Civil Engineering (University) is coming soon
We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.
Civil Engineering (University)
Engineering Mechanics
Force systems and equilibrium, friction, trusses and centroids, moment of inertia, kinematics and kinetics of particles and rigid bodies.
Your progress in this subject0 of 12 · 0%
- 1Moments and couplesMoments and couples: definitions, Varignon’s theorem, 2D/3D moment calculation (point and axis), properties of a couple, and force–couple equivalence with worked numerical examples.
- 2Equilibrium and free-body diagramsEquilibrium conditions for particles and rigid bodies and how to draw and use free-body diagrams to solve 2D statics problems.
- 3Support reactions of beamsSupport reactions of beams: types of supports, free‑body diagram, equivalent loads for UDL/UVL/couples, and solving reactions using ΣFx=0, ΣFy=0, ΣM=0 with worked examples.
- 4Friction and belt frictionBasics of dry friction and belt (capstan) friction, including laws, angle of friction, angle of repose, cone of friction, capstan equation for flat and V-belts, and related calculations.
- 5Centroid and centre of gravityCentroid and centre of gravity: definitions, assumptions, formulas for lines/areas/volumes, standard centroids, composite bodies with holes, distributed loads’ line of action, Pappus theorems, and exam-style worked examples.
- 6Kinematics of particles: rectilinear motionKinematics of particles: rectilinear motion—definitions, laws, v–a–x–t relations, graphs, constant/variable acceleration, relative motion, and exam-style examples.
- 7Curvilinear motion: rectangular, normal and tangential componentsCurvilinear motion of a particle resolved using rectangular (x–y–z) components and path-based normal–tangential components, with definitions, derivations, formulas, and worked examples.
- 8Projectile motionProjectile motion: motion of a particle under gravity with no other forces; equations, range/time/height results, special cases (horizontal launch, unequal heights), and exam-style numericals.
- 9Kinetics: Newton's second lawNewton’s second law in kinetics: relating net force to mass and acceleration, component form (rectilinear and normal–tangential), D’Alembert’s principle, inertial vs non-inertial frames, and solving standard particle dynamics problems.
- 10Work–energy principleWork–energy principle: relate work of forces to change in kinetic energy, include potential energy, conservative/nonconservative forces, springs, power, and typical exam derivations and numericals.
- 11Impulse and momentumImpulse–momentum for particles and planar systems: linear and angular forms, impulsive forces, F–t area, conservation when external impulse is negligible, with worked 1D/2D and angular examples.
- 12Collision of elastic bodiesCollision of elastic bodies: momentum conservation, Newton’s law of restitution, direct and oblique impacts, energy loss, and exam-standard problem solving.
Coming next in Engineering Mechanics
- Force systems and resultants· notes coming
- Ladder and wedge friction· notes coming
- Cables and frames· notes coming
- D'Alembert's principle and connected bodies· notes coming