GUG · Third Year B.Tech. Mechanical Engineering · NEP 2020
Mechanical Measurement
STPCCMEC603 · Semester VI · 2 credits · IE 5 + mid-semester 5 + ESE 40
A 2-credit course: mid-semester exam 5 + internal evaluation 5 + end-semester exam 40 (2 hours), minimum 20 of the 50.
Unit 1: Measuring Systems and Static Characteristics
8 hoursPurpose, structure and elements of a measuring system; static characteristics, systematic and statistical; the generalised model of a system element; calibration and measurement error.
Examined in the 40-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Elements of measuring instruments
- Errors in measurement
- Calibration
- Statistical analysis of experimental data
Unit 2: Dynamic Characteristics
7 hoursDynamic characteristics of measuring systems; first- and second-order instruments, the transfer function, step, ramp and frequency response; dynamic errors; signals and noise in measurement (no mathematical treatment).
Examined in the 40-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Static and dynamic characteristics
- First-order system response
- Second-order system response and time-domain specifications
Unit 3: Displacement and Speed Measurement
8 hoursClassification, principle, sensing elements, construction, range and working of instruments for linear and angular displacement and for speed.
Examined in the 40-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Displacement, position and proximity sensors
- Optical encoders and sensor selection
- Velocity, acceleration and force sensors
- Speed and load measurement: tachometers and load cells
Unit 4: Strain, Force, Torque, Power and Pressure Measurement
7 hoursClassification, principle, sensing elements, construction, range and working of instruments for strain, weight, force, torque, power and pressure.
Examined in the 40-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Electrical resistance strain gauges and gauge factor
- Wheatstone bridge configurations for strain gauges
- Dynamometers: absorption and transmission
- Pressure gauges
- Pressure transducers and their response
Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.