Mechanical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Mechanical Engineering (University)

Metrology and Quality Control

Measurement and gauges, limits and fits, CMMs, quality tools, control charts, FMEA and six sigma.

Interview questions
Notes for Metrology and Quality Control are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Metrology and Quality Control

  1. Measurement standards, errors and uncertainty· notes coming
  2. Accuracy, precision and gauge R&R· notes coming
  3. Linear measuring instruments and gauges· notes coming
  4. Comparators· notes coming
  5. Limits, fits and tolerances· notes coming
  6. Geometric dimensioning and tolerancing· notes coming
  7. Coordinate measuring machines· notes coming
  8. Optical and non-contact metrology· notes coming
  9. Screw thread metrology· notes coming
  10. Gear metrology· notes coming
  11. Surface texture measurement· notes coming
  12. Quality concepts and cost of quality· notes coming
  13. Deming and Juran· notes coming
  14. Seven quality tools· notes coming
  15. Kaizen, 5S, poka-yoke and quality circles· notes coming
  16. Quality management systems and awards· notes coming
  17. Variation and statistical process control· notes coming
  18. Control charts for variables· notes coming
  19. Control charts for attributes· notes coming
  20. Process capability indices· notes coming
  21. Acceptance sampling and OC curves· notes coming
  22. FMEA and FMECA· notes coming
  23. Six sigma and DMAIC· notes coming
  24. Lean principles and lean six sigma· notes coming
  25. Digital quality and Industry 4.0· notes coming
  26. Angular measurement: sine bar and bevel protractor· notes coming
  27. Interferometry and flatness testing· notes coming
  28. Gauge design and Taylor's principle· notes coming
  29. Total quality management tools: QFD, JIT and TPM· notes coming
  30. Interchangeability and selective assembly· notes coming
  31. Sampling plans: single, double, multiple and sequential· notes coming
  32. Speed and load measurement: tachometers and load cells· notes coming