Moment of inertia
Moment of inertia (mass and area), parallel and perpendicular axis theorems, radius of gyration, standard formulas for common shapes, and composite/shift calculations with examples.
Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.
Why it matters
- Predict rotational response of parts like wheels, gears, rotors and arms (mass moment of inertia).
- Transfer inertias between axes (machine design, robotics) and compute composite sections (structural design).
Key ideas
- Definition: Area moment of inertia (AMOI), also called second moment of area, of a plane area about a given reference axis in its plane is the integral of the square of the perpendicular distance of each area element from that axis. Exact statement: “The area moment of inertia about the x-axis is Iₓ = ∫ y² dA, and about the y-axis is Iᵧ = ∫ x² dA.” Units: m⁴. Note: This is a geometric property used in bending (Strength of Materials), not the same as MMOI.
- Definition: Polar moment of inertia (area) about a point O (z-axis perpendicular to the plane) is J_O = ∫ r² dA, where r² = x² + y². Units: m⁴. It is used in torsion of circular shafts.
- Theorem (Perpendicular Axis, for plane areas): “For a plane area lying in the x–y plane, the polar moment of inertia about the z-axis through point O (perpendicular to the plane) equals the sum of its moments of inertia about two mutually perpendicular axes x and y through O in the plane: J_O = Iₓ + Iᵧ.” Assumptions: thin plane area; axes intersect at O and are mutually perpendicular.
- Derivation outline: At a point (x, y), r² = x² + y², so J_O = ∫ r² dA = ∫ (x² + y²) dA = ∫ x² dA + ∫ y² dA = Iᵧ + Iₓ. Diagram to draw: x and y axes in the plane, z-axis out of plane at O; show a small dA at (x, y), label x, y, r.
- Theorem (Parallel Axis): For a plane area of total area A, “The moment of inertia about any axis parallel to an axis through the centroid G is I = I_G + A d², where d is the perpendicular distance between the axes.” For mass: “I = I_G + m d².” Assumptions: same orientation of axes; centroid is correctly located.
- Derivation outline (area): For axis X–X at distance d from centroidal axis G–G: Iₓ = ∫ y² dA = ∫ (y_G + d)² dA = ∫ (y_G² + 2 d y_G + d²) dA = I_G + 2 d ∫ y_G dA + d² ∫ dA. Since ∫ y_G dA = 0 (definition of centroid), Iₓ = I_G + A d². Diagram to draw: two parallel horizontal axes, centroid G marked, offset d shown; show a strip dA at distance y_G from G–G.
- Definition: Radius of gyration about a given axis is “the distance k from the axis at which the entire area (or mass) can be assumed concentrated without changing the moment of inertia about that axis.” Formulas: k = √(I/A) for area, k = √(I/m) for mass. Units: m.
- Standard centroidal axes and symmetry: For shapes with symmetry about an axis, the centroidal axis lies on the symmetry line and the product of inertia I_xy about centroidal axes aligned with the symmetry axes is zero. Definition: I_xy = ∫ x y dA (used in advanced topics like principal axes; not used directly in basic bending formulas).
- Derivations commonly asked:
- Rectangle (b × h) about centroidal x-axis: Divide into horizontal strips of thickness dy at distance y from the centroid (origin at centroid). dA = b dy; Iₓ = ∫ y² dA = b ∫{-h/2}^{h/2} y² dy = b [y³/3]{-h/2}^{h/2} = b (2 (h/2)³ /3) = b h³ /12. Diagram: rectangle, centroid at center, x-axis through centroid parallel to base; show a strip b × dy at y.
- Triangle (base b on x-axis, height h on y-axis) about base: At a distance y above base, strip width w(y) = b (1 − y/h). dA = w dy. I_base = ∫ y² dA = ∫₀^h y² b (1 − y/h) dy = b [y³/3 − y⁴/(4 h)]₀^h = b (h³/3 − h³/4) = b h³ /12. Then, centroidal I parallel to base: I_G = I_base − A d², where A = b h/2 and d = h/3: I_G = (b h³/12) − (b h/2)(h²/9) = (b h³/12 − b h³/18) = b h³/36. Diagram: right triangle with base on x-axis, vertical y; strip at height y with width w(y).
- Circle (radius R) about a centroidal diameter (x or y): Use polar form or standard result: Iₓ = Iᵧ = (π R⁴)/4. Polar J_O = Iₓ + Iᵧ = (π R⁴)/2. Diagram: circle centered at O with x and y diameters shown.
Formulas
Iₓ = ∫ y² dA— AMOI about x-axis in plane; y (m); dA (m²); Iₓ (m⁴); use for bending about x.Iᵧ = ∫ x² dA— AMOI about y-axis; x (m); dA (m²); Iᵧ (m⁴); use for bending about y.J_O = ∫ r² dA = Iₓ + Iᵧ— Polar AMOI about point O (z-axis); r² = x² + y²; J_O (m⁴); use for torsion of circular sections; perpendicular axis theorem applies to plane areas.I = I_G + m d²— Parallel axis (mass); I about any axis; I_G about parallel centroidal axis; m (kg); d (m).I = I_G + A d²— Parallel axis (area); I about any axis; I_G about parallel centroidal axis; A (m²); d (m).k = √(I/m)— Radius of gyration for mass; k (m); I (kg·m²); m (kg).k = √(I/A)— Radius of gyration for area; k (m); I (m⁴); A (m²).Iₓ(rectangle, centroidal) = b·h³/12— b (m): width along x; h (m): depth along y; Iₓ (m⁴); axis through centroid parallel to base.Iᵧ(rectangle, centroidal) = h·b³/12— Iᵧ (m⁴); axis through centroid parallel to side.I_base(rectangle) = b·h³/3— about base side of height h; via parallel axis from centroidal.I_base(triangle) = b·h³/12— base (m), height (m); axis along base.I_centroidal‖base(triangle) = b·h³/36— centroidal axis parallel to base through centroid.I(about centroidal diameter of circle) = (π·R⁴)/4 = (π·D⁴)/64— R (m), D (m = 2R); I (m⁴); about x or y diameter.J_O(circle) = (π·R⁴)/2 = (π·D⁴)/32— polar AMOI (m⁴) about center.I(hollow circle, centroidal diameter) = (π/64)·(D_o⁴ − D_i⁴)— D_o, D_i in m; I (m⁴).I(composite area) = Σ I_part (about the same axis)— add for material present; subtract for holes; include parallel-axis shifts for each part to the common reference axis.I_end(slender rod, perpendicular to length) = (1/3)·m·L²— MMOI about end; L (m), m (kg).I_centroid(slender rod, midpoint) = (1/12)·m·L²— MMOI about centroidal axis perpendicular to length.I(disk, about central axis) = (1/2)·m·R²— MMOI of solid circular disk about axis normal to disk through center.I(thin hoop/ring, about central axis) = m·R²— MMOI when mass concentrated at radius R.
Worked examples
Example 1: Area MOI of a rectangular plate with a central circular hole Given: A rectangular plate, width b = 300 mm, height h = 400 mm, with a central circular hole of diameter D = 150 mm. Find (a) Iₓ through the centroidal horizontal axis, (b) Iᵧ through the centroidal vertical axis, and (c) Iₓ about the bottom edge (base). Use SI units.
- Convert to meters:
- b = 0.300 m, h = 0.400 m, D = 0.150 m; R = D/2 = 0.075 m.
- Areas:
- Rectangle: A_rect = b·h = 0.300 × 0.400 = 0.120 m².
- Hole (circle): A_hole = π·R² = π × 0.075² = π × 0.005625 = 0.01767146 m² (rounded to 7 significant figures).
- Net area: A_net = A_rect − A_hole = 0.120 − 0.01767146 = 0.10232854 m² (rounded to 8 significant figures; 0.1023285 m² to 7 significant figures).
- Moments of inertia about centroidal axes (hole is central, so same centroid):
- Rectangle about centroidal x-axis: Iₓ_rect = b·h³/12 = 0.300 × 0.400³ / 12 = 0.300 × 0.064 / 12 = 0.0192 / 12 = 0.0016 m⁴.
- Rectangle about centroidal y-axis: Iᵧ_rect = h·b³/12 = 0.400 × 0.300³ / 12 = 0.400 × 0.027 / 12 = 0.0108 / 12 = 0.0009 m⁴.
- Hole (circle) about centroidal diameter: Iₓ_hole = Iᵧ_hole = (π·R⁴)/4. Compute R⁴: 0.075² = 0.005625; (0.005625)² = 0.000031640625. Then Iₓ_hole = Iᵧ_hole = (π/4) × 0.000031640625 = 0.785398163 × 0.000031640625 = 0.00002485049 m⁴ (to 7 significant figures: 2.485049×10⁻⁵ m⁴).
- Net centroidal MOI (subtract the hole):
- Iₓ_centroid = Iₓ_rect − Iₓ_hole = 0.0016 − 0.00002485049 = 0.00157514951 m⁴.
- Iᵧ_centroid = Iᵧ_rect − Iᵧ_hole = 0.0009 − 0.00002485049 = 0.00087514951 m⁴.
- Shift Iₓ to the bottom edge (base) using parallel axis. Distance from centroidal x-axis to base is d = h/2 = 0.200 m. Use net area for the shift:
- Iₓ_base = Iₓ_centroid + A_net·d² = 0.00157514951 + 0.1023285 × 0.200² = 0.00157514951 + 0.1023285 × 0.040 = 0.00157514951 + 0.00409314 = 0.00566828951 m⁴.
Answer: (a) Iₓ(centroid) = 0.00157514951 m⁴; (b) Iᵧ(centroid) = 0.00087514951 m⁴; (c) Iₓ(base) = 0.00566828951 m⁴. Final answers in engineering notation: (a) 1.57515×10⁻³ m⁴; (b) 8.75150×10⁻⁴ m⁴; (c) 5.66829×10⁻³ m⁴. Keep guard digits in intermediate steps; round consistently (e.g., 6–7 significant figures) only at the end.
Example 2: MMOI of a solid disk and shift to a parallel axis Given: Solid steel disk, mass m = 10.0 kg, radius R = 0.200 m. Find (a) MMOI about its central axis normal to the disk, (b) MMOI about a parallel axis 0.50 m away.
- About the central axis (z through center): Formula I_c = (1/2)·m·R².
- I_c = 0.5 × 10.0 × (0.200)² = 5.0 × 0.040 = 0.200 kg·m².
- About a parallel axis at distance d = 0.50 m: Use parallel axis (mass) I = I_G + m d².
- I = 0.200 + 10.0 × (0.50)² = 0.200 + 10.0 × 0.25 = 0.200 + 2.50 = 2.700 kg·m².
Answer: (a) 0.200 kg·m²; (b) 2.700 kg·m². Both to 3 significant figures.
Example 3: Slender rod — MMOI about end, and radius of gyration Given: Uniform slender rod, length L = 1.20 m, mass m = 4.00 kg. Find (a) MMOI about an axis through one end, perpendicular to the rod, (b) MMOI about centroidal axis, (c) radius of gyration about the end axis.
- MMOI about end: I_end = (1/3)·m·L² = (1/3) × 4.00 × (1.20)² = (1/3) × 4.00 × 1.44 = (1/3) × 5.76 = 1.92 kg·m².
- MMOI about centroid (midpoint): I_centroid = (1/12)·m·L² = (1/12) × 4.00 × 1.44 = (4.00 × 1.44)/12 = 5.76/12 = 0.480 kg·m².
- Radius of gyration about end: k_end = √(I_end/m) = √(1.92 / 4.00) = √(0.480) = 0.6928 m (rounded to 4 significant figures).
Answer: (a) 1.92 kg·m²; (b) 0.480 kg·m²; (c) k_end = 0.693 m (3 significant figures).
How to present diagrams in exams (describe and draw):
- Show the body/area with clearly labeled dimensions.
- Mark centroid G where known. Draw reference axes with arrow directions and names (x, y, z); indicate distances d for parallel-axis shifts.
- For integration proofs, draw a typical elemental strip dA with its location variable (x or y) and thickness (dx or dy); label w(y) if width varies.
Common mistakes
- Using centroidal formulas about the wrong axis (e.g., using b·h³/12 for the base instead of the centroid; the base is b·h³/3).
- Forgetting to subtract holes or forgetting to apply parallel-axis shift to each part to the same axis before adding.
- Using diameter in a radius-based formula without converting, or vice versa. For a circle: I = (π·R⁴)/4 = (π·D⁴)/64 — do not mix R and D.
- Assuming the centroid of a composite area stays at the geometric center after removing/adding asymmetrical parts; first locate centroid, then compute MOI.
- Dropping units in intermediate steps; this hides errors and loses marks.
- Rounding too early; keep guard digits to avoid cumulative error, round only at the end.
For your exam
- Theorems: State and prove parallel-axis theorem (area or mass) and perpendicular-axis theorem (area). Show each algebraic step and explicitly use centroid property ∫ y_G dA = 0.
- Derivations: Standard derivations for I of rectangle about centroidal axis; triangle about base and then centroidal via parallel axis; circle about centroidal diameter (give final form and, if deriving, show the integral setup in polar coordinates or use perpendicular axis with polar J_O).
- Numericals: Composite areas (with cutouts or additions), shifting to non-centroidal axes; MMOI of standard bodies (rods, disks, rings) and transfers using parallel axis. Always: 1) sketch, 2) write formulas before substituting, 3) carry SI units, 4) box final answers.
- Diagrams: Clean, labeled axes, dimensions, centroid G, distances for shifts, and elemental strips for integration.
- Short notes: Radius of gyration meaning and use; difference between AMOI and MMOI; when J = Iₓ + Iᵧ applies.
Quick check
- Write the parallel-axis theorem for (a) area and (b) mass, define each symbol.
- A rectangle 200 mm × 300 mm has Iₓ(centroid) = ? Give in m⁴.
- A thin hoop of mass 2 kg and radius 0.4 m has MMOI about its central axis = ?
Answers: (1) Area: I = I_G + A d²; Mass: I = I_G + m d²; where I is MOI about any axis, I_G is MOI about parallel centroidal axis, A is area (m²), m is mass (kg), d is perpendicular distance (m). (2) Iₓ = b·h³/12 = 0.200 × 0.300³ / 12 = 0.200 × 0.027 / 12 = 0.00045 m⁴. (3) I = m·R² = 2 × 0.4² = 0.32 kg·m².
Finished this topic? Mark it so your progress, study plan and readiness keep up.
Stuck on something here?