Josephson effect and SQUID
Josephson effect (DC/AC) and SQUID operation, formulas, derivations, and applications as ultra-sensitive magnetometers and voltage standards.
Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.
Why it matters
Engineers use the Josephson effect in superconducting electronics for ultra-stable voltage standards, high-speed logic, and ultra-sensitive magnetic field measurements with SQUIDs (Superconducting Quantum Interference Devices). SQUIDs detect extremely small magnetic flux changes (down to 10⁻¹⁵ Wb and below), enabling applications in geophysics, non-destructive testing, biomagnetism (MEG), superconducting qubits readout, and materials characterization.
Key ideas
- Definition: A Cooper pair is a bound pair of electrons in a superconductor that behaves as a composite boson with charge 2e and forms a coherent macroscopic quantum state described by a complex order parameter.
- Definition: A Josephson junction (JJ) is a weak link between two superconductors, realized by a thin insulating barrier (S–I–S), a constriction, or a normal metal (S–N–S), across which Cooper pairs can tunnel.
- Statement (DC Josephson effect): “In a Josephson junction with zero applied voltage, a supercurrent flows given by I_s = I_c sin φ, where I_c is the critical current and φ is the phase difference between the superconducting order parameters on the two sides.” Assumptions: temperature well below Tc; coherent tunnelling of Cooper pairs; negligible thermal/quantum phase slips; no significant normal current (V = 0 branch).
- Statement (AC Josephson effect): “If a constant DC voltage V is applied across a Josephson junction, the phase difference increases linearly in time as dφ/dt = 2eV/ħ, producing an AC supercurrent I_s(t) = I_c sin(φ₀ + 2eVt/ħ) with frequency f = (2e/h) V.” Assumptions: same as above; voltage is constant; junction can support time-varying supercurrent.
- Constant definitions: The Josephson constant is K_J = 2e/h (units: Hz/V), and the flux quantum is Φ₀ = h/(2e) (units: weber, Wb), the quantum of magnetic flux associated with superconductivity.
Derivation sketch: Josephson relations from phase evolution
- The macroscopic superconducting wavefunctions on left (L) and right (R) banks are ψ_L = √n_L e^{iθ_L}, ψ_R = √n_R e^{iθ_R}. The phase difference is φ = θ_L − θ_R.
- For a weak link with tunnelling amplitude, time-dependent tunnelling theory (two-state model) gives coupled equations whose solutions imply: I_s = I_c sin φ and ħ dφ/dt = 2e V. Key physical reason: gauge invariance ties time-variation of phase to the electrochemical potential difference; the carrier is a Cooper pair with charge 2e, giving the factor 2e in the relation.
- Therefore, at V = 0, a DC supercurrent up to ±I_c can flow. At V ≠ 0 (constant), phase winds uniformly and supercurrent oscillates at f = (2e/h) V.
I–V characteristics and Shapiro steps
- With only DC bias: below |I| < I_c, the junction remains on a zero-voltage branch (superconducting). Above I_c, a finite average voltage appears due to phase slips and quasiparticle current.
- With microwave irradiation at frequency f_rf, the AC Josephson oscillation can lock to the external drive, producing constant-voltage plateaus (Shapiro steps) at V_n = n (h/2e) f_rf = n Φ₀ f_rf, n = 0, 1, 2, … . These steps enable quantum-accurate voltage standards.
SQUID basics
- Definition: A SQUID (Superconducting Quantum Interference Device) is a superconducting loop interrupted by one (RF SQUID) or two (DC SQUID) Josephson junctions, whose electrical response is a periodic function of the magnetic flux Φ threading the loop, with period Φ₀ = h/(2e).
- Principle: Supercurrent contributions through different paths around the loop interfere. Flux quantization in a superconducting loop constrains the sum of gauge-invariant phase drops to 2πm, forcing the total current or voltage response to be periodic in Φ with period Φ₀.
Flux quantization and phase around a loop (assumptions: multiply connected superconducting loop (ring), single-valued order parameter)
- Fluxoid quantization condition (thin-film, low field): ∮ (∇θ − (2e/ħ) A) · dl = 2π m, where A is vector potential and m is integer.
- In a loop with junctions, the phase differences across the junctions adjust so that the total phase round the loop plus enclosed flux satisfies the quantization. This gives interference in the net critical current.
DC SQUID (two junctions in parallel in a loop)
- Consider two identical junctions with critical current I_0 each, phases φ₁ and φ₂, and negligible loop inductance L (β_L ≡ 2π L I_0/Φ₀ ≪ 1). The total supercurrent is I_s = I_0 sin φ₁ + I_0 sin φ₂.
- The phase constraint from flux quantization is φ₂ − φ₁ = 2π Φ/Φ₀ (mod 2π). Let φ_m = (φ₁ + φ₂)/2 and Δφ = (φ₂ − φ₁)/2 = π Φ/Φ₀.
- Then I_s = 2 I_0 cos(Δφ) sin(φ_m). The maximum possible supercurrent (critical current of SQUID) occurs when sin(φ_m) = ±1, giving I_c,SQUID(Φ) = 2 I_0 |cos(π Φ/Φ₀)|. This is the standard result for a symmetric DC SQUID with small L.
- Under a fixed bias current slightly above the minimum of I_c, the time-averaged voltage across the SQUID becomes a periodic function of Φ with period Φ₀, enabling flux-to-voltage conversion.
RF SQUID (single junction in a loop)
- An RF SQUID is a superconducting loop interrupted by one junction, typically operated by coupling to a resonant tank circuit at radio frequency. The effective inductance changes periodically with Φ due to the junction’s nonlinear inductance, allowing indirect readout of flux. The response is periodic in Φ₀.
Junction dynamics (for context)
- The resistively shunted junction (RSJ) model assumes a nonlinear supercurrent I_c sin φ in parallel with a normal resistance R and junction capacitance C. Two key dimensionless parameters are: β_C = (2π/Φ₀) I_c R² C (Stewart–McCumber parameter, damping) and β_L = (2π/Φ₀) L I_c (SQUID screening parameter). Many first-year exams only require definitions and when β_C or β_L are small/large, not full dynamics.
What to draw for diagrams in an exam
- Josephson junction and I–V curve: Draw two superconducting banks (left/right) separated by a thin insulating barrier; label S–I–S, phase θ_L, θ_R, and voltage V. Next to it, sketch I–V: a flat zero-voltage branch up to ±I_c, then a resistive branch for |I| > I_c. Label I_c and V.
- AC Josephson and Shapiro steps: On an I–V axis, draw steps (plateaus) at voltages V_n; label V_n = n Φ₀ f_rf. Indicate applied microwave frequency f_rf.
- DC SQUID loop: Draw a superconducting loop with two identical junctions (J1, J2). Show external magnetic flux Φ threading the loop (circle with arrow). Label phases φ₁, φ₂ and indicate that φ₂ − φ₁ = 2π Φ/Φ₀. Next to it, sketch I_c,SQUID(Φ) = 2 I_0 |cos(π Φ/Φ₀)| vs Φ with period Φ₀.
Assumptions often required to state explicitly
- Temperature T ≪ T_c (superconducting state well developed).
- Negligible thermal noise/phase slips for DC Josephson relation; coherent pair tunnelling dominates.
- For the ideal DC SQUID formula, identical junctions and small loop inductance (β_L ≪ 1) so self-field effects are negligible.
- For exact voltage steps (metrology), junction synchronized to external RF; parasitic series resistance/inductance minimized.
Applications to mention briefly in essays
- Quantum-accurate voltage standard using Shapiro steps (Josephson arrays).
- Magnetometry: DC SQUIDs for ultra-small magnetic flux and field measurements; gradiometers for field gradients in NDT and geophysics; biomagnetism (MEG); readout of superconducting sensors (TES, transition-edge sensors) and qubits.
Formulas
I_s = I_c · sin φ
- I_s: supercurrent through a Josephson junction (A). I_c: critical current of the junction (A). φ: gauge-invariant phase difference (radian). Applies at zero voltage (DC Josephson effect).
dφ/dt = (2e/ħ) · V
- φ: phase difference (radian). t: time (s). e: elementary charge (C). ħ: reduced Planck constant (J·s). V: voltage across the junction (V). Applies for a junction under voltage V (AC Josephson effect).
f = (2e/h) · V = K_J · V
- f: Josephson oscillation frequency (Hz). h: Planck constant (J·s). K_J: Josephson constant ≡ 2e/h (Hz·V⁻¹). V: DC voltage (V). Use for constant V across a junction.
Φ₀ = h/(2e)
- Φ₀: flux quantum (Wb). h: Planck constant (J·s). e: elementary charge (C). Use in superconductivity for quantized flux and Josephson relations.
V_n = n · Φ₀ · f_rf
- V_n: voltage of nth Shapiro step (V). n: integer step index. Φ₀: flux quantum (Wb). f_rf: applied microwave frequency (Hz). Applies to irradiated junctions under suitable bias.
I_c,SQUID(Φ) = 2 I_0 · |cos(π Φ/Φ₀)|
- I_c,SQUID: critical current of a symmetric DC SQUID (A). I_0: critical current of each identical junction (A). Φ: applied magnetic flux through the SQUID loop (Wb). Φ₀: flux quantum (Wb). Valid when loop inductance is small (β_L ≪ 1) and junctions are identical.
β_L = (2π/Φ₀) · L · I_c
- β_L: SQUID screening parameter (dimensionless). L: loop inductance (H). I_c: relevant critical current (A). Small β_L means negligible self-induced flux.
β_C = (2π/Φ₀) · I_c · R² · C
- β_C: Stewart–McCumber parameter (dimensionless). R: junction shunt resistance (Ω). C: junction capacitance (F). Indicates damping: β_C ≪ 1 overdamped; β_C ≫ 1 underdamped RSJ dynamics.
K_J = 2e/h ≈ 4.83598 × 10^14 Hz·V⁻¹ (≈ 483.6 THz·V⁻¹)
- K_J: Josephson constant (Hz·V⁻¹). e: elementary charge (C). h: Planck constant (J·s). Useful to convert voltage to Josephson frequency.
Φ = B · A · cos θ
- Φ: magnetic flux through a loop (Wb). B: magnetic flux density (T). A: loop area (m²). θ: angle between B and the loop normal (radian). Use to relate field and flux for uniform fields.
Worked examples
Example 1: Josephson frequency at a given voltage Given: DC voltage V = 1.50 mV across a Josephson junction. Find the oscillation frequency f.
- Formula: f = (2e/h) V = K_J · V.
- Use K_J ≈ 4.83598 × 10^14 Hz·V⁻¹ (since 483.598 GHz/mV).
- Compute: f = (4.83598 × 10^14 Hz·V⁻¹) × (1.50 × 10^−3 V) = 7.25397 × 10^11 Hz. Answer: f ≈ 7.254 × 10^11 Hz (≈ 725.4 GHz).
Example 2: Shapiro step voltage for a given microwave frequency Given: A junction is irradiated with microwaves at f_rf = 10.000 GHz. Find the first three Shapiro step voltages V₁, V₂, V₃.
- Formula: V_n = n Φ₀ f_rf.
- Use Φ₀ ≈ 2.067 × 10^−15 Wb.
- Compute base step: Φ₀ f_rf = (2.067 × 10^−15 Wb) × (10.000 × 10^9 Hz) = 2.067 × 10^−5 V = 20.67 µV.
- Then: V₁ = 1 × 20.67 µV = 20.67 µV; V₂ = 2 × 20.67 µV = 41.34 µV; V₃ = 3 × 20.67 µV = 62.01 µV. Answer: V₁ ≈ 20.67 µV, V₂ ≈ 41.34 µV, V₃ ≈ 62.01 µV.
Example 3: DC SQUID critical current modulation with flux Given: A symmetric DC SQUID has I_0 = 8.0 µA for each junction. Assume negligible loop inductance (β_L ≪ 1). Find (a) the maximum and minimum SQUID critical current, and (b) I_c,SQUID at Φ = Φ₀/3.
- Formula: I_c,SQUID(Φ) = 2 I_0 |cos(π Φ/Φ₀)|.
- (a) Max occurs at Φ = m Φ₀: I_c,max = 2 I_0 |cos(0)| = 2 × 8.0 µA = 16.0 µA. Min occurs at Φ = (m + 1/2) Φ₀: I_c,min = 2 I_0 |cos(π/2)| = 0.
- (b) At Φ = Φ₀/3: I_c = 2 × 8.0 µA × |cos(π/3)| = 16.0 µA × 0.5 = 8.0 µA. Answer: (a) I_c,max = 16.0 µA, I_c,min = 0 µA; (b) I_c(Φ₀/3) = 8.0 µA.
Example 4 (short conceptual): Why is the flux periodicity Φ₀ = h/(2e) and not h/e in a SQUID? Model answer points:
- The superconducting carriers are Cooper pairs with charge 2e, not single electrons. In the gauge-invariant phase condition around a loop, the coupling to the vector potential enters with the carrier charge q, giving the factor (q/ħ) = (2e/ħ).
- Fluxoid quantization enforces phase single-valuedness in units of 2π. Combining these yields a flux periodicity of h/q = h/(2e) ≡ Φ₀ in superconductors. Therefore the DC SQUID characteristics are periodic in Φ₀, not h/e.
Common mistakes
- Mixing h and ħ: writing dφ/dt = 2eV/h (should be 2eV/ħ), or f = (2e/ħ) V (should be 2e/h).
- Unit slips: treating Φ (flux) as tesla (T) instead of weber (Wb); forgetting that flux density B is in tesla and Φ = B·A·cosθ.
- Applying I_c,SQUID(Φ) = 2 I_0 |cos(π Φ/Φ₀)| when the loop inductance is not negligible or junctions are unequal; in such cases, modulation depth is reduced and minima not at zero.
- Not stating assumptions: omitting the conditions (T ≪ T_c, negligible noise, identical junctions, β_L ≪ 1) loses marks in theory questions.
- Confusing Shapiro steps (constant voltage steps under RF irradiation) with constant current steps.
- Writing K_J in wrong units or with wrong scale (GHz/V vs Hz/V). Remember K_J ≈ 483.6 THz per volt, 483.6 GHz per millivolt, or 483.6 MHz per microvolt.
For your exam
- Short notes: Applications of Josephson effect (voltage standard); Types of SQUIDs (DC and RF) with operating principle; I–V characteristics and Shapiro steps; Flux quantization in superconductors. Include neat labeled sketches as described.
- Derivations: (i) Josephson relations I_s = I_c sin φ and dφ/dt = 2eV/ħ (qualitative tunnelling/phase-gauge argument). (ii) I_c,SQUID(Φ) = 2 I_0 |cos(π Φ/Φ₀)| for a symmetric DC SQUID with β_L ≪ 1. State assumptions and steps clearly; define variables.
- Numericals: Convert voltage to Josephson frequency; compute Shapiro step voltages for given f_rf; compute DC SQUID critical current vs flux; relate field B to flux using Φ = B A cosθ, then locate the number of periods in V–Φ characteristics.
- Diagrams: S–I–S junction with phase labels; I–V curve with I_c and Shapiro steps; DC SQUID loop with two junctions and applied flux. Label all symbols.
- For full marks: Define terms in bold, write formulas with units, state assumptions, show each calculation step with correct units, underline or bold final answers, and draw clean, labeled diagrams.
Quick check
- What is the exact expression for the Josephson oscillation frequency f when a DC voltage V is applied across a junction?
- State the flux periodicity of a DC SQUID and give the expression for its critical current vs flux for identical junctions with small inductance.
- A junction irradiated at 5.000 GHz shows Shapiro steps. What is V₁ (the first step) approximately, in microvolts? Answers: (1) f = (2e/h) V; (2) Periodicity is Φ₀ = h/(2e); I_c,SQUID(Φ) = 2 I_0 |cos(π Φ/Φ₀)|; (3) V₁ ≈ Φ₀ f = (2.067 × 10^−15 Wb)(5.000 × 10^9 Hz) ≈ 10.34 µV.
Finished this topic? Mark it so your progress, study plan and readiness keep up.
Stuck on something here?