Collisions
Coefficient of restitution, momentum conservation, and energy loss govern particle collisions (central and oblique) and quick impact calculations with walls or between spheres.
Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.
Why it matters
Collisions (impacts) determine rebound speeds, directions, and energy loss in systems from ball bearings and hoppers to vehicle crash dynamics and manufacturing processes (forging, shot peening). Being able to idealize an impact and compute post-collision velocities quickly is essential for analysis, design, and interview problem-solving.
Key ideas
- Collision (impact): A very short-duration interaction between bodies that causes large impulsive forces and rapid changes in velocities. Assumption: duration is so small that non-impulsive external forces (weight, drag) have negligible impulse during the collision.
- Impulse: The time integral of force over the short impact interval. Exact statement: The impulse J of a force over time t1 to t2 is J = ∫ F dt, and equals the change in linear momentum of a body over that interval. Assumption: mass remains constant.
- Line of impact: The common normal at the point of contact at the instant of impact. For smooth (frictionless) bodies, the impulsive force acts along this line only.
- Central (head-on) impact: Line of impact coincides with the relative velocity line; in particle models, velocities are collinear before and after.
- Oblique impact: Velocities are not collinear; decompose all velocities into components normal (n) and tangential (t) to the line of impact.
- Coefficient of restitution, e: A measure of elasticity of the impact along the line of impact. Exact statement (Newton’s law of restitution): Relative speed of separation along the line of impact equals e times the relative speed of approach along the same line. Range for passive collisions: 0 ≤ e ≤ 1; e may depend on materials, temperature, and impact speed.
- Special cases: e = 1 (perfectly elastic impact; no kinetic energy loss along the normal component); e = 0 (perfectly plastic impact; bodies have the same normal component of velocity after impact).
- Conservation of linear momentum: Over the short impact duration, if the net external impulse on the system is negligible, total linear momentum of the system is conserved. For two particles, momentum is conserved along all directions where external impulses are negligible.
- In smooth (frictionless) particle impacts, the impulsive force is along the normal, so: normal components change due to internal impulse; tangential components are unchanged for each particle (no tangential impulse).
- With rough contact, there is an impulsive friction force that changes tangential components. Coulomb model in impulsive form: the tangential impulse magnitude J_t satisfies J_t ≤ μ J_n (stick if within the limit; otherwise slip with |J_t| = μ J_n and direction opposing relative tangential motion). If this level of detail is required, solve using both normal (restitution) and tangential (impulsive friction) relations; otherwise, for “smooth” impact, take J_t = 0.
- Energy in collisions: Kinetic energy is generally not conserved unless e = 1 and there is no rotational energy introduced. The loss of kinetic energy in central impact can be written in closed form (see Formulas). Energy lost is converted to deformation, heat, sound, or (if rough) to spin/thermal energy.
- Sign convention:
- Choose +n along the line of impact in a convenient direction (e.g., from body 1 to body 2 along the line of centers). Tangential direction t is perpendicular to n in the plane of motion.
- Positive velocities are along chosen positive axes; “approach” means the relative normal velocity u1n − u2n has sign such that bodies are moving towards each other (magnitude is |u1n − u2n|).
- Standard results and limiting cases:
- Head-on (1D) impact of two particles: closed-form expressions for post-impact velocities v1 and v2 in terms of masses, pre-impact velocities, and e.
- Equal masses with elastic impact (e = 1): particles exchange their normal velocities.
- One mass very large (wall approximation): the smaller body’s normal component reverses direction and is scaled by e; tangential component unchanged if the wall is smooth.
- Perfectly plastic (e = 0): common normal velocity after impact equals momentum-weighted average of initial normal velocities; kinetic energy loss is maximum for given approach speed.
- Oblique impact of smooth spheres: tangential components remain unchanged; apply 1D results to normal components only.
- Oblique impact with a smooth plane (fixed): normal component reverses sign and scales by e; tangential component unchanged. If angles with the normal are used, tan(θ_rebound) = (1/e) tan(θ_incidence).
- Vertical drop rebound test on a fixed rigid horizontal plane (neglect air resistance): e = √(h2/h1), where h1 is drop height and h2 is rebound height.
- Outline of key derivations:
- 1D two-particle impact: Two equations govern post-impact velocities along n: (i) conservation of momentum m1 u1n + m2 u2n = m1 v1n + m2 v2n (assuming no external impulse along n), and (ii) restitution (v2n − v1n) = e (u1n − u2n). Solve simultaneously to get standard expressions for v1n and v2n.
- Loss of KE in 1D: Write initial and final kinetic energies (along n), substitute v1n and v2n from the above solution, simplify to get ΔK = ½ μ (1 − e²) (u1n − u2n)², where μ is the reduced mass m1 m2/(m1 + m2).
- Real vs. ideal:
- Real contacts deform with finite duration; e often varies with speed and temperature; friction and spin may be generated; surfaces might not be perfectly smooth, so tangential impulses exist. Modeling these requires rough impact theory and, for rigid bodies, rotational dynamics (see Plane Motion of Rigid Bodies: Energy and Momentum). For most exam problems, “smooth spheres/plane,” instantaneous impact, and a constant e are assumed.
Formulas
J = ∫ F dt = m (v − u)
- J: impulse (N·s); F: force (N); t: time (s); m: mass (kg); u, v: pre- and post-impact velocities (m/s). Applies to one body over the impact duration.
(v2n − v1n) = e (u1n − u2n)
- e: coefficient of restitution (dimensionless); u1n, u2n: pre-impact normal components (m/s); v1n, v2n: post-impact normal components (m/s). Applies along the line of impact.
m1 u1n + m2 u2n = m1 v1n + m2 v2n
- m1, m2: masses (kg). Momentum conservation along n when external normal impulse is negligible.
v1n = [m1 u1n + m2 u2n − m2 e (u1n − u2n)] / (m1 + m2)
- Post-impact normal velocity of particle 1 (m/s). Assumes smooth impact, negligible external normal impulse.
v2n = [m1 u1n + m2 u2n + m1 e (u1n − u2n)] / (m1 + m2)
- Post-impact normal velocity of particle 2 (m/s). Same assumptions as above.
ΔK = (1/2) μ (1 − e²) (u1n − u2n)²
- ΔK: loss of kinetic energy (J); μ = m1 m2 / (m1 + m2) (kg). Applies to the normal component for two-particle impact; total KE loss equals this if tangential components are unchanged (smooth impact).
v_common,n = (m1 u1n + m2 u2n) / (m1 + m2)
- Common normal velocity after perfectly plastic impact (e = 0), units m/s.
v_after,n = − e v_before,n (impact with a fixed smooth plane)
- Normal component to the plane reverses and scales by e (m/s). Tangential component unchanged if the plane is smooth.
tan θ_rebound = (1/e) tan θ_incidence (angles measured with the normal to a fixed smooth plane)
- θ_incidence, θ_rebound in radians or degrees. Applies to impact on a fixed smooth plane.
e = √(h2 / h1) (vertical drop and rebound on a fixed rigid horizontal plane)
- h1: drop height (m); h2: rebound height (m). Neglect air resistance; e assumed speed-independent over these speeds.
|J_t| ≤ μ J_n (impulsive Coulomb friction limit during impact)
- J_t: tangential impulse magnitude (N·s); J_n: normal impulse magnitude (N·s); μ: coefficient of friction (dimensionless). If |J_t| < μ J_n → sticking (no slip); if |J_t| = μ J_n → slipping.
Worked examples
Example 1 (direct, 1D head-on collision) Given: Two smooth particles collide along a straight line. m1 = 2 kg with u1 = +8 m/s, m2 = 3 kg with u2 = +2 m/s. Coefficient of restitution e = 0.6. Find v1, v2 and the kinetic energy loss.
Assumptions: Smooth particles; external impulses negligible; 1D central impact.
Steps:
- Use momentum conservation and restitution formulas for 1D to get closed-form v1, v2.
- Formula:
v1 = [m1 u1 + m2 u2 − m2 e (u1 − u2)] / (m1 + m2) - Numbers: numerator = (2·8 + 3·2) − 3·0.6·(8 − 2) = (16 + 6) − 10.8 = 11.2; denominator = 5
- v1 = 11.2 / 5 = 2.24 m/s
- Formula:
- Compute v2.
- Formula:
v2 = [m1 u1 + m2 u2 + m1 e (u1 − u2)] / (m1 + m2) - Numbers: numerator = (16 + 6) + 2·0.6·6 = 22 + 7.2 = 29.2; denominator = 5
- v2 = 29.2 / 5 = 5.84 m/s
- Formula:
- Kinetic energy loss.
- Initial KE:
K_i = 0.5·m1·u1² + 0.5·m2·u2² = 0.5·2·64 + 0.5·3·4 = 64 + 6 = 70 J - Final KE:
K_f = 0.5·2·(2.24)² + 0.5·3·(5.84)² = 1·5.0176 + 1.5·34.1056 = 5.0176 + 51.1584 = 56.176 J - Loss:
ΔK = 70 − 56.176 = 13.824 J - Check with standard loss formula:
ΔK = 0.5·μ·(1 − e²)·(u1 − u2)²withμ = m1 m2 /(m1 + m2) = 1.2 kggives 13.824 J (matches).
- Initial KE:
Answer: v1 = 2.24 m/s, v2 = 5.84 m/s, and the kinetic energy loss is 13.824 J.
Example 2 (GATE-style, oblique impact of smooth spheres) Two smooth spheres A and B collide obliquely. At impact, the line of centers is horizontal (take +n to the right, +t upward). Data: mA = 4 kg, mB = 2 kg, coefficient of restitution e = 0.8. Pre-impact velocities: A has speed 6 m/s at 30° above +n (u1n = 6 cos 30°, u1t = 6 sin 30°), B has speed 4 m/s at 60° above −n (i.e., to the left and upward; u2n = −4 cos 60°, u2t = +4 sin 60°). Find post-impact velocities of A and B (magnitudes and directions) and the kinetic energy loss.
Assumptions: Smooth spheres; no tangential impulse; external impulses negligible over impact; 2D planar motion.
Given numerics: cos 30° = 0.8660, sin 30° = 0.5, cos 60° = 0.5, sin 60° ≈ 0.8660.
- u1n = 6·0.8660 = 5.196 m/s; u1t = 6·0.5 = 3.000 m/s
- u2n = −4·0.5 = −2.000 m/s; u2t = 4·0.8660 = 3.464 m/s
Steps:
- Tangential components are unchanged (smooth impact): v1t = u1t = 3.000 m/s; v2t = u2t = 3.464 m/s.
- Apply 1D impact along n using standard formulas.
v1n = [m1 u1n + m2 u2n − m2 e (u1n − u2n)] / (m1 + m2)Numerator: (4·5.196 + 2·(−2.000)) − 2·0.8·(5.196 − (−2.000)) = (20.784 − 4.000) − 1.6·7.196 = 16.784 − 11.5136 = 5.2704 Denominator: 6 → v1n = 5.2704 / 6 = 0.8784 m/sv2n = [m1 u1n + m2 u2n + m1 e (u1n − u2n)] / (m1 + m2)Numerator: 16.784 + 4·0.8·7.196 = 16.784 + 23.0272 = 39.8112 Denominator: 6 → v2n = 39.8112 / 6 = 6.6352 m/s
- Form velocity vectors and magnitudes/directions.
- Sphere A: v1 = (v1n, v1t) = (0.8784, 3.000) m/s
Speed:
|v1| = √(0.8784² + 3.000²) ≈ √(0.7716 + 9) = √9.7716 ≈ 3.126 m/sDirection above +n:θ1 = arctan(v1t / v1n) = arctan(3.000 / 0.8784) ≈ 73.5° - Sphere B: v2 = (6.6352, 3.464) m/s
Speed:
|v2| = √(6.6352² + 3.464²) ≈ √(44.0259 + 12.000) = √56.0259 ≈ 7.484 m/sDirection above +n:θ2 = arctan(3.464 / 6.6352) ≈ 27.5°
- Sphere A: v1 = (v1n, v1t) = (0.8784, 3.000) m/s
Speed:
- Kinetic energy loss.
- Initial KE:
K_i = 0.5·4·6² + 0.5·2·4² = 2·36 + 1·16 = 72 + 16 = 88 J - Final KE:
K_f = 0.5·4·|v1|² + 0.5·2·|v2|² = 2·9.7716 + 1·56.0259 ≈ 19.5432 + 56.0259 = 75.5691 J - Loss:
ΔK = 88 − 75.5691 ≈ 12.4309 J - Check with normal-only loss formula:
ΔK = 0.5·μ·(1 − e²)·(u1n − u2n)²withμ = 4·2/(4+2) = 1.3333 kg,(1 − e²) = 0.36, and(u1n − u2n) = 7.196 m/sgives ≈ 12.428 J (agreement within rounding).
- Initial KE:
Answer: A leaves with speed ≈ 3.126 m/s at ≈ 73.5° above +n; B leaves with speed ≈ 7.484 m/s at ≈ 27.5° above +n; kinetic energy loss ≈ 12.43 J.
Common mistakes
- Applying restitution to total speeds instead of the normal components (must resolve along the line of impact).
- Forgetting that for smooth impacts the tangential components are unchanged for each particle; or, conversely, wrongly assuming tangential components are unchanged when contact is rough and friction gives an impulsive effect.
- Using momentum conservation when a significant external impulse exists along that direction (e.g., collision with a moving massive support where external impulses are not negligible in a subsystem). Define the system properly.
- Sign mistakes in the restitution equation (v2n − v1n) = e (u1n − u2n). Always keep the same positive n-direction for all velocities.
- For perfectly plastic collisions, not enforcing a common normal velocity after impact.
- Assuming e is always constant and independent of speed or temperature; in real materials it can vary. In exam problems, e is usually given or assumed constant.
- Mixing up incidence/reflection angles measured from the surface vs. from the normal. Here, tan relations given use angles measured with the normal.
- Rounding too early in multi-step oblique problems; carry at least 4 significant digits until the final answer.
For GATE ME
- Quick 1D head-on impact: compute post-collision velocities for given m1, m2, u1, u2, e; identify limiting cases (e = 1, e = 0, equal masses).
- Energy questions: compute kinetic energy loss using the reduced-mass formula; reason about which collision among options loses most energy.
- Oblique impact decomposition: resolve into normal/tangential, apply 1D formulas to normal components; reconstruct magnitudes and directions.
- Impact with a smooth fixed plane or wall: update the normal component by −e factor; deduce rebound speed and angle; use tan(θ_rebound) = (1/e) tan(θ_incidence) when angles are with the normal.
- Drop/rebound test: infer e from rebound height ratio; or predict rebound height from given e.
- Occasionally: qualitative items on rough impact (whether slip or stick during impact based on μ and relative tangential speed), or on the role of external impulses and system choice. Preparation tips:
- Practise resolving vectors cleanly and writing restitution and momentum equations with a clear sign convention.
- Memorize the v1, v2 closed forms and the ΔK formula; know their special cases.
- Be comfortable switching between angle-with-normal and components for wall problems.
Quick check
- Two equal-mass smooth particles collide head-on elastically (e = 1). The first has speed u and the second is at rest. What are their speeds immediately after impact?
- A ball is dropped from height h1 = 1.80 m on a fixed rigid horizontal plane and rebounds to h2 = 1.125 m. Find e.
- A particle strikes a smooth fixed wall with speed 10 m/s at 30° to the normal. If e = 0.5, find (i) the rebound speed and (ii) the rebound angle with the normal.
Answers: 1) They exchange speeds: first comes to rest, second departs with speed u. 2) e = √(1.125/1.80) ≈ 0.791. 3) Components before: v_n = 10 cos 30° = 8.660 m/s, v_t = 10 sin 30° = 5.000 m/s; after: v_n' = 0.5·8.660 = 4.330 m/s, v_t' = 5.000 m/s; speed ≈ √(4.330² + 5.000²) ≈ 6.60 m/s, angle with normal = arctan(5.000/4.330) ≈ 49.4°.
Finished this topic? Mark it so your progress, study plan and readiness keep up.
Stuck on something here?