Series RL, RC and RLC circuits
Steady-state and transient behavior of series RL, RC and RLC circuits: impedance/phasors, time constants, step responses, resonance, Q and bandwidth, with formulas and worked numericals.
Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.
Why it matters
Series RL, RC and RLC circuits appear in almost every electrical system: timing and filtering in instrumentation, motor starting and surge limiting, audio crossovers, and tuning/selectivity in communication front-ends. Understanding their transient (time-domain) and steady-state AC (frequency-domain) behavior lets you design for correct response, power factor, and resonance.
Key ideas
- Definition: An inductor (L) stores magnetic energy; voltage relates to current as v = L·di/dt. Unit: henry (H).
- Definition: A capacitor (C) stores electric energy; current relates to voltage as i = C·dv/dt. Unit: farad (F).
- Definition: Kirchhoff’s Voltage Law (KVL) states the algebraic sum of voltages around any closed loop is zero. Assumption: lumped parameters, no time-varying magnetic coupling linking the loop.
- Definition: In sinusoidal steady state, a phasor represents a sinusoid by a complex constant at angular frequency ω = 2πf. Using phasors: differentiate/integrate become multiply/divide by jω.
- Definition: Impedance (Z) is the frequency-domain ratio of phasor voltage to current, Z = V∠θ / I∠0 = R + jX, where X is reactance. Units: Ω.
- Reactances in sinusoidal steady state (phasor domain):
- Inductive reactance: X_L = ωL (opposes change in current; voltage leads current by 90° across an inductor).
- Capacitive reactance: X_C = 1/(ωC) (opposes change in voltage; current leads voltage by 90° across a capacitor).
- Definition: Power factor (pf) is cosφ where φ is the angle of impedance. For RL, φ > 0 (lagging); for RC, φ < 0 (leading). pf = P/S where P is real power (W), S is apparent power (VA).
- Definition: Time constant (τ) characterizes exponential transients.
- RL: τ = L/R (seconds). Current approaches its final value exponentially after a step.
- RC: τ = R·C (seconds). Capacitor voltage approaches its final value exponentially after a step.
- Series RL (AC, phasors): Z_RL = R + jωL. Magnitude |Z| = √(R² + (ωL)²). Phase φ = tan⁻¹(ωL/R). Same current I flows; voltage division is vector (phasor) division.
- Series RC (AC, phasors): Z_RC = R − j/(ωC). Magnitude |Z| = √(R² + (1/ωC)²). Phase φ = tan⁻¹(−1/(ωCR)) = −tan⁻¹(1/(ωCR)).
- Series RLC (AC, phasors): Z_RLC = R + j(ωL − 1/ωC). Magnitude |Z| = √[R² + (ωL − 1/ωC)²]. Phase φ = tan⁻¹[(ωL − 1/ωC)/R].
- Definition: Series resonance occurs when X_L = X_C, i.e., ω₀L = 1/ω₀C ⇒ ω₀ = 1/√(LC). At resonance, Z = R (purely resistive), current is maximum, and φ = 0.
- Definition: Quality factor (Q) for series RLC at resonance quantifies selectivity/voltage magnification: Q = ω₀L/R = 1/(ω₀CR) = (1/R)√(L/C). Large Q → narrow bandwidth, higher voltage magnification across L or C.
- Definition: Bandwidth (BW) of a series RLC is the difference between upper and lower half-power frequencies f₂ − f₁. Exact relations:
- In rad/s: Δω = ω₂ − ω₁ = R/L.
- In Hz: BW = f₂ − f₁ = R/(2πL).
- Also Q = ω₀/Δω = f₀/BW.
- Voltage magnification at resonance (series RLC): V_L(rms) = I·X_L = I·ω₀L = Q·V_source, and V_C(rms) = I·X_C = Q·V_source, though they are 180° out of phase with each other; vector sum equals source voltage, which equals I·R.
- Time-domain transients (step responses):
- RL step (apply DC V at t=0): i(t) = (V/R)(1 − e^(−t/τ)), v_L(t) = V e^(−t/τ).
- RC step (apply DC V at t=0): v_C(t) = V(1 − e^(−t/τ)), i(t) = (V/R) e^(−t/τ).
- Series RLC natural/forced response (time domain): With DC source suddenly applied/removed, the homogeneous solution satisfies L d²i/dt² + R di/dt + (1/C) i = 0. Define damping factor α = R/(2L), undamped natural frequency ω₀ = 1/√(LC). Cases:
- Underdamped (α < ω₀): i_h(t) = A e^(−αt) sin(ω_d t + θ), where ω_d = √(ω₀² − α²).
- Critically damped (α = ω₀): i_h(t) = (A + Bt) e^(−αt).
- Overdamped (α > ω₀): i_h(t) = A e^(s₁t) + B e^(s₂t) with s₁, s₂ < 0. Particular (forced) solution adds depending on source; for a DC step, steady-state current is V/R.
What to draw and label in exam diagrams:
- Phasor diagram for series RL: Draw I as reference along +x axis. Draw V_R in phase with I (along +x). Draw V_L leading I by 90° (along +y). Resultant V is vector sum tip-to-tail; label angle φ between V and I.
- Phasor diagram for series RC: Draw I as reference. V_R along +x, V_C lagging V_R by 90° (along −y). Resultant V has negative angle φ.
- Series RLC impedance plot idea: On reactance axis, show X_L increasing linearly with f, X_C decreasing hyperbolically; mark intersection at f₀ where X_L = X_C and φ = 0.
- Series RLC resonance voltage magnification: Show small R, large VL and VC arrows up/down; at resonance VL and VC are equal and opposite so their vector sum is approximately zero, and the source voltage appears across R as V_R = I·R.
- Time-domain step responses: Sketch exponential curves with time constant τ: for RC, v_C rising from 0 to V with labels at t = τ (63.2% of V), 3τ (95%), 5τ (~99.3%); for RL, i rising similarly.
Assumptions commonly used: linear, time-invariant components; ideal L (no winding resistance) and ideal C (no leakage or ESR) unless R is explicitly included; sinusoidal steady state at a single frequency for phasor analysis; initial conditions zero unless stated.
Derivations commonly asked:
- Impedance and phase for series RL/RC: From Z addition in series and definitions X_L = ωL, X_C = 1/ωC to get |Z| and φ as given above; show that current lags in RL and leads in RC by φ.
- Time constant derivation (RC): KVL: V = v_R + v_C = R·i + v_C, with i = C dv_C/dt ⇒ V = RC dv_C/dt + v_C ⇒ dv_C/dt + (1/RC) v_C = V/(RC). Solve first-order linear DE with zero initial condition to get v_C(t) = V(1 − e^(−t/RC)). Analogous steps for RL using i as the state variable.
- Series RLC resonance condition and Q, BW: Start with Z = R + j(ωL − 1/ωC). At resonance imaginary part zero ⇒ ω₀ = 1/√(LC). Show I_max = V/R. Define Q = ω₀L/R. Using half-power condition |I| = I_max/√2 ⇒ |Z| = √2 R ⇒ |ωL − 1/ωC| = R. Solving for ω₁, ω₂ yields ω₂ − ω₁ = R/L and hence BW = R/(2πL). Show Q = ω₀/Δω = f₀/BW.
Formulas
X_L = ω·L — Inductive reactance; ω in rad/s, L in H, X_L in Ω; applies in sinusoidal steady state.
X_C = 1/(ω·C) — Capacitive reactance; ω in rad/s, C in F, X_C in Ω; sinusoidal steady state.
Z_RL = R + j·ω·L — Series RL impedance; R in Ω, L in H, Z in Ω.
Z_RC = R − j/(ω·C) — Series RC impedance; R in Ω, C in F, Z in Ω.
Z_RLC = R + j(ω·L − 1/(ω·C)) — Series RLC impedance; units Ω.
|Z| = √(R² + X²) — Magnitude of impedance where X is net reactance; Ω.
φ = tan⁻¹(X/R) — Phase angle of impedance; radians or degrees; +ve for inductive, −ve for capacitive.
I = V/|Z| — Circuit current magnitude; V in V(rms), Z in Ω, I in A(rms).
P = V·I·cosφ — Real power; watts (W); rms values.
Q = V·I·sinφ — Reactive power; vars (var); rms values.
S = V·I — Apparent power; volt-amperes (VA); rms values.
τ_RL = L/R — Time constant of RL; s; for first-order step response.
τ_RC = R·C — Time constant of RC; s; for first-order step response.
i_RL(t) = (V/R)·(1 − e^(−t/τ_RL)) — RL current after DC step at t = 0; A.
v_RC(t) = V·(1 − e^(−t/τ_RC)) — RC capacitor voltage after DC step; V.
ω₀ = 1/√(L·C) — Undamped natural/resonant angular frequency; rad/s.
f₀ = 1/(2π√(L·C)) — Resonant frequency; Hz.
Q_series = ω₀·L/R = 1/(ω₀·C·R) = (1/R)·√(L/C) — Quality factor at resonance; dimensionless.
Δω = ω₂ − ω₁ = R/L — Bandwidth in rad/s (half-power points) for series RLC; exact.
BW = f₂ − f₁ = R/(2π·L) — Bandwidth in Hz; exact.
ω_d = √(ω₀² − α²) — Damped natural frequency for underdamped RLC; rad/s.
α = R/(2·L) — Damping factor for series RLC; s⁻¹.
Worked examples
- AC analysis of series RL Given: R = 20 Ω, L = 0.10 H, V_source = 230 V(rms), f = 50 Hz. Steps:
- Compute ω and X_L: ω = 2πf = 2π·50 = 314.16 rad/s; X_L = ωL = 314.16·0.10 = 31.416 Ω.
- Impedance magnitude: |Z| = √(R² + X_L²) = √(20² + 31.416²) = √(400 + 986.96) = √1386.96 = 37.25 Ω.
- Current magnitude: I = V/|Z| = 230/37.25 = 6.176 A (rms).
- Phase angle: φ = tan⁻¹(X_L/R) = tan⁻¹(31.416/20) = 57.5° (lagging).
- Power factor: pf = cosφ = 0.537 (lagging).
- Voltage drops: V_R = I·R = 6.176·20 = 123.5 V; V_L = I·X_L = 6.176·31.416 = 194.1 V.
- Check: |V| = √(V_R² + V_L²) = √(123.5² + 194.1²) = √(15252 + 37678) = √52930 ≈ 230.0 V OK.
- Power: P = V·I·cosφ = 230·6.176·0.537 = 764 W (approx); S = V·I = 1420 VA; Q = V·I·sinφ = 1420·0.843 ≈ 1197 var. Answer: I = 6.18 A(rms), φ = 57.5° lag, pf = 0.537 lag, P ≈ 764 W, V_R = 123.5 V, V_L = 194.1 V.
- RC charging transient Given: R = 100 kΩ, C = 10 µF, DC step V = 10 V applied at t = 0; find v_C at t = 0.5 s and i at the same instant. Steps:
- Time constant: τ = R·C = 100,000·10×10⁻⁶ = 1.0 s.
- Capacitor voltage: v_C(t) = V(1 − e^(−t/τ)) = 10[1 − e^(−0.5/1)] = 10(1 − e^(−0.5)).
- Evaluate e^(−0.5) ≈ 0.60653; so v_C(0.5 s) = 10(1 − 0.60653) = 3.9347 V.
- Current: i(t) = (V/R) e^(−t/τ) = (10/100,000) e^(−0.5) = 0.0001·0.60653 = 6.0653×10⁻⁵ A = 0.0607 mA. Answer: v_C(0.5 s) = 3.935 V, i(0.5 s) = 0.0607 mA.
- Series RLC resonance, Q and bandwidth Given: R = 10 Ω, L = 50 mH, C = 100 µF, source V = 100 V(rms). Find f₀, Q, BW, and current at resonance; also VL and VC at resonance. Steps:
- Resonant frequency: f₀ = 1/(2π√(LC)) with L = 0.05 H, C = 100×10⁻⁶ F.
- LC = 0.05 × 100×10⁻⁶ = 5×10⁻⁶.
- √(LC) = √(5×10⁻⁶) = 0.0022361.
- f₀ = 1/(2π·0.0022361) = 1/0.014047 = 71.2 Hz.
- Quality factor: Q = ω₀L/R = (2π·71.2·0.05)/10.
- ω₀ = 2π·71.2 = 447.7 rad/s.
- ω₀L = 447.7·0.05 = 22.385; Q = 22.385/10 = 2.2385 ≈ 2.236 (rounding consistent with √5/1 ≈ 2.236).
- Bandwidth: BW = f₂ − f₁ = R/(2πL) = 10/(2π·0.05) = 10/0.31416 = 31.83 Hz.
- Current at resonance: I = V/R = 100/10 = 10 A(rms).
- Voltage across L and C at resonance: V_L = I·X_L = I·ω₀L = 10·22.385 = 223.9 V; V_C = I·X_C = V_L (equal magnitude); also V_L = Q·V ≈ 2.236·100 = 223.6 V (agreement within rounding). Answer: f₀ ≈ 71.2 Hz, Q ≈ 2.24, BW ≈ 31.8 Hz, I_res = 10 A, V_L ≈ V_C ≈ 224 V(rms) (180° apart).
Common mistakes
- Writing X_C = −1/(ωC) numerically; the magnitude is 1/(ωC). The sign is represented by −j/(ωC) in impedance; do not assign a negative scalar resistance.
- Confusing lead/lag: in inductive circuits, current lags voltage; in capacitive circuits, current leads voltage.
- Using R + X instead of √(R² + X²) for |Z|; magnitude requires Pythagoras.
- Time constants: using τ = L·R or τ = 1/(RC); correct are τ_RL = L/R and τ_RC = R·C.
- Resonance mix-up: resonance condition is ω₀ = 1/√(LC), not 1/(LC) or √(L/C).
- Bandwidth formula units: BW in Hz is R/(2πL). Forgetting 2π gives rad/s result unintentionally.
- Ignoring component tolerances and internal resistance of inductors/capacitors if a question assumes ideal parts; state assumptions if needed.
For your exam
- Derivations: RC (or RL) step response using KVL and first-order DE; series RLC resonance condition and proof that BW = R/(2πL); relation Q = f₀/BW.
- Numericals: compute current, voltage drops, power factor in RL/RC; find f₀, Q, BW and currents/voltages at resonance in RLC; compute transient values at a given time using τ.
- Diagrams: neat phasor diagrams with correct orientation and labeled angles; exponential transient sketches labeling τ and percentage values (63.2%, 95%, 99.3%).
- Full-marks answers include: clear known data with units; formula first, then substitution with units through steps; correct vector (phasor) handling; final numeric answers highlighted or boxed; brief concluding statement (e.g., “lagging pf”).
Quick check
- A 50 Hz series RL has R = 10 Ω and L = 80 mH. What is X_L, |Z|, and the power factor?
- For R = 47 kΩ and C = 2.2 µF, what is τ and v_C at t = τ after a 5 V step?
- A series RLC has R = 5 Ω, L = 20 mH, C = 50 µF. Find f₀ and BW. Answers: 1) X_L = 2π·50·0.08 = 25.13 Ω; |Z| = √(10² + 25.13²) = 27.03 Ω; pf = cosφ = 10/27.03 = 0.370 (lagging). 2) τ = 47,000·2.2×10⁻⁶ = 0.1034 s; v_C(τ) = 5(1 − e⁻¹) = 5·0.632 = 3.16 V. 3) f₀ = 1/[2π√(0.02·50×10⁻⁶)] = 1/(2π·0.001) ≈ 159.15 Hz; BW = R/(2πL) = 5/(2π·0.02) = 39.79 Hz.
Finished this topic? Mark it so your progress, study plan and readiness keep up.
Stuck on something here?