Mechanical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Mechanical Engineering (University)

Mechatronics

Introduction, sensors and transducers, signal conditioning and data representation, drives, microprocessor, microcontroller and PLC, control systems.

Interview questions
Notes for Mechatronics are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Mechatronics

  1. Mechatronic systems and their elements· notes coming
  2. Displacement, position and proximity sensors· notes coming
  3. Velocity, acceleration and force sensors· notes coming
  4. Pressure, temperature and level sensors· notes coming
  5. Optical encoders and sensor selection· notes coming
  6. Signal conditioning and op-amps· notes coming
  7. ADCs, DACs and interfacing· notes coming
  8. Displays, data loggers and data acquisition· notes coming
  9. DC motors and servomotors in mechatronics· notes coming
  10. Stepper motors· notes coming
  11. AC and linear motors· notes coming
  12. 8085 microprocessor architecture and instructions· notes coming
  13. 8051 microcontroller and interfacing· notes coming
  14. Programmable logic controllers· notes coming
  15. Ladder logic and function block programming· notes coming
  16. Open- and closed-loop systems and block diagrams· notes coming
  17. Modelling mechanical systems· notes coming
  18. On-off and PID controllers· notes coming
  19. Bode plots and stability· notes coming
  20. Opto-isolators, protection devices and relays· notes coming
  21. Pneumatic systems, valves and FRL units· notes coming
  22. Sequencing pneumatic cylinders: cascade and shift register· notes coming
  23. Electro-pneumatic circuits· notes coming
  24. Hydraulic cylinder design and meter-in and meter-out circuits· notes coming
  25. Digital logic, logic gates and Boolean algebra· notes coming
  26. Mechatronics in automated manufacturing and robotics· notes coming
  27. AI and fuzzy logic in mechatronics· notes coming
  28. Examples of mechatronic systems· notes coming
  29. Parallel and serial interfacing, handshaking and interrupts· notes coming
  30. Motor drives: DC, variable-frequency and stepper drivers· notes coming
  31. PLC timers, counters and internal relays· notes coming
  32. Impedance characteristics and impedance matching· notes coming
  33. Number systems and binary arithmetic· notes coming
  34. Karnaugh maps· notes coming
  35. PLC master control, jump control, shift registers and data handling· notes coming
  36. PLC control applications: pistons, motors, tanks and conveyors· notes coming
  37. Algorithms, flowcharts and program structure· notes coming
  38. C data types, variables and operators· notes coming
  39. Control statements and loops in C· notes coming
  40. Functions, arrays, strings and pointers in C· notes coming
  41. Arduino digital I/O, timing and delays· notes coming