Civil Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Collision of elastic bodies

Collision of elastic bodies: momentum conservation, Newton’s law of restitution, direct and oblique impacts, energy loss, and exam-standard problem solving.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Key ideas

  • Definition — Direct central impact: A head-on collision of two bodies whose centers move along the same straight line as the line of impact.
  • Definition — Oblique impact: A collision where initial velocities are not aligned with the line of impact; velocities have both normal and tangential components to the contact surface.
  • Definition — Coefficient of restitution (e): A property of the contacting pair defined along the line of impact by Newton’s law of restitution: Exact statement — “The relative speed of separation of two bodies along the line of impact is e times the relative speed of approach along that line.” Mathematically along unit normal n from body 1 to body 2: (v2 − v1) · n = − e [(u2 − u1) · n], with 0 ≤ e ≤ 1 for most materials. Special cases: e = 1 perfectly elastic (no kinetic energy loss along the line of impact), e = 0 perfectly plastic (bodies stick or have no separation along the line of impact).
  • Principle — Conservation of linear momentum for the system during impact: If external impulsive forces are negligible over the short collision time, total linear momentum of the colliding bodies is conserved. In one dimension along the line of impact: m1 u1 + m2 u2 = m1 v1 + m2 v2. Assumptions: short collision duration, external impulses negligible compared to internal impulse between bodies; valid for smooth horizontal contacts or when gravity’s impulse over Δt is negligible.
  • Note — Kinetic energy is not generally conserved in impact unless e = 1. Energy is lost mainly as heat, sound, and local deformation.

Derivations commonly asked

  1. Direct central impact (two bodies on a line) — expressions for final velocities
  • Assumptions: point masses m1, m2; initial velocities u1, u2 along the line; final velocities v1, v2 along the same line; external impulses negligible; coefficient of restitution e (constant for the pair).
  • Equations: Momentum: m1 u1 + m2 u2 = m1 v1 + m2 v2. Restitution (1D form, taking positive direction along the initial motion): v2 − v1 = e (u1 − u2).
  • Solve simultaneously: From restitution: v2 = v1 + e (u1 − u2). Substitute into momentum: m1 u1 + m2 u2 = m1 v1 + m2 [v1 + e (u1 − u2)]. Hence (m1 + m2) v1 = m1 u1 + m2 u2 − m2 e (u1 − u2). So v1 = [m1 u1 + m2 u2 − m2 e (u1 − u2)] / (m1 + m2). Similarly, v2 = [m1 u1 + m2 u2 + m1 e (u1 − u2)] / (m1 + m2). These are standard textbook results for 1D direct central impact.
  1. Loss of kinetic energy in a direct central impact
  • Initial kinetic energy: KEi = (1/2) m1 u1² + (1/2) m2 u2².
  • Final kinetic energy: KEf = (1/2) m1 v1² + (1/2) m2 v2².
  • Result to show: ΔKE = KEi − KEf = (1/2) μ (1 − e²) (u1 − u2)², where μ is the reduced mass μ = (m1 m2)/(m1 + m2).
  • Sketch of derivation: Write momentum and restitution equations; eliminate v1, v2; expand KE difference; simplify using algebraic identities to reach the compact formula above. This is a standard exam derivation.
  1. Oblique impact of a smooth sphere on a smooth wall
  • Assumptions: No tangential impulse (smooth contact), so tangential component of velocity is unchanged; only normal component changes by restitution.
  • Let the wall be vertical; the line of impact is normal to the wall (horizontal). Decompose the incident velocity u into normal (un) and tangential (ut) components: un = u cos θ, ut = u sin θ, where θ is the angle between u and the wall-normal. On rebound: vn = − e un (reversed direction), vt = ut. Magnitude after impact: v = sqrt( (e un)² + ut² ). Rebound angle with normal φ satisfies: tan φ = vt / |vn| = (1/e) tan θ.

Diagrams to draw and label in exam answers

  • Direct central impact diagram: Draw a straight horizontal line. Place two spheres A (m1) and B (m2) on the line, A on the left moving right with u1, B ahead moving right with u2 (or left). Mark the positive direction to the right. Show velocities before (u1, u2) and after (v1, v2) along the same line. Below the line, write momentum and restitution equations.
  • Oblique impact with wall: Draw a vertical wall as a thick vertical line. Draw a sphere approaching at velocity vector u making angle θ with the wall-normal (normal drawn as a horizontal arrow from the wall). Resolve u into components: un normal to wall, ut along wall. After impact, draw reflected vector v with reduced normal component e·un in the opposite direction and unchanged tangential component ut. Label rebound angle φ with the normal. Note “smooth wall” near the contact.

Formulas

  • v2 − v1 = e (u1 − u2) — Restitution for direct central impact (1D scalar with consistent positive direction).
  • v1 = [m1 u1 + m2 u2 − m2 e (u1 − u2)] / (m1 + m2) — Final velocity of mass m1 after 1D direct central impact.
  • v2 = [m1 u1 + m2 u2 + m1 e (u1 − u2)] / (m1 + m2) — Final velocity of mass m2 after 1D direct central impact. Also, for a perfectly plastic (e = 0) direct central impact, both bodies move together with common velocity v = (m1 u1 + m2 u2)/(m1 + m2).
  • ΔKE = (1/2) μ (1 − e²) (u1 − u2)² — Loss of kinetic energy in 1D direct impact; μ = (m1 m2)/(m1 + m2) is reduced mass (kg). Applies along the line of impact when momentum and restitution hold.
  • vn = − e un — Normal component after impact with smooth wall; un, vn: m/s. Negative sign indicates reversal of direction.
  • vt = ut — Tangential component unchanged for a smooth (frictionless) wall.
  • tan φ = (1/e) tan θ — Relation between rebound angle φ and incident angle θ measured with the wall-normal for smooth wall.
  • e = sqrt(h2 / h1) — For a vertical bounce on the same surface: ratio of rebound height h2 to drop height h1 (m), derived from energy and definition of e.

Worked examples

Example 1 — Direct central impact between two spheres Given: m1 = 2.0 kg, m2 = 3.0 kg; u1 = +6.0 m/s (to the right), u2 = +2.0 m/s (to the right); coefficient of restitution e = 0.80. Find final velocities v1, v2 and energy lost.

Steps:

  1. Write equations
    • Momentum: m1 u1 + m2 u2 = m1 v1 + m2 v2.
    • Restitution: v2 − v1 = e (u1 − u2).
  2. Substitute numbers into restitution: v2 − v1 = 0.80 (6.0 − 2.0) = 3.2 m/s.
  3. Substitute numbers into momentum: 2.0(6.0) + 3.0(2.0) = 2.0 v1 + 3.0 v2 → 18.0 = 2.0 v1 + 3.0 v2.
  4. Solve: from restitution, v2 = v1 + 3.2. Substitute into momentum: 18.0 = 2.0 v1 + 3.0 (v1 + 3.2) → 18.0 = 5.0 v1 + 9.6 → v1 = (18.0 − 9.6)/5.0 = 1.68 m/s.
  5. Then v2 = 1.68 + 3.2 = 4.88 m/s.
  6. Energy check
    • Initial KE: KEi = 0.5·2.0·(6.0)² + 0.5·3.0·(2.0)² = 36.0 + 6.0 = 42.0 J.
    • Final KE: KEf = 0.5·2.0·(1.68)² + 0.5·3.0·(4.88)² = 1.0·2.8224 + 1.5·23.8144 = 2.8224 + 35.7216 = 38.544 J.
    • Energy loss: ΔKE = 42.0 − 38.544 = 3.456 J.
    • Using the formula: μ = (2.0·3.0)/(2.0 + 3.0) = 1.2 kg; ΔKE = 0.5·1.2·(1 − 0.80²)·(6.0 − 2.0)² = 0.6·0.36·16 = 3.456 J (matches).

Answer: v1 = 1.68 m/s, v2 = 4.88 m/s, energy lost = 3.456 J. Final velocities are to the right (positive).

Example 2 — Oblique impact of a smooth sphere on a smooth vertical wall Given: Speed before impact u = 15.0 m/s; angle with the wall-normal θ = 40.0°; coefficient of restitution e = 0.60. Find speed after impact v and rebound angle φ with the normal.

Steps:

  1. Resolve u into components relative to the wall:
    • Normal component: un = u cos θ = 15.0 cos 40.0° = 15.0 × 0.7660 = 11.490 m/s.
    • Tangential component: ut = u sin θ = 15.0 sin 40.0° = 15.0 × 0.6428 = 9.642 m/s.
  2. For a smooth wall:
    • vn = − e un = −0.60 × 11.490 = −6.894 m/s (reversed direction).
    • vt = ut = 9.642 m/s (unchanged).
  3. Speed after impact:
    • v = sqrt(vn² + vt²) = sqrt( (6.894)² + (9.642)² ) = sqrt(47.50 + 92.96) = sqrt(140.46) = 11.85 m/s.
  4. Rebound angle with the normal:
    • tan φ = |vt| / |vn| = 9.642 / 6.894 = 1.398 → φ = arctan(1.398) = 54.9°.

Answer: Speed after impact v ≈ 11.85 m/s; rebound angle with the normal φ ≈ 54.9° (measured on the opposite side of the normal).

Example 3 — Vertical bounce to find e from rebound height A small ball is dropped from height h1 = 2.00 m onto a fixed horizontal smooth surface and rebounds to height h2 = 1.25 m. Find the coefficient of restitution e and the speed just before impact.

Steps:

  1. Speed just before impact by energy (Kinematics/Work–energy principle): u = sqrt(2 g h1) = sqrt(2 × 9.81 × 2.00) = sqrt(39.24) = 6.264 m/s downward.
  2. Speed just after impact upward based on rebound height: v = sqrt(2 g h2) = sqrt(2 × 9.81 × 1.25) = sqrt(24.525) = 4.952 m/s upward.
  3. For a vertical bounce on the same surface: e = v / u = 4.952 / 6.264 = 0.791.

Answer: e ≈ 0.791; speed just before impact ≈ 6.264 m/s (downward).

Common mistakes

  • Assuming kinetic energy is conserved when e < 1. Only momentum (not energy) is conserved in general impacts.
  • Ignoring external impulses (e.g., a body colliding while on a rough horizontal table attached to a wall). Momentum conservation applies to the isolated colliding pair only when external impulses are negligible.
  • Using e outside physical bounds (e < 0 or e > 1) in basic problems with non-energized materials. For advanced cases (e > 1 due to stored internal energy or active mechanisms) are not part of this syllabus; assume 0 ≤ e ≤ 1.
  • Forgetting that tangential velocity changes require frictional impulse. For a smooth wall or smooth spheres, tangential components are unchanged.

For your exam

  • Diagrams: show line of impact and velocity components; clearly label normal and tangential components and angles with the normal. State assumptions (smooth, no external impulse, short duration) at the start of solutions.
  • Full-marks answers: correct formulas with proper symbols and SI units, clear sign convention, step-by-step algebra, units carried through, final numerical values highlighted, and a brief physical check (e.g., “v2 > v1 since m1 was faster initially,” or “angle with normal increases after impact when e < 1”).

Quick check

  1. State Newton’s law of restitution in words and write its vector form along the line of impact.
  2. Two equal masses collide directly with u1 = +5 m/s and u2 = 0, e = 0.5. What are v1 and v2?
  3. A ball hits a smooth wall at 12 m/s making a 30° angle with the wall-normal. If e = 0.75, what is the speed after impact?

Answers: (1) Relative speed of separation along the line of impact equals e times relative speed of approach along that line; (v2 − v1) · n = − e [(u2 − u1) · n]. (2) Using formulas: v1 = (u1 − e u1)/2 = 1.25 m/s, v2 = (u1 + e u1)/2 = 3.75 m/s. (3) Components: un = 12 cos 30° = 10.392 m/s, ut = 12 sin 30° = 6.000 m/s; after: vn = − 0.75 × 10.392 = − 7.794 m/s (reversed), vt = 6.000 m/s; speed v = sqrt(7.794² + 6.000²) = 9.84 m/s.

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?