Mechanical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Mechanical Engineering (University)

Theory of Machines

Mechanisms, velocity and acceleration analysis, synthesis, gears and gear trains, cams.

Interview questions
Notes for Theory of Machines are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Theory of Machines

  1. Links, pairs and kinematic chains· notes coming
  2. Degrees of freedom and Grübler's criterion· notes coming
  3. Inversions of the four-bar chain· notes coming
  4. Inversions of slider-crank and double slider-crank chains· notes coming
  5. Equivalent linkages· notes coming
  6. Analytical analysis of the slider-crank mechanism· notes coming
  7. Velocity analysis by relative velocity· notes coming
  8. Acceleration analysis and the Coriolis component· notes coming
  9. Instantaneous centres and Kennedy's theorem· notes coming
  10. Kinematic synthesis: tasks and types· notes coming
  11. Precision positions and Chebyshev spacing· notes coming
  12. Graphical three-position synthesis· notes coming
  13. Freudenstein's equation· notes coming
  14. Gear terminology and the law of gearing· notes coming
  15. Path and arc of contact and contact ratio· notes coming
  16. Interference and minimum number of teeth· notes coming
  17. Helical, bevel and worm gears· notes coming
  18. Simple and compound gear trains· notes coming
  19. Epicyclic gear trains and holding torque· notes coming
  20. Types of cams and followers· notes coming
  21. Follower motions: SHM, uniform acceleration and cycloidal· notes coming
  22. Drawing cam profiles· notes coming
  23. Pressure angle, undercutting and jump· notes coming
  24. Hooke's joint· notes coming
  25. Graphical acceleration analysis· notes coming
  26. Displacement, velocity and acceleration diagrams of followers· notes coming
  27. Belt drives and belt tensions· notes coming
  28. Condition for maximum power transmission· notes coming
  29. Chain drives· notes coming
  30. Types of brakes· notes coming
  31. Porter and Hartnell governors· notes coming
  32. Gyroscopic couple· notes coming
  33. Gyroscopic effect on naval ships· notes coming
  34. Straight-line, Geneva and steering mechanisms· notes coming
  35. Klein's construction· notes coming
  36. Friction in screws and threads· notes coming
  37. Pivot and collar friction· notes coming
  38. Friction circle and friction in turning pairs· notes coming
  39. Boundary and film lubrication· notes coming
  40. Circular-arc and tangent cams· notes coming
  41. Balancing of rotating masses· notes coming
  42. Balancing of reciprocating masses· notes coming
  43. Balancing of multi-cylinder, V and radial engines· notes coming
  44. Partial balancing of locomotives· notes coming
  45. Turning moment diagrams and flywheels· notes coming
  46. Gyroscopic effect on vehicles· notes coming
  47. Free longitudinal and transverse vibrations· notes coming
  48. Damped free vibration· notes coming
  49. Critical speed of shafts· notes coming
  50. Torsional vibration of single and two-rotor systems· notes coming
  51. Dynamometers: absorption and transmission· notes coming
  52. Mechanical advantage and transmission angle· notes coming
  53. Dynamically equivalent systems and inertia of the connecting rod· notes coming
  54. Governor characteristics: sensitiveness, hunting and isochronism· notes coming