Work–energy principle
Work–energy principle: relate work of forces to change in kinetic energy, include potential energy, conservative/nonconservative forces, springs, power, and typical exam derivations and numericals.
Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.
Why it matters
Engineers use the work–energy principle to quickly find speeds, stopping distances, spring sizes, and required motor power without solving time-dependent equations of motion. It turns complex force situations (including varying forces and friction) into simple energy balances that are often faster than Newton’s second law for exam and real-world problems.
Key ideas
- Work (W): The scalar measure of energy transfer done by a force as its point of application moves. Exact statement (constant force, straight-line displacement): Work is the product of the component of force along the displacement and the magnitude of the displacement. For general force and path: the line integral of the tangential component of force along the path.
- Kinetic energy (T): The energy a body possesses due to its motion; for a particle of mass m and speed v, T = 1/2 m v².
- Potential energy (V): The energy stored due to position in a conservative field. For gravity near Earth’s surface, V = m g h relative to a reference level; for a linear spring, V = 1/2 k x² measured from the spring’s natural length.
- Conservative force: A force whose work between two positions is path-independent and equals the decrease in potential energy: W_conservative = −ΔV.
- Nonconservative force: A force (e.g., kinetic friction) whose work depends on path and cannot be represented by potential energy; it typically dissipates mechanical energy as heat.
- Work–energy principle (for a particle): The net work done by all forces on a particle as it moves from position 1 to 2 equals the change in its kinetic energy: W_1→2(net) = T_2 − T_1.
- Conservation of mechanical energy: If only conservative forces act on a particle/system, the sum T + V remains constant along the motion: T_1 + V_1 = T_2 + V_2.
- Power (P): The rate of doing work; instantaneous power of a force F acting on a particle with velocity v is P = F · v.
Exact derivation: Work–energy principle for a particle with variable force Assumptions: Particle model, Newton’s second law holds, forces are applied at the particle, motion is along a smooth path, time is continuous, mass m is constant.
- Start with Newton’s second law along the tangent to the path: F_t = m a_t, where F_t is the tangential component of the resultant force, and a_t is tangential acceleration.
- The kinematics relation along the path s: a_t = dv/dt, and v = ds/dt.
- Multiply both sides of m a_t = F_t by ds: m (dv/dt) ds = F_t ds.
- Use ds/dt = v to write left side as m v dv: m v dv = F_t ds.
- Integrate between state 1 (speed v1 at s1) and state 2 (speed v2 at s2): ∫{v1}^{v2} m v dv = ∫{s1}^{s2} F_t ds.
- Evaluate the integrals: (1/2) m (v2² − v1²) = ∫_{path} F · dr.
- Rearranged: W_1→2(net) = T_2 − T_1.
Including potential energy and conservative forces
- If a force is conservative with potential V, then W_conservative,1→2 = −(V2 − V1). Substituting into total work: (W_conservative + W_nonconservative) = (T2 − T1) gives −(V2 − V1) + W_nc = (T2 − T1). Rearranged: T1 + V1 + W_nc = T2 + V2.
- If W_nc = 0 (no nonconservative forces), then T + V is constant (mechanical energy is conserved).
Work of common forces and sign conventions
- Gravity near Earth’s surface: Weight W⃗ = m g downward. Work over a vertical displacement Δh (positive upward): W_gravity = −m g Δh. Equivalently, V = m g h; then W_gravity = −ΔV.
- Normal reaction: Perpendicular to displacement along a smooth surface; does no work if there is no penetration (F ⟂ displacement).
- Kinetic friction: Magnitude F_f = μ_k N opposite to motion along the path; work over path length s is W_friction = −μ_k N s (negative; dissipative). For motion on an incline at angle θ, N = m g cos θ (if no other vertical forces besides weight and normal).
- Spring force (linear, obeys Hooke’s law): F_s = −k x along the spring axis, x measured from natural length (tension/compression positive by sign convention). Work from x1 to x2: W_spring = 1/2 k (x1² − x2²). Potential V_spring = 1/2 k x².
- Applied force at angle: If force F makes angle φ with displacement direction, work over straight displacement s is W = F s cos φ.
- Torque and rotation (brief link): For a rigid body rotating about a fixed axis with angular displacement θ, work by torque τ is W = ∫ τ dθ, and T_rot = 1/2 I ω². (Use only if your syllabus includes rigid body energy; otherwise focus on particles.)
What to draw (common exam diagrams)
- Work on an incline with friction: Draw a block on a straight plane at angle θ above horizontal. Show weight m g vertically down, normal N perpendicular to plane, friction F_f along plane opposite motion, applied force (if any) along the plane. Label path length s along the plane, initial and final positions 1 and 2, with heights h1 and h2.
- Spring system: Draw a horizontal rough surface, a block attached to a spring anchored to a wall. Mark x measured from spring’s natural length. Show direction of motion, friction, and indicate initial x1 and final x2.
- Variable force work: Plot F versus s (force along displacement vs. displacement). Shade the area under the curve from s1 to s2; label this area as work.
Assumptions often required by exam answers
- Particle model (rotational kinetic energy neglected unless stated).
- Smooth pulley/rope massless (if present); no energy loss unless given.
- Uniform gravitational field, g constant (take g = 9.81 m/s² unless told otherwise).
- Linear spring obeys Hooke’s law within elastic limit; no damping unless given.
Formulas
W = F·s·cosφ
- W: work (joule, J), F: force magnitude (newton, N), s: displacement magnitude (metre, m), φ: angle between F and displacement. Applies for constant force along a straight path.
W = ∫ F_t ds = ∫ F·dr
- W: work (J), F_t: tangential component of force (N), s: path coordinate (m), r: position vector (m), dr: differential displacement (m). Applies for variable force and/or curved path.
T = 1/2·m·v²
- T: kinetic energy (J), m: mass (kg), v: speed (m/s). Particle.
V_g = m·g·h
- V_g: gravitational potential energy (J), m: mass (kg), g: 9.81 m/s² (verify exam convention), h: height above reference (m). Near Earth’s surface.
V_s = 1/2·k·x²
- V_s: spring potential energy (J), k: spring stiffness (N/m), x: extension/compression from natural length (m). Linear spring.
W_spring(1→2) = 1/2·k·(x1² − x2²)
- Work done by the spring on the body as it moves from x1 to x2 (J). k: N/m, x1, x2: m. Linear spring.
W_friction = −μ_k·N·s
- W_friction: work by kinetic friction (J), μ_k: coefficient of kinetic friction (dimensionless), N: normal reaction (N), s: path length along contact (m). Constant μ_k, constant N.
W_net(1→2) = T2 − T1
- Work–energy principle for a particle. W_net: net work by all forces (J), T1, T2: kinetic energies (J).
T1 + V1 + W_nc = T2 + V2
- Energy balance including nonconservative work. W_nc: work by nonconservative forces (J). Applies when conservative forces are represented by potential V.
T + V = constant
- Conservation of mechanical energy when only conservative forces act (W_nc = 0).
P = dW/dt = F·v
- P: instantaneous power (watt, W), W: work (J), t: time (s), F: force vector (N), v: velocity vector (m/s). General.
N = m·g·cosθ and component of weight along incline = m·g·sinθ
- N: normal reaction (N), θ: incline angle (radian or degree for geometry), m: kg, g: m/s². Smooth plane without other vertical forces.
W_torque = ∫ τ dθ and T_rot = 1/2·I·ω²
- W_torque: work by torque (J), τ: torque (N·m), θ: angular displacement (rad), I: mass moment of inertia (kg·m²), ω: angular speed (rad/s). Rigid body rotation about fixed axis (only if needed by syllabus).
Worked examples
Example 1: Block sliding down a rough incline — find final speed after a given distance Given: Mass m = 10 kg; plane angle θ = 30°; coefficient of kinetic friction μ_k = 0.20; starts from rest; slides s = 5.0 m down along the plane. Take g = 9.81 m/s².
- Identify forces and work along displacement (down the plane is positive):
- Weight component along plane does positive work: W_g = m g sinθ · s.
- Friction does negative work: W_f = −μ_k N s, with N = m g cosθ.
- Normal does zero work.
Apply work–energy: W_net = T2 − T1 = 1/2 m v² − 0 (starts from rest).
Compute works using formulas before numbers:
W_g = m·g·sinθ·s = 10·9.81·sin30°·5.0 = 10·9.81·0.5·5.0 = 245.25 J.N = m·g·cosθ = 10·9.81·cos30° = 98.1·0.866025 ≈ 84.96 N.W_f = −μ_k·N·s = −0.20·84.96·5.0 ≈ −84.96 J.
Net work:
W_net = 245.25 − 84.96 = 160.29 J.Solve for v from
1/2·m·v² = W_net:
v² = 2·W_net/m = 2·160.29/10 = 32.058 m²/s².v = √32.058 ≈ 5.66 m/s.
Answer: Final speed after 5.0 m is 5.66 m/s (down the plane).
Check: If frictionless, v would be √(2 g s sinθ) = √(2·9.81·5·0.5) ≈ 7.0 m/s; friction reduces it to 5.66 m/s — reasonable.
Example 2: Spring-compression with friction — find maximum compression A 4.0 kg block slides on a horizontal rough surface (μ_k = 0.15) and compresses a spring of stiffness k = 800 N/m. The block is moving at 3.0 m/s when it first contacts the spring (x = 0 at natural length). Find the maximum compression x_max. Take g = 9.81 m/s².
At maximum compression, the block momentarily stops (v = 0). Apply energy including nonconservative work from state 1 (just touching, v1 = 3.0 m/s, x1 = 0) to state 2 (v2 = 0, x2 = x_max):
T1 + V_s1 + W_friction = T2 + V_s2.Write each term:
T1 = 1/2·m·v1² = 0.5·4.0·(3.0)² = 18.0 J.V_s1 = 0at x = 0.- Friction work from x = 0 to x = x_max:
W_friction = −μ_k·N·s = −μ_k·(m·g)·x_max = −0.15·(4.0·9.81)·x_max = −5.886·x_max J(since motion is along x and N = m g on horizontal). T2 = 0at maximum compression.V_s2 = 1/2·k·x_max² = 0.5·800·x_max² = 400·x_max² J.
Energy balance:
18.0 − 5.886·x_max = 400·x_max².Rearrange to standard quadratic:
400·x_max² + 5.886·x_max − 18.0 = 0.Solve using quadratic formula,
x = [−b ± √(b² − 4ac)]/(2a)with a = 400, b = 5.886, c = −18.0:
- Discriminant:
b² − 4ac = (5.886)² − 4·400·(−18.0) = 34.645 − (−28800) = 28834.645. - Square root:
√28834.645 ≈ 169.82. - Positive root (compression must be positive):
x_max = [−5.886 + 169.82]/(800) = 163.934/800 = 0.20492 m.
Answer: Maximum compression is 0.205 m (to three significant figures).
Check: Without friction, x_max = √(2T1/k) = √(36/800) = 0.212 m. With friction, slightly less: 0.205 m — consistent.
Example 3: Variable force along a line — speed from area under F–s curve A 2.5 kg particle moves along a straight line under a position-dependent force F(s) = (20 − 2 s) N, where s is in metres from s = 0. At s = 0, its speed is 2.0 m/s. Find its speed at s = 6.0 m.
Work from s = 0 to 6:
W = ∫_{0}^{6} F(s) ds = ∫_{0}^{6} (20 − 2 s) ds = [20 s − s²]_{0}^{6} = (120 − 36) − 0 = 84 J.Work–energy:
W = T2 − T1 = 1/2·m·(v2² − v1²).Compute T1:
T1 = 1/2·2.5·(2.0)² = 5.0 J.Solve for v2:
84 = 1/2·2.5·(v2² − 4)⇒84 = 1.25·(v2² − 4)⇒v2² − 4 = 84/1.25 = 67.2⇒v2² = 71.2.v2 = √71.2 ≈ 8.44 m/s.
Answer: Speed at s = 6.0 m is 8.44 m/s.
Note: If the integral had given negative work net, speed would decrease; here, net positive area implies speed increases.
Common mistakes
- Forgetting normal reaction does no work when no penetration occurs; wrongly adding N·s to work.
- Using energy conservation when friction or other nonconservative forces act; should use T1 + V1 + W_nc = T2 + V2, not T1 + V1 = T2 + V2.
- Using V = m g h with inconsistent reference levels between initial and final states.
- Ignoring that spring potential is 1/2 k x² measured from natural length; using extension from some other arbitrary point.
- Plugging numbers before writing the symbolic energy equation; this makes checking units and signs harder and leads to errors.
- Confusing work (J) with torque (N·m) conceptually; though units are the same, torque is not work unless there is angular displacement and we integrate τ dθ.
- Using g = 10 m/s² in numericals when the problem expects g = 9.81 m/s² (unless the exam or teacher allows 9.8 or 10).
For your exam
- Derivations: Derive work–energy principle for a particle starting from Newton’s second law; derive work done by a spring from F = −k x; show conservation of mechanical energy when only conservative forces act. Full marks require step-by-step integrals, limits, and clear mention of assumptions (particle, constant mass, uniform g).
- Numericals: Blocks on inclines with/without friction; spring–mass systems; variable force F(s) or F(x) integrals; stopping distance given braking force; power required to maintain speed up an incline with drag (if included). Full marks need free-body diagram description, clear sign convention, energy equation before substitution, units carried, and a boxed final answer with correct significant figures.
- Diagrams: Ask to draw an F–s diagram to show work as area; block on an incline with forces labeled; spring system with x from natural length. Full marks require all forces labeled with directions and relevant dimensions/angles.
- Conceptual: Identify which forces do work in a given motion; choose whether energy is conserved or nonconservative work must be included.
Quick check
- A 5 kg particle increases speed from 4 m/s to 6 m/s. What net work is done on it?
- A block of mass m moves up a smooth incline from height h1 to h2 (> h1) with no applied force. Write the relation between speeds v1 at h1 and v2 at h2 using energy conservation.
- A spring (k = 500 N/m) is compressed from x = 0.10 m to x = 0.02 m. What work does the spring do on the attached block over this motion?
Answers: 1) W = ΔT = 1/2·5·(6² − 4²) = 2.5·(36 − 16) = 50 J. 2) 1/2·m·v1² + m·g·h1 = 1/2·m·v2² + m·g·h2. 3) W = 1/2·k·(x1² − x2²) = 0.5·500·(0.10² − 0.02²) = 250·(0.0100 − 0.0004) = 250·0.0096 = 2.4 J (positive; spring releases energy).
Finished this topic? Mark it so your progress, study plan and readiness keep up.
Stuck on something here?