Civil Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Projectile motion

Projectile motion: motion of a particle under gravity with no other forces; equations, range/time/height results, special cases (horizontal launch, unequal heights), and exam-style numericals.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Projectile motion helps engineers predict and control paths of objects moving through air when air resistance is negligible. Examples include launching materials on construction sites, ballistics in defense, water jets from fire hoses, and designing sports equipment and amusement rides.

Key ideas

  • Trajectory: The path traced by the projectile; we will show it is a parabola under standard assumptions.
  • Assumptions for basic projectile motion: (i) Motion in a uniform gravitational field with constant magnitude g acting vertically downward; (ii) Air resistance neglected; (iii) Earth’s rotation and curvature neglected; (iv) Motion takes place near Earth’s surface so g is constant; (v) Launch point defined with a fixed inertial reference frame.
  • Components of motion: Resolve the initial velocity into horizontal and vertical components: horizontal motion has constant velocity; vertical motion has constant acceleration −g. The motions are independent and share the same time parameter.

Exact statements and common derivations

  1. Equation of motion components (derivation)
  • Consider axes: x-axis horizontal to the right, y-axis vertically upward. Let the projectile be launched from position (x0, y0) at time t = 0 with speed u at angle θ above the +x-axis.
  • Resolve initial velocity: u_x = u cosθ, u_y = u sinθ.
  • Horizontal motion has zero acceleration (a_x = 0), vertical motion has constant acceleration (a_y = −g).
  • Using rectilinear kinematics with constant acceleration (from Kinematics of particles: rectilinear motion): x(t) = x0 + (u cosθ) t y(t) = y0 + (u sinθ) t − (1/2) g t^2
  • Velocities: v_x(t) = u cosθ v_y(t) = u sinθ − g t
  • Speed and direction at time t: v(t) = √[v_x^2 + v_y^2], and direction angle φ with tanφ = v_y/v_x.
  1. Equation of trajectory is a parabola (derivation)
  • Eliminate t between x(t) and y(t) for level reference y0 = 0 (extendable to y0 ≠ 0 as well): From x = (u cosθ) t → t = x/(u cosθ). Substitute into y: y = (u sinθ)(x/(u cosθ)) − (1/2) g (x/(u cosθ))^2. Simplify: y = x tanθ − (g x^2)/(2 u^2 cos^2θ).
  • This is a quadratic in x, so the trajectory is a parabola opening downward.
  1. Time of flight, maximum height, and range on level ground (derivation)
  • Consider launch from ground level, y0 = 0, and landing back at y = 0 on level ground.
  • Time of flight T: Solve y(T) = 0 → 0 = (u sinθ) T − (1/2) g T^2 → T[(u sinθ) − (1/2) g T] = 0. The non-zero root is T = 2 u sinθ / g.
  • Maximum height H: At highest point v_y = 0. From v_y(t) = u sinθ − g t → t_H = u sinθ / g. Substitute into y(t): H = (u sinθ)(u sinθ / g) − (1/2) g (u sinθ / g)^2 = u^2 sin^2θ / (2 g).
  • Horizontal range R: R = x(T) = (u cosθ) T = (u cosθ)(2 u sinθ / g) = u^2 sin(2θ) / g.
  • Angle for maximum range: For fixed u, R(θ) = u^2 sin(2θ)/g is maximum when sin(2θ) = 1 → 2θ = 90° → θ = 45°.
  1. Projection from an elevation or to a lower/higher level (derivation)
  • Let y0 be the initial height relative to landing level (positive if launch point is above landing point). The time of flight is obtained by solving y(t) = 0: 0 = y0 + (u sinθ) t − (1/2) g t^2 → (1/2) g t^2 − (u sinθ) t − y0 = 0. The physically meaningful (positive) root gives time of flight. Range R = (u cosθ) t. Explicitly, t = [u sinθ + √((u sinθ)^2 + 2 g y0)]/g (take the + sign), so R = (u cosθ/g)[u sinθ + √((u sinθ)^2 + 2 g y0)].
  • Special case: horizontal projection from height h (i.e., θ = 0, y0 = h): x = u t, y = h − (1/2) g t^2. Time to hit ground t = √(2 h / g). Range R = u √(2 h / g).
  1. Velocity at any instant and at impact
  • At time t: v_x = u cosθ (constant), v_y = u sinθ − g t.
  • At highest point: v_y = 0, so speed = u cosθ, direction is horizontal. On level ground (y0 = 0), this occurs at t_H = T/2 and at horizontal position x = R/2.
  • Just before impact on level ground: t = T = 2 u sinθ / g, so v_y = −u sinθ; speed at impact = √[(u cosθ)^2 + (u sinθ)^2] = u; impact angle with +x-axis is −θ (symmetric for level ground).
  1. Useful geometric properties and targeting
  • For the same speed u and same level target at range R, there are two possible angles θ1 and θ2 satisfying sin(2θ) = g R / u^2 (if the RHS ≤ 1). The angles are complementary: θ1 + θ2 = 90°.

What to draw (diagram description for exam answers)

  • Draw Cartesian axes: x horizontal (right), y vertical (up). Mark origin at the launch point or at ground as required. Draw the projectile path as a downward-opening parabola.
  • Draw the initial velocity vector u at angle θ above the +x-axis. From its tail, draw horizontal component u cosθ and vertical component u sinθ using a right-angled triangle. Label g downward along the y-axis.
  • Mark key points: launch, highest point (where v_y = 0), and landing. Label R on the x-axis between launch and landing for level-ground problems. For elevated launch, show y0 as the vertical offset.

Formulas

x = x0 + (u cosθ)·t

  • x: horizontal position (m); x0: initial horizontal position (m); u: launch speed (m/s); θ: launch angle from +x-axis (degree or radian, be consistent); t: time from launch (s). Applies when horizontal acceleration is zero.

y = y0 + (u sinθ)·t − (1/2)·g·t^2

  • y: vertical position (m); y0: initial vertical position (m); g: gravitational acceleration (m/s^2), take g = 9.81 m/s^2 unless specified; others as above. Applies when vertical acceleration is constant −g.

v_x = u cosθ

  • v_x: horizontal component of velocity (m/s). Applies throughout flight under no air resistance.

v_y = u sinθ − g·t

  • v_y: vertical component of velocity (m/s). Applies throughout flight.

v = √(v_x^2 + v_y^2)

  • v: speed magnitude (m/s). Applies at any instant.

tanφ = v_y / v_x

  • φ: instantaneous direction angle of velocity measured from +x-axis (degree or radian). Applies when v_x ≠ 0.

y = x·tanθ − (g·x^2)/(2·u^2·cos^2θ)

  • Equation of trajectory; x, y as positions (m); u, θ, g as above. Applies for projectile with origin y0 = 0; for y0 ≠ 0 add y0 to right-hand side. Valid only when cosθ ≠ 0 (i.e., not a vertical launch).

T = (2·u·sinθ)/g

  • T: time of flight on level ground (s). Applies for launch and landing at same level (y0 = 0 to y = 0).

H = (u^2·sin^2θ)/(2·g)

  • H: maximum height above launch level (m). Applies for any θ with upward component (θ ∈ (0°, 180°)).

R = (u^2·sin(2θ))/g

  • R: horizontal range on level ground (m). Applies when landing level equals launch level and surface is horizontal.

θ_max range = 45°

  • Launch angle for maximum horizontal range on level ground for a given u. Assumes no air resistance and flat terrain.

t = √(2·h/g)

  • Time to hit ground for horizontal projection from height h (s). Applies when initial vertical speed is zero and landing is at ground level h below launch.

R_horizontal launch = u·√(2·h/g)

  • Range for horizontal launch from height h (m). Applies under the same conditions as above.

sin(2θ) = (g·R)/u^2

  • Relationship for hitting a same-level target at range R with speed u. Solutions for θ exist if 0 ≤ (gR/u^2) ≤ 1.

Worked examples

Example 1: Level ground — time of flight, maximum height, and range Given: Launch speed u = 30 m/s, launch angle θ = 40°, level ground (start and end at y = 0), g = 9.81 m/s^2.

  1. Time of flight T
  • Formula: T = (2 u sinθ)/g
  • Numbers: T = (2 × 30 m/s × sin40°) / (9.81 m/s^2)
  • Compute sin40° ≈ 0.6428
  • T = (60 × 0.6428) / 9.81 s = 38.568 / 9.81 s = 3.93 s
  • Answer: T ≈ 3.93 s
  1. Maximum height H
  • Formula: H = (u^2 sin^2θ) / (2 g)
  • Numbers: H = (30^2 m^2/s^2 × sin^2 40°) / (2 × 9.81 m/s^2)
  • Compute u^2 = 900 m^2/s^2; sin^2 40° ≈ 0.4132
  • H = (900 × 0.4132) / 19.62 m = 371.88 / 19.62 m = 18.96 m
  • Answer: H ≈ 18.96 m
  1. Range R
  • Formula: R = (u^2 sin 2θ)/g
  • Numbers: R = (900 m^2/s^2 × sin 80°) / (9.81 m/s^2)
  • Compute sin80° ≈ 0.9848
  • R = (900 × 0.9848) / 9.81 m = 886.32 / 9.81 m = 90.33 m
  • Answer: R ≈ 90.33 m

Example 2: Projectile from a height — time of flight and range Given: Launch speed u = 20 m/s, angle θ = 30°, initial height y0 = 10 m above level ground, g = 9.81 m/s^2. Find time to hit ground and horizontal range.

  1. Time of flight t
  • Vertical position equation: y = y0 + (u sinθ) t − (1/2) g t^2; set y = 0 at ground
  • Formula rearranged: (1/2) g t^2 − (u sinθ) t − y0 = 0
  • Numbers: (1/2)(9.81) t^2 − (20 × 0.5) t − 10 = 0 → 4.905 t^2 − 10 t − 10 = 0
  • Quadratic solution: t = [10 + √(10^2 + 4 × 4.905 × 10)] / (2 × 4.905) s (take positive root)
  • Compute discriminant: 100 + 196.2 = 296.2; √296.2 ≈ 17.21
  • t = (10 + 17.21) / 9.81 s = 27.21 / 9.81 s = 2.77 s
  • Answer: t ≈ 2.77 s
  1. Horizontal range R
  • Formula: R = (u cosθ) t
  • Numbers: cos30° ≈ 0.8660; R = (20 × 0.8660 m/s) × 2.77 s = 17.320 m/s × 2.77 s = 47.98 m
  • Answer: R ≈ 48.0 m

Example 3: Hitting a same-level target — find possible angles Given: Required horizontal range R = 100 m on level ground, available launch speed u = 40 m/s, g = 9.81 m/s^2. Find possible launch angles θ.

  1. Relation between θ, R, u
  • Formula: sin(2θ) = (g R)/u^2
  • Numbers: (g R)/u^2 = (9.81 × 100) / (40^2) = 981 / 1600 = 0.6131
  1. Solve for 2θ and θ
  • 2θ = arcsin(0.6131) → principal solution 2θ ≈ 37.8°; supplementary solution 2θ ≈ 180° − 37.8° = 142.2°
  • Therefore θ1 ≈ 18.9°, θ2 ≈ 71.1°
  • Check (optional): sin(2 × 18.9°) ≈ sin 37.8° ≈ 0.6131; sin(2 × 71.1°) ≈ sin 142.2° ≈ 0.6131
  • Answer: θ ≈ 18.9° or 71.1°

Common mistakes

  • Sign errors in vertical motion: writing y = y0 + u sinθ t + (1/2) g t^2 instead of subtracting the gravity term when y is positive upward.
  • Using g = 9.8 without units, or switching to g = 10 arbitrarily when the problem specifies g = 9.81 m/s^2.
  • Assuming horizontal velocity changes under gravity; v_x remains constant when air resistance is neglected.
  • Applying level-ground formulas (T, R, H) when the launch and landing levels differ (y0 ≠ 0).
  • Dropping units in intermediate steps, leading to wrong interpretations or unit-inconsistent results.
  • Rounding too early; this can cause noticeable errors, especially when squaring or using trigonometric functions.

For your exam

  • Numericals: Compute time, height, and range for given u and θ; find θ for given u and R; elevated or depressed launch cases (solve quadratic for time). Always list given data with units, write the formula before substituting numbers, carry units, and present a boxed/bold final answer.
  • Diagrams: Draw and label axes, initial velocity components, g direction, and key points (apex, range). A neat, correctly labeled diagram can earn method marks.
  • Conceptual: Explain independence of horizontal and vertical motions; discuss velocity at the highest point; explain why the path is parabolic.

A full-marks answer typically includes: correct assumptions, clear diagram, correct formulae, step-by-step derivation or calculation, proper units, and a concise concluding statement.

Quick check

  1. Write the equation of trajectory y(x) for a projectile launched from ground with speed u at angle θ.
  2. A ball is projected horizontally at 12 m/s from a 20 m high platform. How long until it hits the ground (g = 9.81 m/s^2)?
  3. For fixed u, at what angle is the horizontal range on level ground maximum, and what is that maximum range?

Answers: 1) y = x tanθ − (g x^2)/(2 u^2 cos^2θ); 2) t = √(2 h / g) = √(40/9.81) ≈ 2.02 s; 3) At θ = 45°, R_max = u^2/g.

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?