First Year Engineering is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Electrochemistry and electrode potentials

Electrochemistry and electrode potentials: cells, electrode/sign conventions, Nernst equation, EMF, reference electrodes, electrochemical series, ΔG and K relations, and applications.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Electrochemistry connects chemical reactions with electricity. Engineers use it to design batteries and fuel cells, prevent and diagnose corrosion, measure pH and ion concentrations with electrodes, and run industrial processes like electroplating and electrorefining.

Key ideas

  • Galvanic (voltaic) cell: a device where a spontaneous redox reaction generates electrical energy; anode is negative, cathode is positive.
  • Electrolytic cell: a device where electrical energy drives a non-spontaneous reaction; anode is positive, cathode is negative.
  • Half-cell: one electrode (metal, gas on inert electrode, or redox couple) in contact with its ions; it has a potential defined relative to a reference.
  • Electrode potential (E): the tendency of a half-cell to gain or lose electrons, measured as a voltage relative to a reference electrode under specified conditions.
  • Standard hydrogen electrode (SHE): the reference electrode assigned zero potential by convention at 298 K; H2(g, 1 bar) | H+(aq, a = 1). All other electrode potentials are measured relative to SHE.
  • Standard electrode potential (E°): electrode potential when all solutes have unit activity (approximately 1 mol·dm⁻³ for dilute solutions), gases are at 1 bar, and T = 298 K. Tabulated as standard reduction potentials for reactions written as reductions.
  • Electrochemical series: a list of elements/ions arranged by E° (reduction). More positive E° means stronger oxidizing agent (more easily reduced); more negative E° means stronger reducing agent (more easily oxidized).
  • Cell potential (E_cell): the potential difference of a full cell. For cells written with reduction potentials, E_cell = E_cathode − E_anode.
  • Cell notation: Anode (oxidation) on left, cathode (reduction) on right; single vertical line for phase boundary, double vertical line for salt bridge. Example: Zn(s) | Zn²⁺(aq) ∥ Cu²⁺(aq) | Cu(s).
  • Salt bridge: a junction (often U-tube with inert electrolyte like KCl/KNO₃ in gel) allowing ion migration to maintain electroneutrality and completing the circuit; minimizes liquid junction potential.
  • Nernst equation: relates electrode or cell potential to activities (or approximate concentrations) of reactants and products at any temperature.
  • Reaction quotient (Q): ratio of activities of products to reactants raised to stoichiometric coefficients for the overall cell reaction.
  • Gibbs free energy change (ΔG): the maximum non-PV work obtainable; for a cell, ΔG = −nFE_cell. At standard conditions, ΔG° = −nFE°_cell. At equilibrium, ΔG° = −RT ln K, so E°_cell = (RT/nF) ln K.

Exact statements and typical derivations:

  1. Law/Definition: Standard electrode potential
  • Statement: The standard electrode potential E° of a half-reaction written as a reduction is the potential of that half-cell when all participating species have unit activity at 298 K, and the gas pressure (if any) is 1 bar, measured relative to the standard hydrogen electrode, which is assigned E° = 0 V.
  • Assumptions: Ideal dilute solutions so activities ≈ molar concentrations; temperature 298 K; pressure 1 bar for gases.
  1. Nernst equation for a half-cell
  • General half-reaction (reduction form): aA + bB + ne⁻ → cC + dD.
  • Statement: E = E° − (RT/nF) ln[(a_C^c · a_D^d)/(a_A^a · a_B^b)].
  • Assumptions: Constant temperature, reversible conditions, activities well-defined (use concentrations for dilute solutions), negligible liquid junction and IR drop.
  • Derivation (steps commonly asked):
    1. For the half-reaction, the chemical affinity relates to ΔG = ΔG° + RT ln Q, where Q = (a_C^c a_D^d)/(a_A^a a_B^b).
    2. Electrical work obtainable reversibly is w_elec,max = −nFE.
    3. At constant T and P, maximum non-PV work equals ΔG, so ΔG = −nFE.
    4. Similarly, standard change ΔG° = −nFE°.
    5. Substituting ΔG and ΔG° gives −nFE = −nFE° + RT ln Q.
    6. Rearranging: E = E° − (RT/nF) ln Q.
  1. Nernst equation for a full cell
  • Statement: E_cell = E°_cell − (RT/nF) ln Q_cell, where Q_cell is written for the overall cell reaction as reduction at the cathode and oxidation at the anode.
  • Also E_cell = E_cathode − E_anode when both are expressed as reduction potentials at their actual activities.
  1. Relation between E°, ΔG°, and equilibrium constant K
  • Statements:
    • ΔG° = −nF E°_cell.
    • ΔG° = −RT ln K.
    • Therefore, E°_cell = (RT/nF) ln K = (2.303 RT/nF) log₁₀ K.
  • Assumptions: Activities used in K; temperature specified.
  1. Identifying anode/cathode using E°
  • Rule: In a galvanic cell written with both half-reactions as reductions, the half-reaction with more positive E° acts as cathode (reduction proceeds), and the other as anode (is reversed and undergoes oxidation). E°_cell = E°(cathode) − E°(anode).

Reference electrodes (construction, function, diagram hints):

  • SHE: Platinized Pt electrode immersed in H⁺(aq, a = 1), bubbled with H₂ at 1 bar; E° = 0 V at 298 K. Diagram: Draw a Pt foil/black platinized surface, gas inlet for H₂ bubbles, immersed in acid solution labeled a(H⁺) = 1, temperature 298 K, pressure 1 bar.
  • Saturated calomel electrode (SCE): Hg | Hg₂Cl₂(s) | KCl(aq, saturated). Stable, convenient aqueous reference. Typical potential vs SHE at 298 K: about +0.241 V (saturated KCl). Diagram: Glass tube with mercury at bottom (label Hg), paste of Hg₂Cl₂(s), saturated KCl solution, porous frit/junction, and a Pt wire contact.
  • Silver/silver chloride (Ag/AgCl) electrode: Ag | AgCl(s) | Cl⁻(aq, typically saturated KCl). Typical potential vs SHE at 298 K: about +0.197 V for saturated KCl. Diagram: Silver wire coated with AgCl immersed in KCl, porous junction, external lead.
  • Use: Provide a stable reference to measure unknown electrode potentials; connect via salt bridge to test solution.

Diagrams commonly asked (describe what to draw and label):

  • Daniell cell: Left beaker with Zn(s) electrode dipped in ZnSO₄(aq, specify concentration), right beaker with Cu(s) in CuSO₄(aq), a salt bridge (U-tube with KCl gel) connecting solutions, external wire with voltmeter; label electron flow from Zn (anode, −) to Cu (cathode, +).
  • Cell notation for Daniell: Zn(s) | Zn²⁺(aq) ∥ Cu²⁺(aq) | Cu(s).

Practical points:

  • Activities vs concentrations: For dilute solutions, a ≈ c/c°, with c° = 1 mol·dm⁻³; for exam numericals, use molar concentrations unless told otherwise.
  • Temperature: If not specified, assume 298 K. At 298 K, 2.303 RT/F ≈ 0.05916 V. Use R = 8.314 J·mol⁻¹·K⁻¹ and F = 96485 C·mol⁻¹ (≈ 9.6485 × 10⁴ C·mol⁻¹).
  • pH and hydrogen electrode: For 2H⁺ + 2e⁻ → H₂ (P = 1 bar), E_H⁺/H₂ = −0.05916 × pH (298 K).
  • Liquid junction potential: small potential at solution interface; minimized by salt bridge with ions of similar mobility (e.g., KCl).

Applications linked to other syllabus topics:

  • Batteries and fuel cells: Full cells designed using E° and Nernst (covered in that topic).
  • Corrosion: Galvanic series and potentials explain driving force for corrosion (covered in corrosion topics).

Formulas

E = E° − (RT/nF) ln Q — Nernst equation for a half-cell or full cell; E (V): electrode or cell potential; E° (V): standard potential; R (J·mol⁻¹·K⁻¹): gas constant; T (K): temperature; n (mol e⁻): electrons transferred; F (C·mol⁻¹): Faraday constant; Q (dimensionless): reaction quotient. Applies to reversible cells.

E_cell = E_cathode − E_anode — Cell potential from half-cell reduction potentials; each E (V). Applies when both half-reactions are written as reductions at their actual activities.

ΔG = −n F E_cell — Electrical work–free energy relation; ΔG (J·mol⁻¹ of reaction as written); n (mol e⁻), F (C·mol⁻¹), E_cell (V). Applies to maximum reversible work.

ΔG° = −n F E°_cell — Standard free energy–standard EMF relation; symbols as above, at standard conditions (activities = 1, gases 1 bar, 298 K unless specified).

ΔG° = −R T ln K — Relation between standard free energy change and equilibrium constant K (dimensionless), at temperature T (K).

E°_cell = (R T / n F) ln K = (2.303 R T / n F) log₁₀ K — EMF–equilibrium constant relation; at temperature T (K).

E (298 K) = E° − (0.05916 / n) log₁₀ Q — Base-10 form of Nernst at 25 °C; E and E° in volts; n in mol e⁻.

E_H⁺/H₂ (298 K, P_H2 = 1 bar) = −0.05916 × pH — Potential of the hydrogen electrode vs SHE at 25 °C; E in volts.

Q_cell = ∏(a_products)^{ν} / ∏(a_reactants)^{ν} — Reaction quotient definition; a: activities (dimensionless), ν: stoichiometric coefficients.

Worked examples

  1. EMF of a Daniell cell at non-standard concentrations
  • Data: E°(Cu²⁺/Cu) = +0.340 V; E°(Zn²⁺/Zn) = −0.763 V; [Cu²⁺] = 1.00 mol·dm⁻³; [Zn²⁺] = 0.100 mol·dm⁻³; T = 298 K.
  • Required: E_cell and direction of electron flow.
  • Steps:
    1. Identify cathode/anode from E°: More positive is Cu²⁺/Cu → cathode; Zn²⁺/Zn → anode.
    2. Compute E°_cell = E°(cathode) − E°(anode) = 0.340 − (−0.763) = 1.103 V.
    3. Overall reaction: Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s); n = 2.
    4. Write Nernst: E_cell = E°_cell − (0.05916/2) log₁₀([Zn²⁺]/[Cu²⁺]) (solids have activity 1).
    5. Substitute: E_cell = 1.103 − (0.05916/2) log₁₀(0.100/1.00).
    6. Compute log₁₀(0.100) = −1.000. So correction term = (0.05916/2) × (−1.000) = −0.02958 V.
    7. E_cell = 1.103 − (−0.02958) = 1.13258 V.
  • Answer: E_cell = 1.133 V (approx.), electrons flow externally from Zn (anode, −) to Cu (cathode, +). Final: 1.133 V.
  1. Equilibrium constant from standard EMF
  • Cell: Zn(s) | Zn²⁺(aq) ∥ Cu²⁺(aq) | Cu(s) at 298 K.
  • Data: E°_cell = 1.103 V; n = 2.
  • Required: K for Zn(s) + Cu²⁺(aq) ⇌ Zn²⁺(aq) + Cu(s) at 298 K.
  • Steps:
    1. Use E°_cell = (0.05916/n) log₁₀ K at 25 °C.
    2. Rearranged: log₁₀ K = (n E°_cell) / 0.05916.
    3. Substitute: log₁₀ K = (2 × 1.103) / 0.05916 = 2.206 / 0.05916 = 37.30.
    4. K = 10^{37.30} ≈ 2.00 × 10^{37}.
  • Answer: K ≈ 2.0 × 10³⁷ (strongly product-favoured).
  1. pH from hydrogen electrode potential
  • Setup: Hydrogen electrode with H₂ at 1 bar immersed in an acid solution at 298 K; potential measured vs SHE.
  • Data: Measured E = −0.177 V vs SHE.
  • Required: pH of the solution.
  • Steps:
    1. For 2H⁺ + 2e⁻ → H₂ (P = 1 bar), E = −0.05916 × pH at 298 K.
    2. Rearranged: pH = −E / 0.05916.
    3. Substitute: pH = −(−0.177) / 0.05916 = 0.177 / 0.05916 = 2.992 ≈ 3.00.
  • Answer: pH ≈ 3.00.

Common mistakes

  • Using concentrations of solids or pure liquids in Q: Their activity is 1 and should not appear.
  • Confusing galvanic vs electrolytic polarity: In galvanic, anode is negative; in electrolytic, anode is positive.
  • Temperature oversight: Using 0.05916 V at temperatures other than 298 K; must use RT/F at actual T.
  • Using oxidation potentials with reduction potentials without consistency; always write both as reductions or both as oxidations consistently.
  • Not balancing redox reactions before computing n and Q.
  • Ignoring junction/IR drop during measurement; in practice, use a high-impedance voltmeter and a salt bridge.

For your exam

  • Short notes: reference electrodes (SHE, SCE, Ag/AgCl) with construction and working; salt bridge and liquid junction potential; cell notation; comparison of galvanic vs electrolytic cells.
  • Derivations: Nernst equation from ΔG = ΔG° + RT ln Q; E°–ΔG°–K relationship; pH vs E for hydrogen electrode at 298 K.
  • Numericals: Compute E_cell from given E° and concentrations; find K from E°; determine pH from electrode potential; concentration cell EMF (if asked).
  • Diagrams: Daniell cell labeled with anode/cathode and electron/ion flows; SHE construction; SCE or Ag/AgCl electrode.
  • What full-marks answers include:
    • Clear definition with all conditions (activities, T, P) and correct units.
    • Balanced redox equations with n identified.
    • Correct formula stated before substitution; all symbols defined; SI units shown in steps.
    • Logical, stepwise derivation with assumptions stated.
    • Neat cell diagrams with labels: electrodes, electrolytes (with concentrations), salt bridge, electron flow, ion movement.
    • Final numeric answers rounded sensibly with significant figures and units, and sign/polarity stated.

Quick check

  1. Define standard electrode potential and state the reference used.
  2. Write the Nernst equation for the hydrogen electrode at 298 K with H₂ at 1 bar, in terms of pH.
  3. Which is cathode in the Daniell cell Zn | Zn²⁺ ∥ Cu²⁺ | Cu, and why?

Answers: 1) E° is the potential of a half-cell written as a reduction when all species have unit activity at 298 K and gases at 1 bar, measured vs the standard hydrogen electrode (SHE, E° = 0 V). 2) E = −0.05916 × pH (volts). 3) Cu²⁺/Cu is the cathode because it has the more positive standard reduction potential.

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?