Mechanical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Mechanical Engineering (University)

Processing of Polymers

Compounding and extrusion, devolatilisation and extruded products, reactive extrusion, RTD and blow moulding, thermoforming.

Interview questions
Notes for Processing of Polymers are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Processing of Polymers

  1. Plastic additives and compounding· notes coming
  2. Principles of mixing and types of mixers· notes coming
  3. Single-screw extrusion: solids conveying, melting and metering· notes coming
  4. Extrusion screw design and extruder performance· notes coming
  5. Twin-screw extruders· notes coming
  6. Polymer devolatilisation in extruders· notes coming
  7. Extrusion dies and flow through them· notes coming
  8. Extruded products: films, pipes, profiles and coatings· notes coming
  9. Flat, co-extruded and oriented films· notes coming
  10. Reactive extrusion· notes coming
  11. Residence time distribution in extruders· notes coming
  12. Extrusion blow moulding: parison swell, sag and wall thickness· notes coming
  13. Thermoforming techniques and materials· notes coming
  14. Heat transfer analysis in thermoforming· notes coming
  15. Injection moulding: rheology, feed system and mould filling· notes coming
  16. Reaction injection moulding· notes coming
  17. Calendering, compression, transfer and rotational moulding· notes coming
  18. Design of moulded plastic parts· notes coming
  19. Compression and transfer mould design· notes coming
  20. Injection mould design: cavities, feed and ejection· notes coming
  21. Cooling system design for injection moulds· notes coming