Deflection of beams

Deflection of beams: slope–deflection relations, moment–curvature, double integration, Macaulay/area-moment/conjugate-beam methods, and standard results for common loadings.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Beam deflection governs serviceability: too much sag causes misalignment of machine shafts, vibration, door/window jamming, and poor ride/feel in products. Knowing how to predict slope and deflection lets you size members, choose materials, and place supports so devices work quietly and accurately throughout life.

Key ideas

  • Beam deflection starts from the Euler–Bernoulli beam hypothesis:
    • Plane sections remain plane and normal to the neutral axis after bending (neglects shear deformation). Material is linear-elastic, homogeneous, isotropic with constant Young’s modulus E in the segment. Small slopes (|dy/dx| ≪ 1) so geometric nonlinearity is negligible. The beam is slender (span/depth large), and warping of cross-sections is negligible.
  • Neutral-axis kinematics and bending stress distribution:
    • A fiber at distance y from the neutral axis has strain ε = −y/R, where R is the radius of curvature; stress σ = E ε = −E y/R. Integrating σ over the section gives the bending moment M = ∫σ y dA = (E/R)∫y² dA = (E I)/R, where I is the second moment of area about the neutral axis. Therefore the exact statement of the bending curvature law is: 1/R = M/(E I).
    • Under small-slope assumption, curvature κ ≈ d²y/dx², so the moment–curvature relation becomes: E I d²y/dx² = M(x).
  • Load–shear–moment–slope–deflection chain (for the x-axis along the beam from the left support):
    • Load intensity w(x) (N/m) → shear: dV/dx = +w(x).
    • Shear force V(x) (N) → moment: dM/dx = +V(x).
    • Bending moment M(x) (N·m) → slope and deflection: E I d²y/dx² = M(x), θ(x) = dy/dx.
  • Sign conventions (use consistently):
    • Take x to the right, y positive downward. Downward loads w are positive. Sagging bending moments (concave up deflection; tension at the bottom fibers) are positive M. Slope θ = dy/dx is positive when the deflection curve falls downward to the right.
  • Boundary conditions typical in exams:
    • Simply supported (pin/roller) at x = a: y(a) = 0. Slope θ(a) is generally not zero.
    • Fixed end at x = a: y(a) = 0 and θ(a) = 0.
    • Free end: no support; internal end conditions arise from loads (shear/moment zero if no applied shear/moment there).
  • Methods to compute deflection:
    1. Double-integration method: Find M(x) from statics; integrate E I y'' = M(x) twice to get θ and y; apply boundary conditions to find constants. Good for simple piecewise loads.
    2. Macaulay’s method (singularity functions): Write M(x) in one expression using bracket functions ⟨x − a⟩ⁿ that equal (x − a)ⁿ for x > a and 0 otherwise; integrate across discontinuities in a single pass and apply boundary conditions. This avoids many case splits.
    3. Mohr’s area–moment theorems (exact statements):
      • Theorem 1 (slope change): The change in slope between two points A and B on a beam equals the area of the M/(E I) diagram between A and B, with sign.
      • Theorem 2 (deflection relative to tangent): The deflection of point B measured from the tangent drawn at A equals the first moment of area of the M/(E I) diagram between A and B about point B, with sign. Use for quick slope/deflection between notable points (e.g., midspan) without full integration.
    4. Conjugate beam method: Create a “conjugate” beam with the same length, load it by w̄(x) = M(x)/(E I). Then shear V̄ at a section equals the real slope θ, and moment M̄ equals the real deflection y at that section. End-condition mapping to satisfy boundary conditions:
      • Real fixed end ↔ conjugate free end (since y = 0 and θ = 0 ↔ M̄ = 0 and V̄ = 0).
      • Real free end ↔ conjugate fixed end (since y and θ free ↔ M̄ and V̄ can be reactions).
      • Real simple support ↔ conjugate simple support (since y = 0 ↔ M̄ = 0; θ free ↔ V̄ not prescribed).
  • Standard results (prismatic beam, constant E and I) often tested:
    • Cantilever, point load P at free end:
      • Slope at free end: θ = P L²/(2 E I)
      • Deflection at free end: δ = P L³/(3 E I)
    • Cantilever, uniform load w over full span:
      • Slope at free end: θ = w L³/(6 E I)
      • Deflection at free end: δ = w L⁴/(8 E I)
    • Cantilever, applied end moment M₀ at free end:
      • Slope at free end: θ = M₀ L/(E I)
      • Deflection at free end: δ = M₀ L²/(2 E I)
    • Simply supported, central point load P:
      • Maximum deflection at midspan: δmax = P L³/(48 E I)
      • Slope at supports: θsupport = P L²/(16 E I)
    • Simply supported, uniform load w over full span:
      • Maximum deflection at midspan: δmax = 5 w L⁴/(384 E I)
      • Slope at supports: θsupport = w L³/(24 E I)
  • Where these come from (derivation outline):
    • Use statics to get M(x) on each span. Apply E I y'' = M(x). Integrate once to get θ(x) and again to get y(x). Apply boundary conditions such as y = 0 at supports and θ = 0 at fixed ends to solve constants. For Mohr’s theorems, construct the M/(E I) diagram; then areas give slope changes and first moments give deflections.
  • Ideal vs real behavior:
    • Real beams have shear deformation (important for deep beams) and rotational inertia/shear flexibility under dynamics; Timoshenko beam theory captures this (beyond this topic). Supports and connections have flexibility and settlements, and materials can be nonlinear (plasticity, creep). Large deflections require geometric nonlinearity (P–Δ effects). Always check the small-deflection assumption, E and I variability, and boundary realism.

Formulas

1/R = M / (E·I) — curvature–moment law; R: radius of curvature (m), M: bending moment (N·m), E: Young’s modulus (Pa = N/m²), I: second moment of area (m⁴). Applies to Euler–Bernoulli beams in pure bending.

E·I · d²y/dx² = M(x) — elastic curve equation; y: deflection (m), x: coordinate along span (m). Small slopes, prismatic segment with given E·I.

dV/dx = w(x), dM/dx = V(x) — load–shear–moment relations; w: load intensity (N/m), V: shear force (N), M: bending moment (N·m). Valid for static beam equilibrium with positive convention defined.

E·I · d⁴y/dx⁴ = w(x) — beam differential equation combining the above; same symbols. Applies where E and I are constant over the considered segment and distributed loading w(x) exists.

θ(x) = dy/dx — slope (dimensionless, radians). Small-angle assumption.

δcantilever,end‑P = P·L³ / (3·E·I) — free-end deflection of a cantilever under end point load P (N) on span L (m); E (Pa), I (m⁴). Max deflection at free end.

θcantilever,end‑P = P·L² / (2·E·I) — free-end slope for cantilever with end load P.

δcantilever,end‑w = w·L⁴ / (8·E·I) — free-end deflection of cantilever with uniform load w (N/m).

θcantilever,end‑w = w·L³ / (6·E·I) — free-end slope for cantilever with uniform load w.

δcantilever,end‑M0 = M0·L² / (2·E·I) — free-end deflection of cantilever with end moment M0 (N·m).

θcantilever,end‑M0 = M0·L / (E·I) — free-end slope for cantilever with end moment M0.

δss,mid‑P = P·L³ / (48·E·I) — maximum deflection at midspan of a simply supported beam with central point load P.

θss,support‑P = P·L² / (16·E·I) — slope at either support for simply supported beam with central load P.

δss,mid‑w = 5·w·L⁴ / (384·E·I) — maximum deflection at midspan of simply supported beam with uniform load w.

θss,support‑w = w·L³ / (24·E·I) — slope at either support for simply supported beam with uniform load w.

⟨x − a⟩ⁿ = (x − a)ⁿ for x > a, and 0 for x ≤ a — Macaulay bracket definition; used to write piecewise loads/moments compactly.

Worked examples

Example 1 — Direct application (cantilever with end load) Given: Cantilever beam, length L = 2.0 m; end point load P = 1000 N (downward); E = 200 GPa; I = 4.0×10⁻⁶ m⁴. Find slope and deflection at the free end. Assumptions: Euler–Bernoulli, small deflection, prismatic beam, fixed at x = 0.

Steps:

  1. Formula for slope at free end (cantilever, end load): θ = P·L² / (2·E·I)
    • Numbers: θ = 1000 N · (2.0 m)² / (2 · 200×10⁹ Pa · 4.0×10⁻⁶ m⁴)
    • Compute: numerator = 1000 · 4 = 4000 N·m²; denominator = 2 · 200×10⁹ · 4×10⁻⁶ = 2 · 800,000 = 1,600,000 N·m²
    • θ = 4000 / 1.6×10⁶ = 0.00250 rad
  2. Formula for deflection at free end: δ = P·L³ / (3·E·I)
    • Numbers: δ = 1000 N · (2.0 m)³ / (3 · 200×10⁹ Pa · 4.0×10⁻⁶ m⁴)
    • Compute: L³ = 8.0 m³ → numerator = 8000 N·m³; denominator = 3 · 200×10⁹ · 4×10⁻⁶ = 3 · 800,000 = 2,400,000 N·m²
    • δ = 8000 / 2.4×10⁶ = 0.003333 m = 3.33 mm

Answer: θfree = 0.00250 rad (≈ 0.143°), δfree = 3.33 mm (downward).

Example 2 — Combined loading with superposition (GATE-style) A simply supported steel beam of span L = 6.0 m carries: (i) a central point load P = 12 kN, and (ii) a uniform load w = 3 kN/m over the full span. The section has I = 6.0×10⁻⁶ m⁴. Take E = 200 GPa. Find (a) the maximum deflection, and (b) the slope at the supports. Assumptions: Euler–Bernoulli, small deflection, prismatic beam, pin/roller supports at ends.

Data (SI): P = 12,000 N; w = 3000 N/m; L = 6.0 m; E = 200×10⁹ Pa; I = 6.0×10⁻⁶ m⁴; E·I = 1.200×10⁶ N·m².

Because both loads are symmetric about midspan, the maximum deflection occurs at midspan, and slopes at the two supports are equal in magnitude. Use superposition: total response = sum of responses to each load separately (linear system).

(a) Maximum deflection at midspan

  1. Due to central point load:
    • Formula: δP,max = P·L³ / (48·E·I)
    • Numbers: δP,max = (12,000 N) · (6.0 m)³ / (48 · 1.200×10⁶ N·m²)
    • Compute: L³ = 216 m³ → numerator = 2,592,000 N·m³; denominator = 57,600,000 N·m²
    • δP,max = 2.592×10⁶ / 57.6×10⁶ = 0.0450 m = 45.0 mm (downward)
  2. Due to uniform load over full span:
    • Formula: δw,max = 5·w·L⁴ / (384·E·I)
    • Numbers: δw,max = 5 · (3000 N/m) · (6.0 m)⁴ / (384 · 1.200×10⁶ N·m²)
    • Compute: L⁴ = 1296 m⁴; numerator = 5 · 3000 · 1296 = 19,440,000 N·m³; denominator = 460,800,000 N·m²
    • δw,max = 19.44×10⁶ / 460.8×10⁶ = 0.0421875 m = 42.19 mm (downward)
  3. Superpose: δmax,total = 45.0 mm + 42.19 mm = 87.19 mm (downward)

(b) Slope at either support

  1. Due to central point load:
    • Formula: θP,support = P·L² / (16·E·I)
    • Numbers: θP,support = 12,000 N · (6.0 m)² / (16 · 1.200×10⁶ N·m²)
    • Compute: L² = 36 m² → numerator = 432,000 N·m²; denominator = 19,200,000 N·m²
    • θP,support = 432,000 / 19.2×10⁶ = 0.0225 rad
  2. Due to uniform load over full span:
    • Formula: θw,support = w·L³ / (24·E·I)
    • Numbers: θw,support = 3000 N/m · (6.0 m)³ / (24 · 1.200×10⁶ N·m²)
    • Compute: L³ = 216 m³ → numerator = 648,000 N·m²; denominator = 28,800,000 N·m²
    • θw,support = 648,000 / 28.8×10⁶ = 0.0225 rad
  3. Superpose: θsupport,total = 0.0225 + 0.0225 = 0.0450 rad ≈ 2.58°

Answer: (a) δmax = 87.19 mm downward at midspan. (b) θsupport = 0.0450 rad at each support.

Common mistakes

  • Forgetting that radians are dimensionless: insert degrees into formulas without converting (1 rad ≈ 57.2958°).
  • Wrong sign convention: using sagging positive in SFD/BMD but then taking y upward positive in integration without adjusting signs.
  • Missing/incorrect boundary conditions: especially setting θ = 0 at a simple support (it is generally nonzero).
  • Using wrong I: confusing Izz for a different axis, or forgetting to convert mm⁴ to m⁴ (1 mm⁴ = 10⁻¹² m⁴).
  • Applying standard formulas to the wrong loading or span condition (e.g., using central-load result for an off-center load; using cantilever formula on a propped cantilever).
  • Overlooking superposition limits: superposition applies only in linear-elastic small-deflection regime with unchanged boundary conditions.

For GATE ME

  • Quick computations with standard cases: cantilever (end P, UDL), simply supported (central P, full UDL) for δmax and θsupport. Memorize the constants (1/3, 1/8, 1/48, 5/384, 1/16, 1/24, etc.) and know when each applies.
  • Double-integration/Macaulay: given a simply supported or cantilever beam with one or two point loads and/or partial UDLs, find deflection at a specified point and/or location of maximum deflection. Practise writing M(x) with bracket functions and applying boundary/continuity conditions.
  • Area–moment or conjugate-beam shortcuts: find slope at a support or deflection at midspan by reading areas and first moments of the M/(E I) diagram, or by a single conjugate-beam shear/moment evaluation.
  • Property inference: back-calculate E or I from a measured deflection under a known load, or check whether a candidate section meets a deflection limit (e.g., L/δ). You may be given b, h of a rectangular section to compute I = b·h³/12 and then check δ.
  • Mixed loadings and superposition: combine contributions from a point load and a UDL, or from multiple point loads, to get slopes/deflections. Be fluent with adding results and identifying the critical location (often midspan for symmetric loads).
  • Edge notes: Indeterminate beams (e.g., propped cantilever) sometimes appear but typically require compatibility (deflection zero at prop) and either the conjugate-beam/area–moment approach or energy methods (Castigliano) — if asked, keep to this topic’s tools and reference Energy methods by name.

Quick check

  1. State the Euler–Bernoulli moment–curvature relation and its small-slope form for the elastic curve.
  2. What is the maximum deflection of a simply supported beam of span L under a full-span UDL w, in terms of E and I? State the location too.
  3. In the conjugate beam method, what is the conjugate support corresponding to a fixed end in the real beam, and what quantity does the conjugate bending moment represent?

Answers: 1) 1/R = M/(E·I); with small slopes, E·I·d²y/dx² = M(x). 2) δmax = 5·w·L⁴/(384·E·I) at midspan. 3) Real fixed end ↔ conjugate free end; conjugate bending moment equals the real deflection at that section.

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?