First Year Engineering is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Superconductivity

Superconductivity: zero electrical resistance, Meissner effect, London and BCS theories, Type I/II behavior, critical fields/currents, flux quantization, and applications.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Superconductors carry very large currents with essentially zero energy loss and expel magnetic fields, enabling compact, strong magnets and highly sensitive sensors. Engineers meet superconductivity in MRI and NMR magnets, particle accelerators, maglev trains, superconducting power devices (cables, fault current limiters), and emerging quantum technologies.

Key ideas

  • Both properties together define superconductivity. Zero resistivity alone (as in an ideal perfect conductor) is not sufficient; the Meissner effect is the distinguishing thermodynamic signature.

  • Meissner effect (exact statement for exams)

    • “When a material is cooled below its critical temperature Tc in the presence of a magnetic field, it expels magnetic flux from its interior and becomes perfectly diamagnetic; this is called the Meissner effect.”
    • It implies the superconducting state is a new thermodynamic phase with its own equilibrium magnetic response, not just infinite conductivity.
    • Diagram to draw: A rectangular slab. Panel 1 (normal state): uniform magnetic field lines pass through the slab. Panel 2 (superconducting state): field lines bend around the slab; inside, label B ≈ 0. Add a thin boundary layer of thickness λ (penetration depth) where field decays.
  • Critical parameters

    • Critical temperature (Tc): the temperature below which the material becomes superconducting at zero applied magnetic field.
    • Critical magnetic field (Hc): the maximum applied magnetic field the superconductor can withstand before reverting to the normal state (Type I). Empirically for Type I: Hc(T) = Hc(0)[1 − (T/Tc)²].
    • Critical current density (Jc): the maximum current density the superconductor can carry without quenching back to the normal state; associated with self-field and depinning of magnetic vortices in Type II.
  • Type I and Type II superconductors

    • Type I: Single critical field Hc. Below Hc, complete Meissner state (B ≈ 0 in bulk); above Hc, normal state. Soft metals like Pb, Hg, Sn are classic examples.
    • Type II: Two critical fields Hc1 and Hc2. For H < Hc1: Meissner state. For Hc1 < H < Hc2: mixed (vortex) state where quantized vortices thread the sample and carry magnetic flux; for H > Hc2: normal state. Most practical, high-field superconductors (e.g., NbTi, Nb3Sn, and high-Tc cuprates) are Type II.
    • Diagram to draw: M–H curves. For Type I: linear diamagnetism up to Hc, then abrupt drop to normal. For Type II: linear up to Hc1, then gradual approach to normal magnetization by Hc2. Label Hc, or Hc1 and Hc2, and indicate Meissner and mixed regions.
  • London equations (phenomenology and penetration depth)

    • Assumptions: Below Tc, a fraction ns of electrons condense into a superfluid of density ns with effective mass m* and charge −e per electron (−2e for a Cooper pair; in London’s form, ns often refers to electron density contributing to superconductivity). Neglect normal electrons at T ≪ Tc; ignore scattering.
    • First London equation (acceleration under E): ∂Js/∂t = (ns e²/m*) E. It implies infinite DC conductivity (steady E = 0 in the super state under DC conditions).
    • Second London equation (links current to magnetic field): ∇ × Js = −(ns e²/m*) B.
    • Combine with Ampère’s law ∇ × B = μ0 Js to get ∇²B = B/λL², with the London penetration depth λL = √(m*/(μ0 ns e²)). Inside a superconductor, a static magnetic field decays exponentially from the surface: B(x) = B0 e^(−x/λL).
    • Diagram to draw: Semi-infinite slab (x ≥ 0), surface at x = 0, external field B0 applied along z; inside slab show B(x) decaying exponentially; label λL.
  • Coherence length and Ginzburg–Landau parameter

    • Coherence length (ξ): a characteristic length over which the superconducting order parameter (magnitude of the condensate wavefunction) heals. Microscopic (BCS) ξ0 is typically tens to hundreds of nanometers for conventional superconductors (material dependent).
    • Ginzburg–Landau parameter (κ): κ = λL/ξ. Classification: Type I if κ < 1/√2; Type II if κ > 1/√2.
  • Flux quantization and vortices

    • In a superconducting loop, magnetic flux is quantized in units of the flux quantum Φ0 = h/(2e) ≈ 2.068×10⁻¹⁵ Wb.
    • In Type II superconductors for Hc1 < H < Hc2, flux enters as Abrikosov vortices; each vortex carries one Φ0 and has a normal-core radius ∼ ξ, with supercurrents circulating over ∼ λL.
  • BCS theory (microscopic picture; what to state)

    • Electrons near the Fermi surface form Cooper pairs via an effective attractive interaction mediated by lattice vibrations (phonons). Pairing leads to an energy gap Δ in the electronic density of states.
    • Key results in weak-coupling BCS:
      • Energy gap ratio: 2Δ(0)/(kB Tc) ≈ 3.52.
      • Specific-heat jump at Tc: ΔC/(γ Tc) ≈ 1.43, where γ is the normal-state electronic specific heat coefficient.
      • Isotope effect: Tc ∝ M^(-α) with α ≈ 0.5 for simple superconductors (M is ionic mass), supporting the phonon mechanism.
    • Note: Many high-Tc cuprates and unconventional superconductors deviate from simple BCS predictions.
  • Distinguishing a perfect conductor from a superconductor (exam idea)

    • Perfect conductor (σ → ∞) without Meissner would freeze-in magnetic flux present at the transition; it would not expel a pre-existing static field when cooled. A superconductor expels it (Meissner). London equations enforce Meissner expulsion.
  • Applications (brief pointers; details are separate topics)

    • MRI/NMR magnets, accelerator magnets, maglev, fault current limiters, superconducting cables, microwave resonators and filters, SQUIDs (Josephson effect and SQUID are covered elsewhere), and qubits in quantum computing (covered elsewhere).
  • Material classes and practical notes

    • Low-Tc metallic superconductors (NbTi, Nb3Sn) used with liquid He cooling; high-Tc cuprates (e.g., YBCO) work with liquid N2 cooling, typically as coated conductors with engineered pinning to raise Jc.
  • Common experimental signatures

    • Resistivity ρ(T) drops sharply to instrument noise floor at Tc; magnetic susceptibility shows strong diamagnetic signal below Tc; specific heat shows a jump at Tc.
  • Typical derivation: Field decay from London equation

    1. Start from ∇ × Js = −(ns e²/m*) B and Ampère’s law ∇ × B = μ0 Js.
    2. Take curl of Ampère’s law: ∇ × (∇ × B) = μ0 ∇ × Js.
    3. Use vector identity ∇ × (∇ × B) = ∇(∇·B) − ∇²B and ∇·B = 0 to get −∇²B = μ0 ∇ × Js.
    4. Substitute London equation: −∇²B = μ0 [ −(ns e²/m*) B ] ⇒ ∇²B = B/λL².
    5. For a semi-infinite slab (field varying only with depth x), this gives d²B/dx² = B/λL² with solution B(x) = B0 e^(−x/λL), matching boundary conditions at the surface.

Formulas

  • ∂Js/∂t = (ns e²/m*) · E

    • Js: superconducting current density (A·m⁻²), ns: superfluid electron density (m⁻³), e: elementary charge (C), m*: effective mass (kg), E: electric field (V·m⁻¹). First London equation; low-frequency response.
  • ∇ × Js = −(ns e²/m*) · B

    • B: magnetic flux density (T), μ0: vacuum permeability (N·A⁻² or H·m⁻¹). Second London equation; steady magnetic fields.
  • λL = √(m*/(μ0 ns e²))

    • λL: London penetration depth (m). Valid well below Tc where ns is large and uniform.
  • B(x) = B0 · e^(−x/λL)

    • Field decay inside a semi-infinite superconductor (magnitude along surface-normal x). B0: surface field (T).
  • κ = λL/ξ

    • κ: Ginzburg–Landau parameter (dimensionless), ξ: coherence length (m). Type I if κ < 1/√2, Type II if κ > 1/√2.
  • Φ0 = h/(2e) ≈ 2.068 × 10⁻¹⁵ Wb

    • Φ0: flux quantum (weber), h: Planck constant (J·s), e: elementary charge (C). Applies to flux quantization and vortex flux.
  • Jc = Ic/A

    • Jc: critical current density (A·m⁻²), Ic: critical current (A), A: cross-sectional area (m²).
  • Bc2 ≈ Φ0/(2π ξ²)

    • Upper critical field estimate for Type II (in tesla). Equivalently, Hc2 = Bc2/μ0 (A·m⁻¹). In Ginzburg–Landau theory near Tc, Bc2(T) = Φ0/[2π ξ(T)²]; using ξ(0) gives an order-of-magnitude estimate at low T.
  • ρ = 0 (DC) in the superconducting state, and χ ≈ −1 (volume susceptibility, SI) in Meissner state

    • ρ: resistivity (Ω·m), χ: dimensionless susceptibility. Ideal behaviors for bulk superconductors in weak fields.
  • Tc ∝ M^(−α) with α ≈ 0.5 (isotope effect; simple superconductors)

    • Tc: critical temperature (K), M: ionic mass (kg or atomic mass units), α: isotope exponent (dimensionless).
  • 2Δ(0) ≈ 3.52 · kB · Tc

    • Δ(0): zero-temperature superconducting energy gap (J), kB: Boltzmann constant (J·K⁻¹). BCS weak-coupling result.

Worked examples

  1. Temperature dependence of the critical field (Type I)

    • Given: A Type I superconductor with Tc = 7.0 K and Bc(0) = 0.080 T (here Bc = μ0 Hc; we use Bc in tesla for convenience). Find the critical field at T = 4.2 K.
    • Steps:
      1. Formula: Bc(T) = Bc(0) · [1 − (T/Tc)²] (using Bc = μ0 Hc as given).
      2. Numbers: T/Tc = 4.2/7.0 = 0.6; (T/Tc)² = 0.36; 1 − 0.36 = 0.64.
      3. Bc(T) = 0.080 T × 0.64 = 0.0512 T.
    • Answer: The critical field at 4.2 K is approximately 0.051 T.
    • Note: Many texts quote Bc (tesla) rather than Hc (A·m⁻¹); ensure consistent use. If using Hc in A·m⁻¹, convert with Bc = μ0 Hc.
  2. Critical current of a superconducting wire

    • Given: Round wire of radius r = 0.50 mm carrying supercurrent; critical current density Jc = 1.5 × 10⁷ A·m⁻². Find the maximum DC current Ic.
    • Steps:
      1. Cross-sectional area: A = π r² = π (0.50 × 10⁻³ m)² = π × 0.25 × 10⁻⁶ m² = 0.7854 × 10⁻⁶ m².
      2. Formula: Ic = Jc · A.
      3. Numbers: Ic = (1.5 × 10⁷ A·m⁻²) × (0.7854 × 10⁻⁶ m²) = 11.781 A.
    • Answer: The maximum current is approximately 11.8 A.
    • Comment: In practice, Jc depends on temperature, field, and microstructure (flux pinning).
  3. Flux quantization in a superconducting loop

    • Given: A thin superconducting ring encloses uniform magnetic flux Φ = 1.03 × 10⁻¹³ Wb. How many flux quanta thread the loop?
    • Steps:
      1. Formula: n = Φ/Φ0, where Φ0 ≈ 2.068 × 10⁻¹⁵ Wb.
      2. Numbers: n = (1.03 × 10⁻¹³) / (2.068 × 10⁻¹⁵) ≈ 49.83.
      3. The integer closest to this is n = 50 (the system settles into the nearest allowed integer fluxoid state).
    • Answer: The loop contains 50 flux quanta.

Common mistakes

  • Using cgs/emu formulas in an SI answer (e.g., forgetting μ0 in London equations).
  • Assuming a perfect conductor (σ → ∞) would expel static magnetic fields; only a superconductor in the Meissner state does.
  • Confusing Type I and Type II behaviors, especially Hc vs Hc1/Hc2 and the mixed state.
  • Forgetting that Jc, Hc1, and Hc2 are temperature- and microstructure-dependent.
  • Applying BCS gap ratio 3.52 to all superconductors without stating it is the weak-coupling value and may not fit unconventional materials.

For your exam

  • Derivations: From London equations to ∇²B = B/λ² and exponential field decay; empirical Hc(T) law and its typical use; GL parameter κ and the criterion κ ≶ 1/√2.
  • Numericals: Use Hc(T) relation; compute Ic from Jc and geometry; flux quantization counts; estimate Bc2 from ξ using Bc2 = Φ0/(2π ξ²). Carry units and state assumptions.
  • Diagrams: Meissner expulsion in a slab; B(x) decay with λ; M–H curves for Type I and Type II with Hc, Hc1, Hc2; schematic of a vortex (core ∼ ξ, circulating currents over λ) if asked.
  • Full-marks answers: Start with precise definitions, state assumptions, present clean derivations with correct vector relations and μ0 factors, include neat labeled diagrams, and finish with physical interpretation and units.

Quick check

  1. State the Meissner effect in one sentence.
  2. What distinguishes Type I from Type II superconductors in terms of magnetic response?
  3. Give the expression for the London penetration depth λL and explain what increases λL.

Answers: (1) On cooling below Tc in a magnetic field, a superconductor expels magnetic flux from its interior and becomes perfectly diamagnetic (Meissner effect). (2) Type I has a single critical field Hc and a complete Meissner state below it; Type II has two critical fields Hc1 and Hc2 with a mixed (vortex) state for Hc1 < H < Hc2. (3) λL = √(m*/(μ0 ns e²)); λL increases if the superfluid density ns decreases or the effective mass m* increases.

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?