hydrogen (note deviations at high p).

  • ρ = p · M / (R · T) Ideal gas density ρ (kg/m³); p pressure (Pa); M molar mass (kg/mol); R gas constant (J·mol⁻¹·K⁻¹); T temperature (K). Use cautiously for hydrogen at high pressure.

  • Energy = m · LHV Energy released (J); m mass of fuel (kg); LHV lower heating value (J/kg). Use LHV for engines/fuel cells exhausting water vapor.

  • Yield_ethanol,theoretical = 2 · M_ethanol / M_glucose ≈ 0.511 kg/kg From fermentation stoichiometry; applies to pure glucose substrate theoretical yield.

  • Biogas CH₄ volume = x_CH4 · V_biogas Volume of methane in biogas (m³) from CH₄ mole/volume fraction x_CH4 and total biogas volume V_biogas (m³). Use for energy estimates with methane LHV per m³ at STP.

  • E_CH4,STP ≈ 35.8 MJ/m³ Approximate LHV energy content of methane per cubic metre at STP. Use for quick biogas energy estimates.

  • Hydrogen HHV ≈ 142 MJ/kg, LHV ≈ 120 MJ/kg Typical values for H₂. Use consistently; state which one you use.

Worked examples

  1. Hydrogen needed for a given energy and storage volume estimate Given: Required net energy output = 60 MJ using hydrogen; use LHV = 120 MJ/kg. Find (a) mass of H₂ needed, (b) its volume at STP using density ρ_STP ≈ 0.0899 kg/m³, (c) approximate volume at 700 bar and 298 K using ideal gas scaling from STP (1 bar, 273 K).

Steps:

  1. Formula: Energy = m · LHV m = Energy / LHV = 60 MJ / 120 MJ·kg⁻¹ = 0.5 kg. Answer (a): m_H2 = 0.5 kg.
  2. Volume at STP: V = m / ρ_STP = 0.5 kg / (0.0899 kg·m⁻³) ≈ 5.56 m³. Answer (b): V_STP ≈ 5.56 m³.
  3. Ideal-gas volume scaling: V ∝ (T/p). From STP (p₁ = 1 atm = 1.01325 bar, T₁ = 273 K) to storage (p₂ = 700 bar, T₂ = 298 K): V₂ = V₁ · (T₂/T₁) · (p₁/p₂) = 5.56 · (298/273) · (1.01325/700) m³ ≈ 0.00879 m³ = 8.79 L. Final: (c) V_700bar,ideal ≈ 8.8 L for 0.5 kg H₂. Note: Real-gas effects make actual volume larger; this is a first approximation.

Final answers: (a) 0.5 kg H₂, (b) 5.56 m³ at STP, (c) about 8.6 L at 700 bar (ideal-gas estimate).

  1. Ethanol from glucose by fermentation — theoretical and practical yield Given: Fermenter feed has 1800 kg of fermentable glucose equivalent. The process achieves 90% of theoretical yield. Find ethanol mass produced. Use M_glucose = 180.16 g/mol, M_ethanol = 46.07 g/mol; theoretical yield = 0.511 kg/kg.

Steps:

  1. Theoretical ethanol = 0.511 × 1800 kg = 920 kg (rounded from 919.8 kg).
  2. Practical ethanol at 90% = 0.90 × 920 kg = 828 kg.

Final answer: About 828 kg of ethanol.

  1. Energy from biogas volume with given composition Given: Daily biogas production = 200 m³ at STP; composition: 60% CH₄, 40% CO₂ by volume. Find daily energy in MJ using methane LHV ≈ 35.8 MJ/m³ at STP. Assume CO₂ contributes zero energy.

Steps:

  1. Methane volume = x_CH4 · V_total = 0.60 × 200 m³ = 120 m³ CH₄.
  2. Energy = 120 m³ × 35.8 MJ/m³ = 4296 MJ.

Final answer: Daily energy ≈ 4.30 × 10³ MJ.

Theory model answer — Short note on biodiesel production (outline you can adapt in exams)

  • Definition: Biodiesel is a mixture of fatty acid alkyl esters (usually methyl esters, FAME) produced from vegetable oils or animal fats by transesterification with methanol.
  • Chemistry: Triglyceride + 3 MeOH → 3 FAME + Glycerol; base catalyst (NaOH/KOH), 50–65 °C, atmospheric pressure. Often use excess methanol (e.g., 6:1 molar ratio) to push equilibrium.
  • Process steps: (i) Feed pretreatment (remove water/FFAs via esterification), (ii) Base-catalyzed transesterification in a stirred reactor, (iii) Phase separation (glycerol layer), (iv) Methanol recovery, (v) Washing/polishing of FAME, (vi) Glycerol refining.
  • Properties: Higher cetane than petro-diesel, near-zero sulfur, oxygen content improves combustion but slightly lowers volumetric energy density. Good lubricity. Cold-flow issues depend on feedstock (saturated FAME increase pour/cloud point).
  • Blending: Common blends B5, B20, B100 (number = percentage biodiesel by volume). Ensure compatibility with seals and filters.
  • Applications: Compression-ignition engines with minimal modification up to certain blends; emission reductions in PM, CO, HC; NOx may slightly increase depending on engine calibration.

Common mistakes

  • Forgetting water formation when computing HHV–LHV differences.
  • Using ideal gas law at very high hydrogen pressures without noting non-ideality or temperature effects.
  • Treating biogas CO₂ as combustible in energy calculations; only CH₄ contributes significantly to LHV.
  • Writing wrong stoichiometric coefficients (e.g., CH₄ + O₂ → CO₂ + H₂O without balancing to 2 O₂ and 2 H₂O).
  • In Faraday’s law problems, using n = 1 for H₂ generation; correct is n = 2 electrons per mole of H₂.
  • Ignoring mass balances around biodiesel reactor (glycerol phase carries methanol and catalyst; needs recovery) in theory answers.
  • Not labeling diagram parts clearly (electrolyzer: anode/cathode reversed; digester missing gas cleaning like H₂S scrubber).

For your exam

  • Short notes: Hydrogen storage methods with pros/cons; hydrogen safety; biogas composition and purification; routes to biohydrogen; comparison of ethanol vs biodiesel vs biogas (feedstock, process, use).
  • Diagrams: PEM/alkaline electrolyzer labeled; biodiesel plant flow sketch; anaerobic digester with stages; hydrogen storage comparison. Draw neat boxes, arrows, and label all streams.
  • Derivations/stoichiometry: Balance combustion equations; derive ethanol theoretical yield; apply Faraday’s law to calculate H₂ rate in an electrolyzer.
  • Numericals: Energy from given mass/volume of hydrogen/biofuel; volume of compressed hydrogen; ethanol yield from sugar; energy from biogas with given CH₄ fraction. Always state assumptions (LHV used, STP basis, ideal gas) and carry units.
  • Cross-references: If fuel cells are asked, keep it brief and refer to the “Batteries and fuel cells” topic for detailed mechanisms; here focus on hydrogen as a fuel and its production/storage.

Quick check

  1. Define LHV and HHV. Which one would you use for engine fuel economy and why?
  2. Write balanced equations for (a) combustion of hydrogen in oxygen and (b) fermentation of glucose to ethanol.
  3. A biogas stream is 55% CH₄ by volume at STP. How much methane (m³) is in 50 m³ of biogas, and what is its energy (MJ) using 35.8 MJ/m³?

Answers: 1) LHV excludes latent heat of water in products; HHV includes it. Use LHV for engines because exhaust water is not condensed. 2a) 2 H₂ + O₂ → 2 H₂O; 2b) C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂. 3) Methane volume = 0.55 × 50 = 27.5 m³; Energy ≈ 27.5 × 35.8 = 985 MJ (approx.).

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?