First Year Engineering is coming soon
We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.
First Year Engineering
Basic Electrical Engineering
DC and AC circuits, magnetism, three-phase, transformers, machines.
Your progress in this subject0 of 16 · 0%
- 1Electrical quantities and Ohm's lawDefines charge, current, voltage/EMF, resistance/conductance, resistivity/conductivity, power and energy; states and derives Ohm’s law (macroscopic and microscopic), R = ρ·L/A, and applies them with series/parallel ideas to typical circuits.
- 2Kirchhoff's lawsKirchhoff’s Current Law (KCL) and Kirchhoff’s Voltage Law (KVL), with node/mesh concepts, assumptions, derivations, formulas, and solved circuits using nodal and mesh analysis.
- 3Network theorems: superposition and TheveninNetwork theorems: superposition and Thevenin — statements, assumptions, procedures, formulas, and worked DC/AC examples for first-year exams.
- 4Star–delta transformationStar–delta (Y–Δ) transformation: definitions, derivations, formulas, and worked DC/AC examples to simplify three-terminal resistive/impedance networks.
- 5Electromagnetism and magnetic circuitsElectromagnetism and magnetic circuits: fields (B, H, flux), materials and B–H, MMF/reluctance/flux, Ampere’s law, magnetic circuit analogies, air gap effects, inductance and energy, force and torque; with formulas and numericals.
- 6Electromagnetic inductionElectromagnetic induction: Faraday’s and Lenz’s laws, motional vs transformer EMF, self and mutual inductance, energy in magnetic fields, with formulas, derivations, and applications to generators and transformers.
- 7Capacitors and charging transientsCapacitors: definition, series/parallel combination, dielectric basics, RC step response and time constant, charging/discharging transients, energy, and exam-style derivations and numericals.
- 8AC fundamentals: RMS and average values, phasorsAC fundamentals: measuring RMS and average values of periodic waveforms and using phasors to represent and add sinusoids of the same frequency.
- 9Series RL, RC and RLC circuitsSteady-state and transient behavior of series RL, RC and RLC circuits: impedance/phasors, time constants, step responses, resonance, Q and bandwidth, with formulas and worked numericals.
- 10Power and power factor in AC circuitsPower and power factor in AC circuits: active, reactive and apparent power; power triangle; instantaneous power; single- and three-phase power formulas; measurement (wattmeter, two-wattmeter method); effects of low power factor and its correction.
- 11ResonanceResonance in AC series and parallel RLC circuits: condition for resonance, quality factor, bandwidth, selectivity, half-power frequencies, and current/voltage magnification.
- 12Three-phase systems: star and deltaThree-phase systems: definitions, star (Y) and delta (Δ) connections, line–phase relationships, phasors, power in balanced systems, and typical exam numericals.
- 13Single-phase transformerSingle-phase transformer: principle, EMF equation, turns ratio, equivalent circuit, losses, efficiency and max-efficiency condition, voltage regulation, OC/SC tests, phasor diagram, worked numericals.
- 14DC machines: basicsDC machines: parts, EMF/torque equations, types (generator/motor; shunt/series/compound), speed–torque relations, losses/efficiency, armature reaction and commutation, and standard numericals.
- 15Three-phase induction motor: basicsThree-phase induction motor basics: construction, rotating magnetic field, synchronous speed, slip, rotor frequency, power flow, equivalent circuit, torque–slip characteristic, starting methods, and key formulas with examples.
- 16Electrical wiring, earthing and safetyElectrical wiring layouts, earthing systems, and safety/protection practices used in buildings and equipment.
Coming next in Basic Electrical Engineering
- Overview of the electrical power system· notes coming
- Single-phase induction motors· notes coming