Hydrogen and biofuels
Hydrogen and biofuels: definitions, production routes (electrolysis, reforming, fermentation, digestion), properties, storage, reactions, formulas (HHV/LHV, Faraday’s law), worked numericals, diagrams to draw, exam tips and quick checks.
Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.
Why it matters
- This topic links to “Batteries and fuel cells” (for fuel cells using hydrogen), “Fuels: calorific value and analysis of coal” (for energy calculations), and “Principles of green chemistry” (for sustainability).
Key ideas
- Energy carrier: A substance that transports or stores energy (e.g., hydrogen), not a primary source by itself. It must be produced using energy from primary sources (fossil fuels, biomass, solar, wind, hydro, nuclear), typically via electricity or heat.
- Hydrogen (H₂) as an energy carrier: Colorless gas, high specific energy (energy per unit mass), burns to water with zero carbon emissions at point of use. Key issue: storage and production impact.
- Biofuel: A fuel derived from biological materials (biomass), such as sugar, starch, oil, or organic waste. Types: bioethanol (alcohol), biodiesel (fatty acid methyl esters), biogas (CH₄-rich gas), biohydrogen (H₂ from biomass routes).
- Higher heating value (HHV) and Lower heating value (LHV): HHV includes the latent heat of condensation of water in products; LHV excludes it (water remains as vapor). For engines and fuel cells that exhaust water vapor, LHV is used.
- Stoichiometric combustion: The exact amount of oxygen needed to fully oxidize fuel to CO₂ and H₂O (and N₂ passes through if air is used). Example reactions given below.
- Green hydrogen: H₂ made by electrolysis using renewable electricity. Blue hydrogen: H₂ from fossil routes (like reforming) with CO₂ captured. Grey hydrogen: H₂ from fossil routes without CO₂ capture.
- Electrolysis: Splitting water into H₂ and O₂ using electricity. Assumptions in ideal derivations: 100% current efficiency and standard conditions unless noted.
- Steam methane reforming (SMR): Reaction of methane with steam to make syngas (CO + H₂), followed by water–gas shift (CO + H₂O → CO₂ + H₂). Industrially dominant but CO₂-intensive unless captured.
- Biomass conversion: Routes include fermentation (sugars → ethanol), anaerobic digestion (organic matter → biogas), transesterification (vegetable oil + alcohol → biodiesel), gasification (biomass → syngas → fuels), and dark/photo fermentation for biohydrogen.
- Storage of hydrogen: (i) Compressed gas in cylinders, (ii) Cryogenic liquid hydrogen (LH₂), (iii) Solid-state storage (metal hydrides, adsorbents). Key trade-offs: mass, volume, energy cost, boil-off.
- Cetane number and Octane number: Measures of ignition quality in diesel and gasoline engines respectively. Biodiesel typically increases cetane when blended with diesel; ethanol increases octane when blended with gasoline. (Full details are covered under “Liquid fuels, cracking and octane number”.)
Exact statements and common derivations
- Stoichiometry of hydrogen combustion
- Exact statement: Under complete combustion in oxygen, hydrogen burns to water: 2 H₂ + O₂ → 2 H₂O. Assumptions: complete conversion, no side products, standard chemical equation balancing.
- In air (≈21% O₂, 79% N₂ by volume), nitrogen is inert: 2 H₂ + O₂ + 3.76 N₂ → 2 H₂O + 3.76 N₂.
- Implication: No CO₂ from hydrogen combustion; however, high-temperature flames can form NOx from air nitrogen unless controlled (dilution, staged combustion, low-temperature fuel cells).
- Electrolysis and Faraday’s laws (for H₂ production)
- Exact statement (Faraday’s first law): The mass of a substance produced at an electrode is directly proportional to the quantity of electricity passed.
- Derived formula: m = (I·t·M)/(n·F), where m is mass of product; I current; t time; M molar mass; n electrons per mole; F Faraday constant. Assumptions: 100% current efficiency (no side reactions).
- For water electrolysis (overall): 2 H₂O(l) → 2 H₂(g) + O₂(g). At the cathode: 2 H₂O + 2 e⁻ → H₂ + 2 OH⁻ (alkaline) or 2 H⁺ + 2 e⁻ → H₂ (acid/PEM). n = 2 for H₂ formation per mole H₂.
- Bioethanol fermentation
- Exact statement: Glucose undergoes anaerobic fermentation to ethanol and carbon dioxide: C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂, catalyzed by yeast, typically 30–35 °C, pH ~4–5. Assumptions: Only glucose; no cell growth losses in theoretical yield.
- Theoretical mass yield of ethanol from glucose: (2 × 46.07) / 180.16 ≈ 0.511 kg ethanol per kg glucose. Real yields are lower due to cell growth and by-products.
- Biodiesel via transesterification
- Exact statement: A triglyceride reacts with a short-chain alcohol (commonly methanol) in presence of a catalyst (NaOH/KOH) to form fatty acid esters (biodiesel) and glycerol: Triglyceride + 3 MeOH → 3 FAME + Glycerol. Assumptions: Complete conversion, excess methanol used in practice to drive equilibrium.
- For free fatty acids (FFAs), an acid-catalyzed esterification step (FFA + MeOH → FAME + H₂O) is often done before base-catalyzed transesterification.
- Anaerobic digestion to biogas
- Exact statement: In absence of oxygen, a sequence of microbial steps (hydrolysis, acidogenesis, acetogenesis, methanogenesis) converts organic matter to biogas (primarily CH₄ and CO₂). A typical model substrate (glucose) overall: C₆H₁₂O₆ → 3 CO₂ + 3 CH₄. Assumptions: Balanced ideal mix; in practice composition varies.
Diagrams to draw and label (describe clearly)
- Hydrogen production map: Draw a block diagram with boxes for “Water electrolysis (PEM/alkaline/SOE)”, “SMR + WGS”, “Coal/biomass gasification”, “Photocatalysis/biological routes”. Arrows to “Hydrogen purification” then to “Storage: compressed, liquid, hydride”. Label key inputs: electricity, water, natural gas, steam, air/oxygen.
- PEM electrolyzer schematic: Two end plates, bipolar plates with flow fields, membrane electrode assembly (MEA) at center. Label: anode (oxygen evolution), cathode (hydrogen evolution), proton exchange membrane, water feed at anode, DC power supply, H₂ and O₂ outlets.
- Biodiesel reactor: Stirred tank with oil feed, methanol + catalyst feed, heating jacket (50–65 °C), separator tank labeled “FAME (top), glycerol (bottom)”, methanol recovery loop.
- Anaerobic digester: Cylindrical tank, feed inlet, mixer, gas dome, gas outlet to H₂S scrubber, effluent outlet. Inside, annotate stages: hydrolysis → acidogenesis → methanogenesis zones (schematic).
- Hydrogen storage options: Three side-by-side sketches: (1) High-pressure cylinder (label pressure like 350–700 bar), (2) Cryogenic dewar (20 K), (3) Hydride bed with heat exchange tubes. Add pros/cons notes beside each (mass, volume, energy cost).
Sustainability and safety notes
- Hydrogen is clean at point of use but total emissions depend on production route; use green electricity for lowest life-cycle CO₂.
- Biofuels can be carbon-neutral if biomass regrowth balances CO₂ emitted; indirect land-use change and fertilizer emissions must be managed.
- Safety: Hydrogen is very light and diffuses fast; wide flammability range in air (about 4–75% by volume). Needs leak detection, ventilation, and ignition source control. Biogas may contain H₂S (toxic, corrosive) and moisture; scrub before use.
Formulas
Complete combustion of hydrogen in oxygen. Stoichiometric basis for air-fuel calculations.
CH₄ + 2 O₂ → CO₂ + 2 H₂OComplete combustion of methane (useful for biogas CH₄ content calculations).HHV = LHV + h_v · m_H2O(products)HHV is higher heating value; LHV is lower heating value;h_vis latent heat of vaporization of water (J/kg);m_H2Ois mass of water formed per unit fuel burned (kg). Applies when products cool to condense water.m = (I · t · M) / (n · F)Faraday’s law for electrolysis. m: mass of product (kg); I: current (A); t: time (s); M: molar mass (kg/mol); n: electrons per mole of product (dimensionless); F: Faraday constant (96485 C/mol). Assumes 100% current efficiency.n = p · V / (R · T)Ideal gas law for moles n (mol); p: absolute pressure (Pa); V: volume (m³); R: gas constant (8.314 J·mol⁻¹·K⁻¹); T: temperature (K). Applies for ideal gases or as a first approximation for compressed hydrogen (note deviations at high p).ρ = p · M / (R · T)Ideal gas density ρ (kg/m³); p pressure (Pa); M molar mass (kg/mol); R gas constant (J·mol⁻¹·K⁻¹); T temperature (K). Use cautiously for hydrogen at high pressure.Energy = m · LHVEnergy released (J); m mass of fuel (kg); LHV lower heating value (J/kg). Use LHV for engines/fuel cells exhausting water vapor.Yield_ethanol,theoretical = 2 · M_ethanol / M_glucose ≈ 0.511 kg/kgFrom fermentation stoichiometry; applies to pure glucose substrate theoretical yield.Biogas CH₄ volume = x_CH4 · V_biogasVolume of methane in biogas (m³) from CH₄ mole/volume fractionx_CH4and total biogas volumeV_biogas(m³). Use for energy estimates with methane LHV per m³ at STP.E_CH4,STP ≈ 35.8 MJ/m³Approximate LHV energy content of methane per cubic metre at STP. Use for quick biogas energy estimates.Hydrogen HHV ≈ 142 MJ/kg, LHV ≈ 120 MJ/kgTypical values for H₂. Use consistently; state which one you use.
Worked examples
- Hydrogen needed for a given energy and storage volume estimate Given: Required net energy output = 60 MJ using hydrogen; use LHV = 120 MJ/kg. Find (a) mass of H₂ needed, (b) its volume at STP using density ρ_STP ≈ 0.0899 kg/m³, (c) approximate volume at 700 bar and 298 K using ideal gas scaling from STP (1 bar, 273 K).
Steps:
- Formula: Energy = m · LHV m = Energy / LHV = 60 MJ / 120 MJ·kg⁻¹ = 0.5 kg. Answer (a): m_H2 = 0.5 kg.
- Volume at STP: V = m / ρ_STP = 0.5 kg / (0.0899 kg·m⁻³) ≈ 5.56 m³. Answer (b): V_STP ≈ 5.56 m³.
- Ideal-gas volume scaling: V ∝ (T/p). From STP (p₁ = 1 atm = 1.01325 bar, T₁ = 273 K) to storage (p₂ = 700 bar, T₂ = 298 K): V₂ = V₁ · (T₂/T₁) · (p₁/p₂) = 5.56 · (298/273) · (1.01325/700) m³ ≈ 0.00879 m³ = 8.79 L. Final: (c) V_700bar,ideal ≈ 8.8 L for 0.5 kg H₂. Note: Real-gas effects make actual volume larger; this is a first approximation.
Final answers: (a) 0.5 kg H₂, (b) 5.56 m³ at STP, (c) about 8.6 L at 700 bar (ideal-gas estimate).
- Ethanol from glucose by fermentation — theoretical and practical yield Given: Fermenter feed has 1800 kg of fermentable glucose equivalent. The process achieves 90% of theoretical yield. Find ethanol mass produced. Use M_glucose = 180.16 g/mol, M_ethanol = 46.07 g/mol; theoretical yield = 0.511 kg/kg.
Steps:
- Theoretical ethanol = 0.511 × 1800 kg = 920 kg (rounded from 919.8 kg).
- Practical ethanol at 90% = 0.90 × 920 kg = 828 kg.
Final answer: About 828 kg of ethanol.
- Energy from biogas volume with given composition Given: Daily biogas production = 200 m³ at STP; composition: 60% CH₄, 40% CO₂ by volume. Find daily energy in MJ using methane LHV ≈ 35.8 MJ/m³ at STP. Assume CO₂ contributes zero energy.
Steps:
- Methane volume = x_CH4 · V_total = 0.60 × 200 m³ = 120 m³ CH₄.
- Energy = 120 m³ × 35.8 MJ/m³ = 4296 MJ.
Final answer: Daily energy ≈ 4.30 × 10³ MJ.
Theory model answer — Short note on biodiesel production (outline you can adapt in exams)
- Definition: Biodiesel is a mixture of fatty acid alkyl esters (usually methyl esters, FAME) produced from vegetable oils or animal fats by transesterification with methanol.
- Chemistry: Triglyceride + 3 MeOH → 3 FAME + Glycerol; base catalyst (NaOH/KOH), 50–65 °C, atmospheric pressure. Often use excess methanol (e.g., 6:1 molar ratio) to push equilibrium.
- Process steps: (i) Feed pretreatment (remove water/FFAs via esterification), (ii) Base-catalyzed transesterification in a stirred reactor, (iii) Phase separation (glycerol layer), (iv) Methanol recovery, (v) Washing/polishing of FAME, (vi) Glycerol refining.
- Properties: Higher cetane than petro-diesel, near-zero sulfur, oxygen content improves combustion but slightly lowers volumetric energy density. Good lubricity. Cold-flow issues depend on feedstock (saturated FAME increase pour/cloud point).
- Blending: Common blends B5, B20, B100 (number = percentage biodiesel by volume). Ensure compatibility with seals and filters.
- Applications: Compression-ignition engines with minimal modification up to certain blends; emission reductions in PM, CO, HC; NOx may slightly increase depending on engine calibration.
Common mistakes
- Forgetting water formation when computing HHV–LHV differences.
- Using ideal gas law at very high hydrogen pressures without noting non-ideality or temperature effects.
- Treating biogas CO₂ as combustible in energy calculations; only CH₄ contributes significantly to LHV.
- Writing wrong stoichiometric coefficients (e.g., CH₄ + O₂ → CO₂ + H₂O without balancing to 2 O₂ and 2 H₂O).
- In Faraday’s law problems, using n = 1 for H₂ generation; correct is n = 2 electrons per mole of H₂.
- Ignoring mass balances around biodiesel reactor (glycerol phase carries methanol and catalyst; needs recovery) in theory answers.
- Not labeling diagram parts clearly (electrolyzer: anode/cathode reversed; digester missing gas cleaning like H₂S scrubber).
For your exam
- Short notes: Hydrogen storage methods with pros/cons; hydrogen safety; biogas composition and purification; routes to biohydrogen; comparison of ethanol vs biodiesel vs biogas (feedstock, process, use).
- Diagrams: PEM/alkaline electrolyzer labeled; biodiesel plant flow sketch; anaerobic digester with stages; hydrogen storage comparison. Draw neat boxes, arrows, and label all streams.
- Derivations/stoichiometry: Balance combustion equations; derive ethanol theoretical yield; apply Faraday’s law to calculate H₂ rate in an electrolyzer.
- Numericals: Energy from given mass/volume of hydrogen/biofuel; volume of compressed hydrogen; ethanol yield from sugar; energy from biogas with given CH₄ fraction. Always state assumptions (LHV used, STP basis, ideal gas) and carry units.
- Cross-references: If fuel cells are asked, keep it brief and refer to the “Batteries and fuel cells” topic for detailed mechanisms; here focus on hydrogen as a fuel and its production/storage.
Quick check
- Define LHV and HHV. Which one would you use for engine fuel economy and why?
- Write balanced equations for (a) combustion of hydrogen in oxygen and (b) fermentation of glucose to ethanol.
- A biogas stream is 55% CH₄ by volume at STP. How much methane (m³) is in 50 m³ of biogas, and what is its energy (MJ) using 35.8 MJ/m³?
Answers: 1) LHV excludes latent heat of water in products; HHV includes it. Use LHV for engines because exhaust water is not condensed. 2a) 2 H₂ + O₂ → 2 H₂O; 2b) C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂. 3) Methane volume = 0.55 × 50 = 27.5 m³; Energy ≈ 27.5 × 35.8 = 985 MJ (approx.).
Finished this topic? Mark it so your progress, study plan and readiness keep up.
Stuck on something here?