Mechanical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Mechanical Engineering (University)

Manufacturing Processes-I

Metal cutting, casting, forming, welding, grinding and fine finishing.

Interview questions
Notes for Manufacturing Processes-I are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Manufacturing Processes-I

  1. Lathe and milling operations· notes coming
  2. Chip formation and types of chips· notes coming
  3. Orthogonal and oblique cutting· notes coming
  4. Merchant's theory and cutting forces· notes coming
  5. Cutting tool materials and tool signature· notes coming
  6. Tool wear and Taylor's tool life equation· notes coming
  7. Patterns and pattern allowances· notes coming
  8. Moulding sand and cores· notes coming
  9. Gating system and mould filling time· notes coming
  10. Riser design and solidification· notes coming
  11. Casting defects and remedies· notes coming
  12. Special casting processes· notes coming
  13. Fundamentals of metal forming· notes coming
  14. Rolling and rolling load· notes coming
  15. Forging and forging load· notes coming
  16. Sheet metal operations and presses· notes coming
  17. Die design: strip layout, clearance and press capacity· notes coming
  18. Soldering, brazing and weld joints· notes coming
  19. Arc welding: MIG and TIG· notes coming
  20. Resistance welding· notes coming
  21. Gas welding and flames· notes coming
  22. Solid-state and modern welding processes· notes coming
  23. Welding defects and inspection· notes coming
  24. Grinding machines and processes· notes coming
  25. Grinding wheels: designation and selection· notes coming
  26. Honing and lapping· notes coming
  27. Advanced fine finishing processes· notes coming
  28. Classification of manufacturing processes· notes coming
  29. Adhesive bonding and mechanical fastening· notes coming
  30. Extrusion, wire and tube drawing· notes coming
  31. Drilling, shaping and broaching machines· notes coming
  32. Gear manufacturing processes· notes coming
  33. Single-point cutting tool geometry· notes coming
  34. ECM, EDM, USM and laser beam machining· notes coming
  35. Polymer moulding processes· notes coming
  36. Powder metallurgy: compaction and sintering· notes coming
  37. Intelligent manufacturing and Industry 4.0· notes coming
  38. Solidification of metals and casting fluidity· notes coming
  39. Boring, reaming and tapping· notes coming
  40. Cutting temperature and its measurement· notes coming
  41. Machinability and cutting fluids· notes coming
  42. Production of metal powders· notes coming
  43. Sheet metal materials and their properties· notes coming
  44. Mechanics of sheet metal shearing· notes coming
  45. Punch force, clearance and die sizes· notes coming
  46. Sheet metal bending and springback· notes coming
  47. Formability and forming-limit diagrams· notes coming
  48. Deep drawing and blank development· notes coming
  49. Compound, progressive and combination dies· notes coming
  50. High energy rate forming processes· notes coming
  51. Melting furnaces: cupola, crucible, arc and induction· notes coming
  52. Machining time calculations· notes coming
  53. Joining of plastics· notes coming
  54. Capstan and turret lathes· notes coming
  55. Hydroforming and hydro-mechanical forming· notes coming