First Year Engineering is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Star–delta transformation

Star–delta (Y–Δ) transformation: definitions, derivations, formulas, and worked DC/AC examples to simplify three-terminal resistive/impedance networks.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Star–delta (Y–Δ) transformation lets you replace a three-terminal network that is neither purely series nor purely parallel by an equivalent form that is easier to analyze. Engineers use it to reduce complex resistor networks in DC circuits and to simplify single-frequency AC impedance networks (using complex impedances) before applying Kirchhoff’s laws or network theorems.

Key ideas

  • Delta (Δ) network: Three elements connected in a closed loop between the three outer terminals A–B, B–C, and C–A. The element values are denoted as R_AB, R_BC, R_CA (or Z_AB, Z_BC, Z_CA in AC).
  • Equivalence condition: A star and a delta are equivalent at terminals A, B, C if, for every pair of terminals, the equivalent resistance (or impedance) between those terminals is the same in both networks. Equivalence must hold irrespective of the applied voltages/currents at the terminals.
  • Assumptions for Y–Δ transformations:
    • Linear, bilateral, time-invariant elements (resistors for DC; impedances for single-frequency AC).
    • No dependent sources inside the three-terminal subnetwork.
    • Only the three terminals are externally accessible (no other connections to the inner nodes).
  • When to use: Use Y–Δ (or Δ–Y) when a three-terminal part of a circuit prevents series/parallel reduction, e.g., unbalanced bridges and meshes.

Exact statements commonly expected in exams:

  • “Star–delta (Y–Δ) transformation is a method to convert a three-terminal star network to an equivalent delta network, and vice versa, such that the resistance (or impedance) between any pair of terminals remains unchanged.”

Derivation: Δ to Y (resistive case)

  1. Consider a delta with resistances R_AB, R_BC, R_CA between terminals A–B, B–C, and C–A respectively. Let the equivalent star have resistances R_A, R_B, R_C from terminals A, B, C to a common neutral N.
  2. The resistance between A and B in the star is R_A + R_B. In the delta it is the delta-edge R_AB in parallel with the series of the other two edges (R_CA + R_BC). But a simpler standard approach uses simultaneous equations for pairwise terminal resistances:
    • Between A and B: R_AB(eq) must be the same: R_A + R_B = R_AB ∥ (R_CA + R_BC).
    • Between B and C: R_B + R_C = R_BC ∥ (R_AB + R_CA).
    • Between C and A: R_C + R_A = R_CA ∥ (R_AB + R_BC).
  3. Solving these yields the well-known compact formulas:
    • R_A = (R_AB·R_CA) / (R_AB + R_BC + R_CA)
    • R_B = (R_AB·R_BC) / (R_AB + R_BC + R_CA)
    • R_C = (R_BC·R_CA) / (R_AB + R_BC + R_CA)
  4. Note the symmetry: each star leg equals the product of the two adjacent delta edges divided by the sum of all three delta edges.

Derivation: Y to Δ (resistive case)

  1. Start with a star having R_A, R_B, R_C to neutral N. Let the equivalent delta have R_AB, R_BC, R_CA.
  2. Between A and B in the star: R_A + R_B. In the delta: R_AB ∥ (R_BC + R_CA).
  3. A standard result obtained by equating pairwise terminal resistances and solving is:
    • R_AB = R_A + R_B + (R_A·R_B)/R_C
    • R_BC = R_B + R_C + (R_B·R_C)/R_A
    • R_CA = R_C + R_A + (R_C·R_A)/R_B
  4. An equivalent compact symmetric form is:
    • R_AB = (R_A·R_B + R_B·R_C + R_C·R_A) / R_C (note: denominator is the star leg opposite to the delta side AB)
    • R_BC = (R_A·R_B + R_B·R_C + R_C·R_A) / R_A
    • R_CA = (R_A·R_B + R_B·R_C + R_C·R_A) / R_B

Extension to AC impedances

  • Replace every resistance R by complex impedance Z; the same algebraic formulas hold:
    • Δ→Y: Z_A = (Z_AB·Z_CA)/(Z_AB + Z_BC + Z_CA), etc.
    • Y→Δ: Z_AB = Z_A + Z_B + (Z_A·Z_B)/Z_C, etc.
  • These hold at a single frequency where impedances are defined.

What to draw and label in an exam derivation

  • Draw two figures side by side with the same outer terminals A, B, C.
    1. Delta: a triangle with sides labeled R_AB (between A and B), R_BC (between B and C), R_CA (between C and A). Terminals A, B, C at the vertices.
    2. Star: a central node N, with three resistors R_A (A–N), R_B (B–N), R_C (C–N). Label N clearly.
  • Indicate pairwise equivalent resistances (e.g., write “Between A–B: R_A + R_B = …”) next to the drawings when deriving.

Formulas

R_A = (R_AB·R_CA) / (R_AB + R_BC + R_CA) — Star leg from A to neutral N in terms of delta edges; Ω; use for Δ→Y.

R_B = (R_AB·R_BC) / (R_AB + R_BC + R_CA) — Star leg from B; Ω; use for Δ→Y.

R_C = (R_BC·R_CA) / (R_AB + R_BC + R_CA) — Star leg from C; Ω; use for Δ→Y.

R_AB = R_A + R_B + (R_A·R_B)/R_C — Delta side between A and B from star legs; Ω; use for Y→Δ.

R_BC = R_B + R_C + (R_B·R_C)/R_A — Delta side between B and C; Ω; use for Y→Δ.

R_CA = R_C + R_A + (R_C·R_A)/R_B — Delta side between C and A; Ω; use for Y→Δ.

R_AB = (R_A·R_B + R_B·R_C + R_C·R_A)/R_C — Alternative compact Y→Δ; Ω; denominator is the star leg opposite to AB.

Z_A = (Z_AB·Z_CA) / (Z_AB + Z_BC + Z_CA) — AC Δ→Y using complex impedances; Ω (complex); single frequency.

Z_AB = Z_A + Z_B + (Z_A·Z_B)/Z_C — AC Y→Δ using complex impedances; Ω (complex); single frequency.

Worked examples

Example 1: Δ→Y to find equivalent resistance between two terminals Given: A delta network between terminals A, B, C has R_AB = 6 Ω, R_BC = 9 Ω, R_CA = 3 Ω. Find the equivalent resistance between A and B.

Steps:

  1. Convert Δ to Y.
  • Formula: R_A = (R_AB·R_CA)/(R_AB + R_BC + R_CA) Numbers: R_A = (6·3)/(6 + 9 + 3) Ω = 18/18 Ω = 1 Ω.
  • R_B = (R_AB·R_BC)/(sum) = (6·9)/18 Ω = 54/18 Ω = 3 Ω.
  • R_C = (R_BC·R_CA)/(sum) = (9·3)/18 Ω = 27/18 Ω = 1.5 Ω.
  1. In the star, the resistance between A and B is two legs in series: R_AB(eq) = R_A + R_B = 1 Ω + 3 Ω = 4 Ω.

Answer: The equivalent resistance between A and B is bold 4 Ω.

(If a 12 V source were applied across A–B, the current would be I = 12 V / 4 Ω = 3 A.)

Example 2: Simplify an unbalanced bridge using Δ→Y Given: Terminals P (left) and Q (right). Network: A–B–C form a triangle with resistors AB = 6 Ω, BC = 4 Ω, CA = 2 Ω. Node B connects to Q through 3 Ω. Node C connects to Q through 1 Ω. P is connected directly to node A. Find the equivalent resistance R_PQ.

Text diagram (describe to draw):

  • Draw nodes A (left, tied to P), B (top-right), C (bottom-left). Connect AB = 6 Ω, BC = 4 Ω, CA = 2 Ω (a delta). From B to Q (right terminal) draw a 3 Ω resistor. From C to Q draw a 1 Ω resistor. P is the same as node A.

Steps:

  1. Convert the delta ABC to a star with center N.
  • Sum S = 6 + 4 + 2 = 12 Ω.
  • R_A = (6·2)/12 = 1 Ω; R_B = (6·4)/12 = 2 Ω; R_C = (4·2)/12 = 8/12 = 2/3 Ω.
  1. Redraw: N connects to A via 1 Ω; to B via 2 Ω; to C via 2/3 Ω. The original delta edges are removed. The remaining series connections to Q are:
  • Path N → B (2 Ω) → Q (3 Ω) = 5 Ω total from N to Q via B.
  • Path N → C (2/3 Ω) → Q (1 Ω) = 1 2/3 Ω = 5/3 Ω from N to Q via C.
  1. Compute N–Q equivalent (two parallel branches):
  • R_NQ = (5 × 5/3) / (5 + 5/3) Ω = (25/3) / (20/3) Ω = 25/20 Ω = 1.25 Ω.
  1. Total between P (=A) and Q: series of A–N (1 Ω) and N–Q (1.25 Ω):
  • R_PQ = 1 Ω + 1.25 Ω = 2.25 Ω.

Answer: The equivalent resistance seen from P–Q is bold 2.25 Ω. (If 9 V were applied, current would be 9/2.25 = 4 A.)

Example 3: AC impedances — Δ→Y to find impedance between two terminals Given: A delta between terminals a, b, c has impedances Z_ab = j4 Ω (pure inductor), Z_bc = −j6 Ω (pure capacitor), Z_ca = 8 Ω (pure resistor). Find the equivalent impedance between a and b after converting to star, and the current if V_ab = 10∠0° V is applied.

Steps:

  1. Sum: S = Z_ab + Z_bc + Z_ca = j4 + (−j6) + 8 = 8 − j2 Ω.

  2. Star impedances:

  • Z_a = (Z_ab·Z_ca)/S = (j4·8)/(8 − j2) = j32/(8 − j2). Multiply by conjugate: Z_a = [j32(8 + j2)]/[(8 − j2)(8 + j2)] = (−64 + j256)/68 ≈ −0.9412 + j3.7647 Ω.
  • Z_b = (Z_ab·Z_bc)/S = (j4·(−j6))/(8 − j2) = 24/(8 − j2) = [24(8 + j2)]/68 ≈ 2.8235 + j0.7059 Ω.
  1. Impedance between a and b in the star is series of Z_a + Z_b:
  • Exact: Z_ab(eq) = (−64/68 + 192/68) + j(256/68 + 48/68) = (128/68) + j(304/68) = (32/17) + j(76/17) Ω.
  • Numeric: Z_ab(eq) ≈ 1.8823 + j4.4706 Ω.
  1. With V_ab = 10∠0° V, current I_ab = V_ab / Z_ab(eq).
  • |Z| = sqrt(1.8823² + 4.4706²) ≈ sqrt(23.529) ≈ 4.8507 Ω.
  • ∠Z = tan⁻¹(4.4706/1.8823) ≈ 67.0°.
  • |I| = 10/4.8507 ≈ 2.062 A; ∠I = 0° − 67.0° = −67.0°.

Answer: Z_ab(eq) = bold (1.8823 + j4.4706) Ω ≈ 4.851∠67.0° Ω; current I_ab ≈ bold 2.062∠−67.0° A.

Common mistakes

  • Using Δ→Y formulas for Y→Δ or vice versa. Write the correct set before substituting.
  • Dropping the units (Ω) or writing conductances by mistake. For AC, forgetting that Z is complex and trying to add magnitudes instead of complex numbers.
  • In AC examples, not using the complex conjugate when dividing by a complex number.
  • Applying the transformation to a subnetwork that is not strictly three-terminal (e.g., another connection is made to the internal node), which invalidates the equivalence.
  • Arithmetic slips in parallel combinations (e.g., not inverting when using R_eq = (R1·R2)/(R1 + R2)).

For your exam

  • Derivations: prove Δ→Y relations and Y→Δ relations; state assumptions.
  • Numericals: reduce a given network using one or more Y–Δ transformations and compute equivalent resistance or a current.
  • Short notes: “Applicability of Y–Δ in AC circuits,” “When Y–Δ helps in unbalanced bridges.”
  • Diagrams: draw and label Y and Δ forms with terminals A, B, C; show which elements correspond.
  • What a full-marks answer includes:
    • Clear labeled diagrams with A, B, C and either central node N (star) or triangle sides (delta).
    • Correct, neatly written formulas with symbols defined.
    • For derivations: start from pairwise terminal resistances, show key steps to the final relations; mention assumptions (linear, three-terminal only).
    • For numericals: step-by-step transformation, intermediate values, series/parallel combinations with formulas before numbers, units carried through, and a boxed/bold final answer.
    • For AC: use complex arithmetic properly and state the operating frequency context (single frequency assumed).

Quick check

  1. State the Δ→Y formula for R_A in terms of R_AB, R_BC, R_CA.
  2. In Y→Δ, which star resistor appears in the denominator of R_AB when using the compact symmetric form?
  3. A delta has sides 3 Ω, 6 Ω, 9 Ω. What is the star resistor connected to the terminal opposite the 6 Ω side?

Answers: 1) R_A = (R_AB·R_CA)/(R_AB + R_BC + R_CA). 2) The star leg opposite AB, i.e., R_C. 3) R at that terminal = (product of the two adjacent sides)/sum of all three = (3·9)/(3 + 6 + 9) = 27/18 = 1.5 Ω.

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?