First Year Engineering is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Equilibrium and free-body diagrams

Equilibrium conditions for particles and rigid bodies and how to draw and use free-body diagrams to solve 2D statics problems.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Understanding equilibrium and drawing correct free-body diagrams are foundational for analyzing structures and machines; they let you replace real supports with ideal reactions, write the correct equilibrium equations, and solve for forces and moments reliably on exams and in practice.

Key ideas

  • Particle: an idealized body with mass but negligible size; all external forces are assumed to act at one point.
  • Rigid body: an idealization where the distance between any two points remains constant (no deformation) under applied loads.
  • Force: an interaction that tends to change motion of a body. It has magnitude, direction and point of application. SI unit: newton (N).
  • Equilibrium: a state in which a body has zero acceleration. Exact statement: A body is in equilibrium if and only if the vector sum of all external forces and the vector sum of all external moments about any point are both zero.
    • For a particle: ∑F → = 0.
    • For a rigid body in a plane (2D): ∑Fx = 0, ∑Fy = 0, ∑Mz = 0.
    • For a rigid body in 3D: ∑Fx = 0, ∑Fy = 0, ∑Fz = 0, ∑Mx = 0, ∑My = 0, ∑Mz = 0.
  • Moment (torque): the rotational effect of a force about a point: moment vector M = r × F, or scalar magnitude in 2D M = F·d, where d is the perpendicular distance from the point to the line of action of the force. SI unit: newton–metre (N·m).
  • Couple: two equal, opposite and parallel forces separated by a distance; has a pure moment M = F·s, independent of reference point; causes rotation only.
  • Free-body diagram (FBD): a drawing of an isolated body showing all external forces and moments acting on it, with proper directions and points of application. It replaces supports and connections by their reactions.
  • Support reactions (idealized constraints):
    • Smooth surface: reaction normal to the surface (no friction).
    • Rough surface: reaction has normal and friction components (friction topic is separate; include only if given).
    • Pin (hinge) in 2D: two reaction components, Ax and Ay.
    • Roller in 2D: one reaction normal to the surface.
    • Fixed support in 2D: three reactions: Ax, Ay and a fixing moment Mz.
  • Concurrent forces: forces whose lines of action intersect at one point. For a particle or a pin-joint where forces are concurrent and no free couples act, only ∑F = 0 conditions are needed (a moment equation about the concurrency point is not independent).
  • Non-concurrent forces: lines of action do not meet at one point; need both force and moment equilibrium for rigid bodies.
  • Two-force member: a rigid body with only two forces acting on it; for equilibrium, the forces are equal, opposite and collinear. Often used in truss analysis (refer to “Analysis of trusses”).
  • Three-force member: a rigid body with exactly three forces; for equilibrium, either all three forces are concurrent or their lines of action are parallel.
  • Varignon’s theorem: The moment of a force about a point equals the sum of the moments of the force’s components about the same point. Assumes a rigid body; holds in both 2D and 3D (no coplanarity requirement).
  • Lami’s theorem: For a particle in equilibrium under three concurrent, non-collinear forces F1, F2, F3, each force is proportional to the sine of the angle between the other two: F1/sin α = F2/sin β = F3/sin γ.
  • Static determinacy: A system is statically determinate if the unknown reactions can be found using only the equilibrium equations (no compatibility or deformation equations needed). In 2D rigid-body problems, the maximum number of independent scalar equilibrium equations is three.

Common derivations (step-by-step):

  1. Equations of equilibrium for a rigid body in a plane
  • Start with Newton’s second law for a rigid body: ∑F = m·a (translation), ∑M_O = I_O·α (rotation about a fixed point O or about the mass center).
  • For equilibrium, a = 0 and α = 0. Therefore: ∑F = 0 and ∑M_O = 0.
  • Resolve ∑F into x and y components: ∑Fx = 0 and ∑Fy = 0.
  • Take moments about any point O perpendicular to the plane: ∑Mz(O) = 0.
  • These are necessary and sufficient for coplanar rigid-body equilibrium.
  1. Lami’s theorem derivation
  • Consider a particle at point P under three forces F1, F2, F3 in equilibrium. By ∑F → = 0, these three vectors can form a closed triangle when placed head-to-tail.
  • In that triangle of forces, by the law of sines: F1/sin α = F2/sin β = F3/sin γ, where α is the included angle between F2 and F3 (the angle opposite side F1 in the triangle), and so on.
  • Assumptions: forces are concurrent at a point; only three non-collinear forces; particle model (no moments).
  1. Two-force member condition
  • Let a rigid link AB be acted on only by forces at A and B. From ∑M about A = 0, the moment of the force at B must be zero; hence the line of action at B must pass through A. Similarly, the line of action at A must pass through B. For ∑F = 0, magnitudes are equal and directions are opposite and collinear.

How to draw a correct FBD (what to draw and label):

  • Step 1: Isolate the body of interest by mentally cutting it free from all connections.
  • Step 2: Draw the outline of the body (a simple box/beam/point as needed). Mark a coordinate system (x, y) with positive directions.
  • Step 3: Replace each connection by reaction forces and moments according to the support type (e.g., pin → Ax, Ay; roller → one normal reaction R; fixed → Ax, Ay, Mz). Label magnitudes (unknowns) and directions (assumed). If direction is uncertain, pick a direction; a negative solution later will indicate the true direction.
  • Step 4: Add all applied loads: point forces with arrows at the correct locations; distributed loads as w(x) with equivalent resultant if simplifying; applied couples as curved-arrow moments with magnitude.
  • Step 5: Add weights W = m·g at centroidal locations if weight is significant. For uniform prismatic members, the weight acts at the midpoint.
  • Step 6: For 2D problems, show perpendicular distances of forces from a convenient moment center (to use in ∑M equations). Label angles each force makes with the axes.
  • Step 7: Check: have you included every external load and support reaction? Remove all internal forces at cut sections unless you are analyzing that internal section.

Notes on simplifying distributed loads when allowed:

  • Replace a uniform load w (N/m) over length L by a single resultant R = w·L acting at the centroid of the loaded length (midpoint). For a linearly varying load from w1 to w2 over L, R = (w1 + w2)·L/2 acting at the centroid of the load diagram located a distance x̄ = L·(2w1 + w2)/(3(w1 + w2)) from the w1 end (special case: if w1 = 0 the resultant acts at L/3 from the larger-intensity end). Use this only when the problem permits equivalent resultant replacement.

Formulas

  • ∑Fx = 0 — Sum of x-components of forces is zero; 2D equilibrium; N.
  • ∑Fy = 0 — Sum of y-components of forces is zero; 2D equilibrium; N.
  • ∑Mz(O) = 0 — Sum of moments of all forces about point O (out of plane) is zero; 2D rigid-body equilibrium; N·m. z denotes axis perpendicular to the plane.
  • M = r × F — Vector moment about a point; r is position vector (m), F is force (N), M in N·m; general 3D.
  • M = F·d — Scalar moment in 2D; d is perpendicular distance (m) from point to line of action; N·m.
  • W = m·g — Weight; m is mass (kg), g is gravitational acceleration (≈ 9.81 m/s² near Earth’s surface); W in N.
  • F1/sin α = F2/sin β = F3/sin γ — Lami’s theorem for a particle under three concurrent, non-collinear forces; dimensionless ratio; applies only to exactly three forces in equilibrium.
  • R = w·L — Resultant of a uniform distributed load; w in N/m, L in m, R in N; acts at centroid of the loaded region.
  • R = (w1 + w2)·L/2 — Resultant of a linearly varying load from w1 to w2; w in N/m, L in m; acts at centroid of the triangular/trapezoidal load diagram. Location of the resultant measured from the w1 end: x̄ = L·(2w1 + w2)/(3(w1 + w2)) (if w1 = 0, it is at L/3 from the larger-intensity end).

Worked examples

Example 1: Particle in equilibrium with two inclined cables (use Lami’s theorem) Given: A 250 N lamp is suspended by two cables attached to a ceiling at angles of 30° and 45° to the horizontal, left and right respectively. Find tensions T1 (left cable) and T2 (right cable).

  1. Draw FBD: At the junction (particle), three forces act: T1 along the left cable up-left at 30° above horizontal; T2 along the right cable up-right at 45° above horizontal; weight W = 250 N vertically downward.
  2. Identify the angles opposite each force in the triangle of forces. The angle between T1 and T2 equals 180° − (30° + 45°) = 105°. The angle between T2 and W equals 135°. The angle between T1 and W equals 120°.
  3. Apply Lami’s theorem: T1/sin(60°) = T2/sin(45°) = W/sin(105°).
  4. Compute sin values: sin 135° = 0.7071, sin 120° = 0.8660, sin 105° = sin(75°) = 0.9659.
  5. Solve T1 = W·sin 135°/sin 105° = 250×0.7071/0.9659 ≈ 183.0 N.
  6. Solve T2 = W·sin 120°/sin 105° = 250×0.8660/0.9659 ≈ 224.4 N.

Answer: T1 ≈ 183.0 N, T2 ≈ 224.4 N (up to rounding). Final: T1 ≈ 183.0 N, T2 ≈ 224.4 N.

Check: Vertical components: 183.0·sin30° + 224.4·sin45° ≈ 91.5 + 158.6 = 250.1 N (≈ 250 N with rounding). Horizontal components balance: 183.0·cos30° ≈ 158.6 N left and 224.4·cos45° ≈ 158.6 N right.

Example 2: Simply supported beam with point loads (rigid-body equilibrium) Given: A 6 m long uniform beam is supported at A (pin) and B (roller) at its ends. The beam weighs 1.5 kN (acts at its midpoint). A 3 kN point load acts at 2 m from A. Find reactions Ax, Ay at A and By at B. Assume supports are vertical reactions only except Ax at A (no horizontal loads here).

  1. FBD: Draw the beam as a horizontal line from A (x=0) to B (x=6 m). Show supports: pin at A → Ax, Ay; roller at B → By (vertical). Applied loads: 3 kN downward at x=2 m; W = 1.5 kN downward at x=3 m.
  2. Equilibrium equations:
  • Since no horizontal loads, ∑Fx = 0 ⇒ Ax = 0.
  • Take moments about A (counterclockwise positive): ∑Mz(A) = 0 ⇒ By·6 − 3·2 − 1.5·3 = 0 kN·m.
  1. Compute By: By·6 − 6 − 4.5 = 0 ⇒ By·6 = 10.5 ⇒ By = 10.5/6 = 1.75 kN (upward).
  2. Use ∑Fy = 0: Ay + By − 3 − 1.5 = 0 ⇒ Ay + 1.75 − 4.5 = 0 ⇒ Ay = 2.75 kN (upward).

Answer: Ax = 0 kN, Ay = 2.75 kN, By = 1.75 kN.

Check: Upward reactions total 4.5 kN, equal to total downward 3 + 1.5 = 4.5 kN; moment balance satisfied by construction.

Example 3: Rigid body with an applied couple and an offset force Given: A rectangular plate is bolted at a fixed support O. A 400 N horizontal force to the right acts at point A which is 0.3 m above and 0.4 m to the right of O. An external counterclockwise couple moment of 120 N·m is also applied to the plate. Find the reaction components at O: Ox, Oy, and the fixing moment M_O for equilibrium (2D).

  1. FBD: Isolate the plate. At O (fixed), show unknown reactions Ox (x-direction), Oy (y-direction), and resisting moment M_O (about z-axis). Show the 400 N force at A (coordinates: x=0.4 m, y=0.3 m from O) pointing right. Show the applied couple moment of 120 N·m CCW.
  2. Equilibrium equations:
  • ∑Fx = 0: Ox + 400 = 0 ⇒ Ox = −400 N (i.e., 400 N to the left on the support).
  • ∑Fy = 0: Oy = 0 (no other vertical forces).
  • ∑Mz(O) = 0: M_O + (moment of 400 N about O) + 120 = 0.
  1. Compute moment of 400 N about O: Force is horizontal to the right at y = +0.3 m. Its line of action is at a perpendicular distance d = 0.3 m from O, producing a clockwise moment: M_400 = −400×0.3 = −120 N·m (clockwise negative if CCW positive).
  2. Substitute: M_O + (−120) + 120 = 0 ⇒ M_O = 0 N·m.

Answer: Ox = −400 N (meaning 400 N to the left exerted by the support on the plate), Oy = 0 N, M_O = 0 N·m.

Check: The couple and the force’s moment cancel each other; net rotation tendency is zero, so no fixing moment is needed.

Notes on signs: Clearly state the sign convention (e.g., CCW positive) before summing moments. If an assumed reaction direction is wrong, the solved value will be negative, which is acceptable and informative.

Common mistakes

  • Drawing an incomplete FBD: missing reaction components (e.g., at a pin, both Ax and Ay are present) or adding impossible reactions (e.g., a roller providing horizontal force on a smooth surface).
  • Mixing internal and external forces: after isolating the whole body, do not include internal forces between its parts.
  • Incorrect angles and components: using the wrong angle with sine/cosine in resolving forces; always mark the angle with the x-axis or along the member.
  • Taking moments about an arbitrary point without including all forces’ moment arms or using the wrong perpendicular distance.
  • Using Lami’s theorem when there are more than three forces or when forces are not concurrent; then use ∑Fx = 0, ∑Fy = 0, and ∑M = 0 instead.
  • Rounding errors leading to noticeable equilibrium imbalance; keep at least four significant figures in intermediate steps.
  • Assuming frictional forces without data, or forgetting that a “smooth” contact implies zero friction.

For your exam

  • Short notes: Steps to draw FBDs; types of supports and their reactions with neat labelled sketches; conditions of equilibrium in 2D and 3D; static determinacy.
  • Derivations: Lami’s theorem using triangle of forces; two-force member condition; deriving ∑Fx = 0, ∑Fy = 0, ∑Mz = 0 from Newton’s laws; Varignon’s theorem (if asked, show decomposition of a force into components and sum of moments).
  • Numericals: Solve for tensions in cables, reactions at supports of beams with point and distributed loads, resultant and point of action for distributed loads, bodies under a couple and forces. Include: clear FBD, pick a sign convention, write equations first (symbols), substitute numbers with units, compute systematically, highlight the final answer.
  • Diagrams: For each problem, draw the isolated body with all forces, distances, and angles. Label supports (pin, roller, fixed), show dimensions, and indicate CCW/CW directions for moments. A neat, correctly labelled FBD earns marks even before calculations.

Quick check

  1. State the conditions of equilibrium for a rigid body in a plane.
  2. When can Lami’s theorem be applied, and what is its statement?
  3. What reactions act at a pin support in 2D, and how many independent equilibrium equations do you have in 2D?

Answers: (1) ∑Fx = 0, ∑Fy = 0, ∑Mz = 0. (2) Apply only to a particle (or concurrent force system) under three non-collinear forces in equilibrium; F1/sin α = F2/sin β = F3/sin γ. (3) Two reactions: Ax and Ay; there are three independent scalar equilibrium equations in 2D (∑Fx = 0, ∑Fy = 0, ∑Mz = 0).

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?