Support reactions of beams
Support reactions of beams: types of supports, free‑body diagram, equivalent loads for UDL/UVL/couples, and solving reactions using ΣFx=0, ΣFy=0, ΣM=0 with worked examples.
Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.
Why it matters
Support reactions are the forces and moments that supports (like pins, rollers, and fixed ends) provide to keep a beam in equilibrium. Engineers need these reactions to design safe supports and foundations, and as the first step before drawing shear force and bending moment diagrams or checking stresses and deflections.
Key ideas
A uniformly distributed load (UDL) has constant intensity w (N/m) over a length L. Its equivalent single resultant is W = w·L acting at the mid-point of that loaded length.
A uniformly varying load (UVL) changes linearly from zero to w_max (or from w1 to w2) over length L. A triangular UVL’s resultant is W = (w_max·L)/2 acting at one-third of the loaded length from the higher-intensity end (two-thirds from the lower-intensity end). A trapezoidal load can be split into a rectangle (UDL) and a triangle (UVL) and handled as the sum of their resultants.
A couple moment M is a pair of equal and opposite forces separated by a distance, producing a pure moment with no net force. In planar statics, a couple’s effect is independent of where it is applied.
Supports and their reactions
- A roller support allows horizontal movement and rotation but prevents vertical movement. It provides one reaction: a single force normal to the surface (usually vertical), R_y.
- A pin (hinge) support prevents both horizontal and vertical translation but allows rotation. It provides two reaction components: R_x (horizontal) and R_y (vertical).
- A fixed (built-in) support prevents translation and rotation. It provides three reactions: R_x, R_y, and a fixing moment M.
- A link/strut provides a single axial reaction along its axis.
Free-body diagram (FBD)
- A free-body diagram is a sketch showing the body isolated from its supports and surroundings with all external loads and reaction components applied. Steps: (1) Draw the beam with a straight reference line and mark span dimensions. (2) Replace supports by their unknown reactions with assumed directions. (3) Replace distributed loads by equivalent resultants at correct centroids, but keep the distributed form if you will take moments directly. (4) Resolve inclined loads into horizontal and vertical components if supports resist them.
- For exams, draw and label: beam span with points A (left) and B (right), dimensions along the beam, arrows for loads with magnitudes and distances, reaction arrows at supports with symbols (A_x, A_y, M_A, B_y, etc.), and a small coordinate/sign convention: x to the right, y upward, counterclockwise moments positive.
Equilibrium conditions (planar)
- A body in static equilibrium in a plane must satisfy: ΣF_x = 0, ΣF_y = 0, and ΣM_O = 0 about any point O. Choose the moment center to eliminate as many unknowns as possible (e.g., take moments about a support to remove that support’s unknown force components).
- Sign convention: Rightward forces positive in ΣF_x; upward forces positive in ΣF_y; counterclockwise moments positive in ΣM. Be consistent.
Determinacy and solvability
- A beam is statically determinate if the number of independent equilibrium equations equals the number of unknown reaction components. In the plane: a roller gives 1 unknown, a pin gives 2, a fixed end gives 3. For a simply supported beam (pin + roller): unknowns are A_x, A_y, B_y → three unknowns with three equations (usually A_x = 0 if all loads are vertical).
- A beam is statically indeterminate if there are more unknowns than equilibrium equations. Extra equations come from deformation compatibility (topic: Strength of materials/Structural analysis, outside this note). Here we restrict to statically determinate cases.
Common derivations asked in exams
- Equivalent resultant of UDL: For a constant w over length L, resultant W = ∫ w dx = w·L located at centroid x̄ = L/2 from either end of the loaded segment.
- Equivalent resultant of triangular UVL: w(x) varies linearly from 0 at x = 0 to w_max at x = L. Resultant W = ∫ w(x) dx = (w_max·L)/2. Centroid x̄ = ∫ x w(x) dx / W = 2L/3 from the zero end (or L/3 from the heavy end).
- Moment of a couple: A couple of magnitude M adds ±M directly in ΣM regardless of point chosen; it adds zero to ΣF_x and ΣF_y.
Strategy to solve reaction problems
- Read the problem and identify supports and load types/locations.
- Draw FBD with clear symbols for unknown reactions.
- Replace distributed loads by equivalent single resultants at correct positions.
- Resolve inclined loads into horizontal and vertical components.
- Apply ΣF_x = 0 to solve horizontal reactions first (if any).
- Apply ΣM about a support to eliminate as many unknowns as possible and solve for one reaction.
- Apply ΣF_y = 0 to find the remaining vertical reaction(s).
- State the direction and units, and check by taking moments about the other support (optional self-check).
Formulas
ΣFy = 0— Sum of vertical force components is zero (N). Applies to planar static equilibrium.ΣM_O = 0— Sum of moments about any point O is zero (N·m). Applies to planar static equilibrium. Sign convention must be stated.W_UDL = w · L— Resultant of a uniformly distributed load: W (N), w is intensity (N/m), L is loaded length (m). Acts at the midpoint of the loaded segment.W_UVL(triangular) = (w_max · L) / 2— Resultant of a triangular UVL: W (N), w_max (N/m) at the larger-intensity end, L (m). Acts at L/3 from the larger-intensity end (or 2L/3 from the zero end).x̄_UVL_from_zero_end = 2L / 3— Location of resultant of triangular UVL from the zero-intensity end (m).W_trapezoid = (w1 + w2) · L / 2— Resultant of a linearly varying (trapezoidal) load from w1 to w2; acts at the centroid of the trapezoid (find via rectangle + triangle decomposition). w1, w2 in N/m; L in m; W in N.M_resultant_about_point = W · d— Moment of an equivalent resultant about a point: W (N) times perpendicular distance d (m), sign per convention.R_pin = √(R_x^2 + R_y^2)— Magnitude of pin reaction from its components (N), if needed for a single-value report.Couple moment contribution: ±M— A couple of magnitude M (N·m) adds directly to ΣM with sign according to its sense (CCW positive if assumed so). No contribution to ΣF.
Worked examples
Example 1: Simply supported beam with a point load and a partial UDL
- Given: A simply supported beam AB, span L = 6.0 m. Pin at A, roller at B. A point load P = 10 kN acts downward at 2.0 m from A. A UDL of intensity w = 4 kN/m acts over the right 3.0 m of the span (from x = 3.0 m to x = 6.0 m measured from A). Find reactions A_y and B_y (take upward positive), assume no horizontal loads so A_x = 0.
- FBD: Draw beam from A (x = 0) to B (x = 6 m). At A: reactions A_x (assume rightward) and A_y (upward). At B: reaction B_y (upward). Loads: 10 kN downward at x = 2 m; UDL 4 kN/m from x = 3 m to 6 m. Replace UDL by resultant W = w·L = 4·3 = 12 kN downward acting at its centroid at x = 3 + 1.5 = 4.5 m.
- Steps:
- ΣF_x = 0: A_x = 0 (no horizontal loads).
- ΣM_A = 0 (CCW positive): +B_y·6 − 10·2 − 12·4.5 = 0.
- Compute: 10·2 = 20 kN·m; 12·4.5 = 54 kN·m.
- Thus: 6·B_y = 20 + 54 = 74 → B_y = 74 / 6 = 12.333... kN = 12.333 kN.
- ΣF_y = 0: A_y + B_y − 10 − 12 = 0 → A_y = 22 − B_y = 22 − 12.333 = 9.667 kN.
- Answers: A_y = 9.667 kN upward, B_y = 12.333 kN upward, A_x = 0.
- Quick check: ΣM_B = 0: +A_y·6 − 10·(6 − 2) − 12·(6 − 4.5) = 0 → 6·9.667 − 10·4 − 12·1.5 = 58.002 − 40 − 18 = 0.002 ≈ 0 (round-off OK).
Example 2: Cantilever with point load and UDL
- Given: A cantilever beam of length L = 4.0 m, fixed at A (left), free at B (right). A point load P = 5 kN acts downward at the free end B. A UDL of intensity w = 3 kN/m acts uniformly over the entire span. Find the fixed-end reactions at A: A_y (vertical), A_x (horizontal), and the fixing moment M_A (take CCW positive).
- FBD: Draw beam from A (x = 0) to B (x = 4 m). At A: reactions A_x (assume rightward), A_y (upward), and moment M_A (counterclockwise arrow). Loads: 5 kN downward at x = 4 m; UDL 3 kN/m over 0 ≤ x ≤ 4 m with resultant W = 3·4 = 12 kN at x = 2 m.
- Steps:
- ΣF_x = 0: A_x = 0 (no horizontal loads).
- ΣF_y = 0: A_y − 5 − 12 = 0 → A_y = 17 kN upward.
- ΣM_A = 0 (CCW positive). The external loads create clockwise moments about A: 5·4 = 20 kN·m and 12·2 = 24 kN·m, total 44 kN·m clockwise (negative). Therefore M_A must be +44 kN·m to balance: M_A − 20 − 24 = 0 → M_A = 44 kN·m (counterclockwise at A).
- Answers: A_y = 17 kN upward, A_x = 0, M_A = 44 kN·m counterclockwise.
- Note: Report sign and sense clearly; your assumed positive CCW makes M_A positive (counterclockwise) here.
Example 3: Simply supported beam with an inclined point load
- Given: Simply supported beam AB, L = 6.0 m. Pin at A, roller at B. A single 8 kN load is applied at midspan (x = 3.0 m), inclined downward at 30° to the horizontal, directed to the right and downward. Find A_x, A_y, and B_y.
- FBD: At the load point, resolve into components: Horizontal component F_H = 8·cos30°; Vertical component F_V = 8·sin30°. Directions: F_H to the right; F_V downward. At A: reactions A_x (unknown), A_y (unknown). At B: B_y (upward). No other loads.
- Data: cos30° = 0.8660; sin30° = 0.5 → F_H = 8·0.8660 = 6.928 kN; F_V = 8·0.5 = 4.000 kN.
- Steps:
- ΣF_x = 0: A_x + 6.928 = 0 → A_x = −6.928 kN (acts leftward on the beam).
- ΣM_A = 0 (CCW positive): +B_y·6 − F_V·3 = 0. Note: The horizontal component at y = 0 has zero moment about A because r × F is zero (collinear along x at the same line of action level).
- B_y = (F_V·3)/6 = (4·3)/6 = 2.000 kN.
- ΣF_y = 0: A_y + B_y − 4.000 = 0 → A_y = 4.000 − 2.000 = 2.000 kN.
- Answers: A_x = 6.928 kN (acts leftward on the beam), A_y = 2.000 kN upward, B_y = 2.000 kN upward.
- Check: ΣM_B = 0: +A_y·6 − F_V·(6 − 3) = 6·2 − 4·3 = 12 − 12 = 0 (OK). Horizontal moment still zero about B for the same reason.
Optional extra note (for theory answers): A pure couple M applied anywhere on a simply supported beam will induce equal and opposite vertical reactions whose algebra must satisfy ΣM = 0 with ±M included directly. For example, with a clockwise couple M at midspan of a 6 m simply supported beam with pin at A and roller at B, ΣM_A: +B_y·6 − M = 0 → B_y = M/6, and ΣF_y = 0 → A_y = −B_y (one reaction acts downward if the couple tends to rotate the beam without net vertical force). Be explicit about the couple’s sense and sign.
Common mistakes
- Ignoring horizontal components of inclined loads, or assigning both supports horizontal reactions when the roller cannot take horizontal force.
- Assigning wrong signs to moments (not stating CCW positive, then mixing signs).
- Missing the effect of a pure couple in the moment equation (it contributes directly to ΣM, independent of position) or wrongly treating it as a force.
- Reporting reaction magnitudes without directions or units (kN vs N, and kN·m for moments).
- In cantilevers, forgetting that the fixed end must provide a fixing moment in addition to force reactions.
For your exam
- Short notes: equivalent resultant of distributed loads; location of resultant for triangular loading; effect of a couple; determinacy.
- Diagrams: neat FBDs with all loads, distances, and reaction symbols; show equivalent resultants and their positions.
- Derivations: centroid location for triangular load resultant; deriving reactions for standard cases (simply supported with UDL or point load; cantilever with end load/UDL) using ΣFx, ΣFy, ΣM.
- Numericals: compute reactions for beams with combinations of point loads, partial UDLs, UVLs, inclined loads, and couples.
- How to secure full marks:
- Start with a clean FBD, label all distances, magnitudes, and directions; write your sign convention.
- Convert distributed loads to single resultants with positions; resolve inclined loads.
- Write equilibrium equations symbolically before substituting numbers; carry SI units throughout.
- Solve step-by-step; present final answers with magnitude, direction, and units; add a quick independent check (e.g., moment about the other support) if space permits.
Quick check
- Where does the single equivalent resultant of a triangular UVL (zero at left, w_max at right over length L) act along the beam?
- A simply supported beam carries a UDL of 5 kN/m over its entire 8 m span. What are the vertical reactions at the supports?
- A 10 kN load inclined at 45° downward to the right acts at midspan of a pin–roller beam. What horizontal reaction must the pin provide?
Answers: (1) At L/3 from the right (heavy) end, i.e., 2L/3 from the left. (2) Total load is 5·8 = 40 kN at midspan; reactions are equal: 20 kN upward at each support. (3) Horizontal component is 10·cos45° = 7.071 kN to the right; the pin must provide 7.071 kN to the left (equal and opposite).
Finished this topic? Mark it so your progress, study plan and readiness keep up.
Stuck on something here?