Mechanical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Mechanical Engineering (University)

Manufacturing Process-II

Gear cutting, plastics and composites, modern machining, additive manufacturing, jigs and fixtures.

Interview questions
Notes for Manufacturing Process-II are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Manufacturing Process-II

  1. Multipoint cutting tools· notes coming
  2. Gear milling and indexing· notes coming
  3. Gear hobbing and gear shaping· notes coming
  4. Gear finishing: shaving and grinding· notes coming
  5. Thermoplastics and thermosetting plastics· notes coming
  6. Moulding processes for plastics· notes coming
  7. Extrusion and thermoforming of plastics· notes coming
  8. Composite materials· notes coming
  9. Composite manufacturing processes· notes coming
  10. Classification of modern machining processes· notes coming
  11. Abrasive jet, water jet and ultrasonic machining· notes coming
  12. Laser and focused ion beam machining· notes coming
  13. Electrochemical and photochemical machining· notes coming
  14. EDM and wire EDM· notes coming
  15. Additive manufacturing and its classification· notes coming
  16. Photopolymerisation: SLA and DLP· notes coming
  17. Powder bed fusion: SLS, DMLS and SLM· notes coming
  18. Material extrusion and jetting processes· notes coming
  19. Post-processing in additive manufacturing· notes coming
  20. The 3-2-1 principle and location· notes coming
  21. Clamping principles and devices· notes coming
  22. Types of jigs and drill bushes· notes coming
  23. Types of fixtures· notes coming
  24. Designing a simple jig or fixture· notes coming
  25. Mechanics of orthogonal and oblique cutting· notes coming
  26. Tool wear, tool life and machinability· notes coming
  27. Design of drills, reamers, taps and broaches· notes coming
  28. Press working equipment and die components· notes coming
  29. Strip layout and design of blanking and piercing dies· notes coming
  30. Compound and progressive dies· notes coming
  31. Bending dies, bend allowance and springback· notes coming
  32. Forming, embossing and bulging dies· notes coming
  33. Drawing dies: blank size and number of draws· notes coming
  34. Taper turning and thread cutting on the lathe· notes coming
  35. Shapers, planers and slotting machines· notes coming