Impulse and momentum
Impulse–momentum for particles: definitions, linear and angular impulse–momentum theorems, conservation results, and how to use them in short-duration force events.
Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.
Why it matters
When forces act over very short times (hits, blasts, brake taps, switching a robot gripper), accelerations are huge and displacements are tiny — Newton’s F = m·a-instant view gets awkward, but impulse–momentum makes it simple. It lets you predict immediate post-event velocities using only the time integral of force, which is exactly what many sensors and test data provide.
Key ideas
- A particle model is assumed unless stated otherwise: mass m is constant; size and rotation are neglected. For rigid bodies, see “Plane Motion of Rigid Bodies: Energy and Momentum”. For many-particle collections, see “Dynamics of Systems of Particles”.
- Define the event window [t1, t2] as short in time. During this, some forces produce large impulses (called impulsive), others are small and can be neglected to first order.
Definitions and statements
- Impulse (vector): The time integral of force over a time interval: the area under F–t curve. It changes momentum. Units: N·s = kg·m/s.
- Linear momentum (vector): p = m·v for a particle. Units: kg·m/s.
- Linear impulse–momentum theorem for a particle (exact): The change in linear momentum equals the net impulse of external forces over the interval. Assumptions: constant mass; Newton’s laws valid; forces integrable over [t1, t2].
- Statement: m·v2 − m·v1 = ∫[t1→t2] ΣF_ext dt.
- Impulsive vs non-impulsive forces: A force is impulsive over [t1, t2] if its impulse magnitude is comparable to the momentum change of interest. Weight and drag often have tiny impulse over a millisecond; impact forces are typically impulsive.
- Average force over an interval: F_avg is defined so that J = ∫F dt = F_avg·Δt. Do not confuse F_avg with peak force; real contact forces are highly peaked.
- Conservation of linear momentum (CLM): If the net external impulse over [t1, t2] is zero (or negligible compared to the system’s momentum change), then total momentum is conserved over that interval. Applies to isolated particles/systems during very short interactions (collisions/explosions). For collisions with restitution, see topic “Collisions”.
- Angular momentum of a particle about a fixed point O: H_O = r × (m·v), where r is the position vector from O to the particle. Units: N·m·s.
- Angular impulse–momentum theorem for a particle (about a fixed point O): The change in angular momentum about O equals the time integral of the external moment about O: H_O2 − H_O1 = ∫[t1→t2] ΣM_O,ext dt. Assumptions: O is fixed in an inertial frame; mass constant.
- System (many particles) linear impulse–momentum: For a system of particles with total mass M and center-of-mass (COM) velocity V_G: M·V_G2 − M·V_G1 = ∫[t1→t2] ΣF_ext dt. Internal impulses cancel in pairs by Newton’s third law (equal and opposite, hence vectorially cancel). Assumption: total mass M is constant over [t1, t2].
- System (many particles) angular impulse–momentum about O: The change in total angular momentum about O equals the external moment impulse about O: H_O2 − H_O1 = ∫[t1→t2] ΣM_O,ext dt. Valid if O is fixed in an inertial frame, or if O is the system COM (G).
- Conservation of angular momentum about O (CAM about O): If the net external moment impulse about O over [t1, t2] is zero (e.g., only forces passing through O act), then H_O is conserved across the event. Use O fixed in an inertial frame, or O = G for systems.
Derivation outlines (what’s examined)
- Linear impulse–momentum: Start with ΣF_ext = m·a = m·dv/dt. Integrate from t1 to t2: ∫ΣF_ext dt = m∫ dv = m(v2 − v1). Vector steps component-wise are identical.
- Angular impulse–momentum about fixed O: Differentiate H_O = r × m·v to get dH_O/dt = r × m·a = ΣM_O,ext (since m·a equals net external force and r × internal force pairs cancel in systems). Integrate over [t1, t2]. Using a moving origin requires extra terms; for this course level, take moments about fixed points or the COM.
Sign conventions and modeling assumptions
- Choose a right-handed coordinate system; define positive directions explicitly. Use the right-hand rule for cross products and moments.
- During very short durations (impacts), treat displacements as small and geometry approximately constant unless stated otherwise. Weight and steady contact forces often contribute negligible impulse; check by comparing J_force ≈ F·Δt with typical momentum magnitudes m·v.
- For smooth supports/walls, tangential impulse is often zero (no friction), so only the normal momentum component changes. For rough contacts, a friction impulse can appear and must satisfy |J_t| ≤ μ_s·J_n for sticking; for sliding, J_t = μ_k·J_n with direction opposing slip. Detailed impact laws (with coefficient of restitution) are in “Collisions”.
Why real devices differ from the ideal
- Real contact forces vary rapidly with time, with finite rise/fall times; representing them by an equivalent impulse J is accurate for velocity jumps but not for peak-force predictions.
- Surfaces and bodies deform; hence contact areas and force directions vary during impact. Frictional impulses can be significant if the event is not extremely short or if μ is large.
- Air drag is usually negligible in a millisecond-scale event, but not always in micro-scale, very light systems.
Standard and limiting cases
- If ΣJ_ext = 0, momentum is strictly conserved across the event.
- If only one component of impulse is nonzero (e.g., normal to a smooth wall), only that component of velocity changes.
- In the limit Δt → 0 with finite J, peak force may tend to infinity but the velocity jump remains finite; impulse methods remain valid while acceleration becomes a distribution (mathematically).
Formulas
J = ∫[t1→t2] F dt
- J: impulse vector (N·s = kg·m/s); F: force vector (N); applies for any time-varying force over [t1, t2].
m·v₂ − m·v₁ = ΣJ_ext
- m: particle mass (kg); v₁, v₂: velocities at t1, t2 (m/s); ΣJ_ext: vector sum of external impulses over [t1, t2] (N·s); particle with constant mass.
v₂ = v₁ + (1/m)·ΣJ_ext
- Same symbols/units; direct update for velocity jump when impulse is known; particle model.
ΣJ_ext = F_avg·Δt
- F_avg: average force over [t1, t2] (N); Δt = t2 − t1 (s); use when F is approximately constant or when only average is known.
H_O = r × (m·v)
- H_O: angular momentum about fixed point O (N·m·s); r: position vector from O to particle (m); v: particle velocity (m/s); × is the cross product; particle model.
H_O₂ − H_O₁ = ∫[t1→t2] ΣM_O,ext dt
- ΣM_O,ext: net external moment about O (N·m); integral gives angular impulse (N·m·s); O must be fixed in inertial frame (or O = G for systems).
M·V_G₂ − M·V_G₁ = ΣJ_ext
- For a system of particles: M is total mass (kg, constant over [t1, t2]); V_G is COM velocity (m/s); ΣJ_ext is net external impulse (N·s). Internal impulses cancel.
If ΣJ_ext = 0 ⇒ p_total is conserved
- p_total: total linear momentum (kg·m/s); holds for an isolated particle/system over [t1, t2].
If ∫ ΣM_O,ext dt = 0 ⇒ H_O is conserved
- Conservation of angular momentum about O when no net angular impulse acts about O over [t1, t2] (with O fixed inertially, or O = G for systems).
Worked examples
Example 1 — Direct vector impulse update Given: Particle mass m = 3.0 kg. Initial velocity v₁ = (2.0 i + 0.0 j) m/s. A constant force F = (−12 i + 5 j) N acts for Δt = 0.40 s. Find final velocity and impulse magnitude.
Steps:
- Impulse: J = F·Δt.
- J = (−12 i + 5 j) N × 0.40 s = (−4.8 i + 2.0 j) N·s.
- Velocity update: v₂ = v₁ + (1/m)·J.
- (1/m)·J = (1/3.0)·(−4.8 i + 2.0 j) = (−1.6 i + 0.6667 j) m/s.
- v₂ = (2.0 − 1.6) i + (0.0 + 0.6667) j = (0.40 i + 0.6667 j) m/s.
- Speeds and impulse magnitude (if required):
- |v₂| = sqrt(0.40² + 0.6667²) m/s = sqrt(0.16 + 0.4444) ≈ 0.7776 m/s.
- |J| = sqrt(4.8² + 2.0²) N·s = sqrt(23.04 + 4.00) = 5.200 N·s.
Answer: v₂ = (0.40 i + 0.6667 j) m/s; speed ≈ 0.778 m/s; impulse magnitude = 5.20 N·s.
Assumptions: Particle; constant mass; only the stated force acts over Δt.
Example 2 — Short-duration impact with friction impulse check (system approach) Given: A bullet of mass m_b = 0.010 kg moving horizontally at u_b = 400 m/s embeds in a wooden block of mass m_blk = 0.990 kg initially at rest on a rough horizontal table (kinetic friction coefficient μ_k = 0.20). Impact duration Δt ≈ 1.0 ms. Find the common velocity immediately after impact using momentum conservation. Then verify neglecting ground friction impulse during impact is justified.
Steps:
- Define the system: bullet + block during the very short impact. External horizontal forces during Δt are friction and air drag; vertical forces (weight, normal) do not affect horizontal momentum.
- Check impulsive vs non-impulsive forces (horizontal):
- Bullet–block interaction is internal to the chosen system and produces large equal-and-opposite impulses; it changes internal motion but not total system momentum.
- Ground friction has impulse J_f ≈ F_f·Δt ≈ μ_k·N·Δt, where N ≈ (m_b + m_blk)·g for the short interval (assuming contact doesn’t lift). Compute J_f to compare with bullet momentum.
- Compute total mass and initial total momentum (horizontal):
- M = m_b + m_blk = 0.010 + 0.990 = 1.000 kg.
- Initial system momentum p₁ = m_b·u_b + m_blk·0 = 0.010×400 = 4.00 N·s.
- Apply system linear impulse–momentum: M·V_G₂ − M·V_G₁ = ΣJ_ext. If ΣJ_ext ≈ 0 (friction impulse negligible), then M·V_G₂ = p₁.
- Therefore V₂ (common velocity immediately after, since bullet embeds) = p₁ / M = 4.00 / 1.000 = 4.00 m/s in the bullet’s direction.
- Verify friction impulse is negligible:
- Normal reaction N ≈ M·g = 1.000×9.81 = 9.81 N.
- Friction force magnitude F_f ≈ μ_k·N = 0.20×9.81 = 1.962 N.
- Friction impulse J_f ≈ F_f·Δt = 1.962×0.001 = 0.001962 N·s.
- Ratio J_f / p₁ = 0.001962 / 4.00 = 4.91×10⁻⁴ ≈ 0.049%.
- Hence friction’s contribution to momentum change during impact is negligible compared to 4.00 N·s.
Answer: Immediate post-impact common velocity = 4.00 m/s (bullet’s original direction). Friction impulse during the 1 ms impact ≈ 0.00196 N·s, which is 0.049% of the system’s initial momentum ⇒ neglect justified.
Assumptions: Short impact (1 ms); particle model for bullet and block COM; ground remains in contact; air drag negligible over Δt; friction coefficient applies if sliding occurs during the brief contact.
Common mistakes
- Using peak force × Δt instead of the time integral (area under F–t) or average force × Δt; in non-rectangular pulses this gives wrong J.
- Applying conservation of linear momentum when a significant external impulse exists (e.g., long push with friction, thrust or brake pulses not negligible).
- Mixing energy and impulse incorrectly: impulse–momentum gives velocity jump, not energy dissipation directly; inelastic impacts conserve momentum, not kinetic energy.
- Neglecting friction impulse without checking J_f magnitude relative to m·v.
- Taking angular momentum conservation about a point that is not fixed or where a nonzero net moment impulse acts.
- Sign errors in cross products and moments (r × F direction); not stating the positive directions.
- Misunderstanding internal forces: In the linear momentum equation, internal impulses cancel by Newton’s third law (equal and opposite). However, their moments about a point may not cancel, so internal forces can contribute to angular momentum balance.
For GATE ME
- Quick computations of velocity change from a given force–time graph or a tabulated F(t): integrate to get J, then v₂ = v₁ + J/m.
- Classifying forces as impulsive or not in short-duration events; estimating whether weight/friction impulses can be neglected.
- Multi-component updates in 2D: impulses given along normal/tangential directions to a surface; update corresponding velocity components; use conservation of the other component if no impulse acts there.
- System-level momentum conservation for very short collisions/explosions to find immediate post-event velocities of connected parts (no need to compute internal impulses).
- Angular impulse–momentum about a fixed point: compute H_O before/after, or compute ∫ M_O dt if the line of action and geometry are simple (e.g., forces through O ⇒ H_O conserved). For systems, take moments about a fixed inertial point or the COM.
- Practice problems where a time-varying force acts (piecewise-linear in time) and only the net impulse is required; be fluent with units (N·s) and vector arithmetic.
- Avoid overreach: if a problem needs coefficient of restitution or oblique impact laws, that belongs to “Collisions”; keep the impulse–momentum core intact.
Quick check
- A 2 kg particle initially at 3 m/s along +x receives an impulse J = (−1 i + 2 j) N·s. What is its velocity immediately after?
- State the condition for conservation of linear momentum over a short event for a system of particles.
- A particle at r = (2 i + 0 j) m receives an impulse J = (0 i + 5 j) N·s. What is the change in its angular momentum about the origin O?
Answers: (1) v₂ = v₁ + J/m = (3,0) + (−0.5,1) = (2.5 i + 1.0 j) m/s. (2) Net external impulse over the event is zero (or negligible compared to system momentum), so M·V_G is unchanged. (3) ΔH_O = r × J = (2 i) × (5 j) = 10 k N·m·s (out of plane).
Finished this topic? Mark it so your progress, study plan and readiness keep up.
Stuck on something here?