PAHSU TY Mechanical syllabus

PAHSU · Third Year B.Tech. Mechanical Engineering · NEP 2020

Plastic Engineering

MECHPEC-02A · Programme Elective II · Semester VI · 4 credits · ISE 30 + ESE 70

One of the Programme Elective II options.

  1. Unit 1: Plastic Materials

    6 hours

    Classification, properties, testing and additives of plastics; monomers, polymers and types of polymerisation; composite and biodegradable plastics and their applications.

    Examined in the 70-mark end-semester paper

    • Thermoplastics and thermosetting plastics
    • Plastic additives and compounding
  2. Unit 2: Processing and Welding of Plastics

    7 hours

    Injection and extrusion moulding, sheet forming, calendering and blow moulding; compression, transfer and rotational moulding of thermosets; hot-gas, hot-tool, high-frequency, laser, infrared, ultrasonic and friction welding of plastics.

    Examined in the 70-mark end-semester paper

    • Moulding processes for plastics
    • Calendering, compression, transfer and rotational moulding
    • Extrusion blow moulding: parison swell, sag and wall thickness
    • Joining of plastics
  3. Unit 3: Design of Plastic Parts

    7 hours

    Basic design features, tolerances and allowances of moulded parts; corners, undercuts, ribs and minimum wall thickness; curing time; inserts, cores and mould materials.

    Examined in the 70-mark end-semester paper

    • Design of moulded plastic parts
  4. Unit 4: Compression and Transfer Moulds

    8 hours

    Main parts of a compression mould, the standard insert mould body, loading chamber, punch, ejectors and guide pins; types, parts and automation of transfer moulds.

    Examined in the 70-mark end-semester paper

    • Compression and transfer mould design
  5. Unit 5: Injection Mould Design

    6 hours

    Single-cavity, multi-cavity, semi-automatic and automatic moulds; feed, temperature-control and ejection systems.

    Examined in the 70-mark end-semester paper

    • Injection mould design: cavities, feed and ejection
    • Injection moulding: rheology, feed system and mould filling
  6. Unit 6: Cooling of Injection Moulds

    6 hours

    Heat to be removed by cooling, natural cooling, mean mould temperature and the thermal resistance of the mould body; dimensioning a correct cooling system.

    Examined in the 70-mark end-semester paper

    • Cooling system design for injection moulds

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).