Civil Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Impulse and momentum

Impulse–momentum for particles and planar systems: linear and angular forms, impulsive forces, F–t area, conservation when external impulse is negligible, with worked 1D/2D and angular examples.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Engineers often face loads that act for a short time but with large effect: a hammer blow, a car crash, a robot gripper snapping shut, or a press operation. The impulse–momentum method simplifies such problems by relating the time-integral of force to the change in motion, avoiding step-by-step acceleration analysis.

Key ideas

“For a particle of constant mass m, subjected to a resultant force ΣF(t) over a time interval t1 to t2, the change in linear momentum equals the impulse of the resultant force over that interval.” Mathematical form: m·v2 − m·v1 = ∫[t1→t2] ΣF(t) dt. Assumptions: mass m is constant over [t1, t2]; motion is described relative to an inertial frame; forces are known or can be approximated over time.

  • Derivation from first principles (particle):

    1. Newton’s second law: ΣF = m·a = m·dv/dt (assuming constant mass).
    2. Rearrange: ΣF dt = m dv.
    3. Integrate t from t1 to t2 and v from v1 to v2: ∫[t1→t2] ΣF dt = m∫[v1→v2] dv.
    4. Evaluate right side: m(v2 − v1). Hence m·v2 − m·v1 = ∫[t1→t2] ΣF dt.
  • Impulsive force: A force that acts over a very short time Δt, often with very large magnitude, such that its impulse J is finite and dominant compared to other forces (e.g., weight, small friction) during Δt. In analysis of an impulsive event, small continuous forces may be neglected over the short interval.

  • Average force over an interval: If F varies with time, define F_avg so that J = F_avg Δt, where Δt = t2 − t1. F_avg is the constant force that would produce the same impulse over the interval.

  • Conservation of linear momentum (during an impulsive internal event): For an isolated system (or when the net external impulse is negligible over the short event), total linear momentum is conserved: Σ m_i v_i (after) = Σ m_i v_i (before). Internal impulses between members cancel pairwise by Newton’s third law. Use this only when justified that external impulse ≈ 0 over the interval.

  • Conservation of angular momentum about a point O (during an impulsive event): If the net external moment impulse about O over the short interval is negligible, the angular momentum about O is conserved: H_O2 = H_O1. For a planar rigid body about a fixed axis through O, this reduces to I_O·ω2 = I_O·ω1.

  • Diagram to draw (linear case): Draw a particle as a small filled circle; show initial velocity vector v1 with magnitude and direction; show applied forces during the interval (e.g., a horizontal force F(t)); mark the time window [t1, t2]. Next to it, sketch the F–t diagram: time t on horizontal axis, force component on vertical axis. Shade the area under F(t) between t1 and t2 and label it “impulse J.”

  • Angular momentum about a point O: For a particle of mass m at position r from point O with velocity v, the angular momentum about O is H_O = r × (m v). It is a vector perpendicular to the plane containing r and v (right-hand rule).

  • Moment (torque) of a force about O: M_O = r × F. For planar problems, its scalar magnitude about O is M_O = r·F⊥ = F·r⊥, with sign by right-hand rule.

  • Exact statement (particle): Principle of angular impulse and momentum about O “For a particle of constant mass m, the change in angular momentum about a fixed point O over a time interval equals the angular impulse of the resultant moment of forces about O over that interval.” Mathematical form: H_O2 − H_O1 = ∫[t1→t2] ΣM_O(t) dt. Assumptions: m is constant; O is fixed in an inertial frame; forces and their lines of action are known over time.

  • Derivation from first principles (particle):

    1. Start with Newton’s second law: ΣF = m·a.
    2. Take moment about O: ΣM_O = r × ΣF = r × (m a).
    3. Recognize time derivative of angular momentum: d/dt [r × (m v)] = r × (m a) + v × (m v). Since v × v = 0, we get dH_O/dt = ΣM_O.
    4. Integrate over t1 to t2: ∫ ΣM_O dt = H_O2 − H_O1.
  • Planar rigid body about a fixed axis (common exam variant): If all motion is planar and we take moments about a fixed point O (e.g., the center of a rotating disk), for a rigid body with mass moment of inertia I_O about O and angular velocity ω, the angular momentum about O is H_O = I_O ω (direction by right-hand rule). Then the angular impulse–momentum relation becomes I_O ω2 − I_O ω1 = ∫[t1→t2] ΣM_O(t) dt. Assumptions: body is rigid; axis through O is fixed in an inertial frame; I_O is constant.

  • Diagram to draw (angular case): Draw point O. Sketch the body or particle location r from O. Show applied force F at its line of action; indicate perpendicular distance or show vector cross product direction. Mark initial ω1 (or v1) and final ω2 (or v2). Next, sketch M_O–t diagram over [t1, t2] and shade the area labeled “angular impulse.”

  • Choosing the point O: In angular problems, choose O to simplify moments. If the line of action of a large unknown reaction force passes through O, its moment about O is zero; this removes it from the angular equation. Common choices are a hinge, ground contact point, or center of mass (if convenient).

  • Relationship between work–energy and impulse–momentum: Work–energy (another topic) relates force components along the displacement to change in kinetic energy; impulse–momentum relates force components over time to change in momentum. Use impulse–momentum when time or impulses are given, when forces are impulsive, or when acceleration is inconvenient to integrate with respect to displacement.

  • What is not covered here: Details of impacts and restitution belong to the separate topic “Collision of elastic bodies.” Here, you may still use conservation of momentum over the short impact if external impulses are negligible, but do not use coefficient of restitution in this topic.

Formulas

p: linear momentum (kg·m/s); m: mass (kg); v: velocity (m/s). Applies to any particle.

  • J = ∫[t1→t2] F(t) dt J: linear impulse (N·s); F(t): force vector (N); t: time (s). Area under F–t curve.

  • m·v2 − m·v1 = ∫[t1→t2] ΣF(t) dt Linear impulse–momentum for a particle, constant mass, inertial frame.

  • J = F_avg · Δt F_avg: average force over Δt (N); Δt = t2 − t1 (s). Useful when only average is given.

  • Σ m_i v_i (after) = Σ m_i v_i (before) Conservation of linear momentum for a system when net external impulse ≈ 0 over the event.

  • H_O = r × (m·v) H_O: angular momentum about point O (kg·m^2/s); r: position vector from O to particle (m); v: velocity (m/s). Vector cross product.

  • ∫[t1→t2] ΣM_O(t) dt = H_O2 − H_O1 Angular impulse–momentum about O. ΣM_O: resultant moment about O (N·m); t: time (s).

  • M_O = r × F Moment (torque) of a force about O (N·m). In planar scalar form, M_O = F·r⊥ with sign.

  • H_O = I_O·ω For a rigid body about a fixed axis through O. I_O: mass moment of inertia about O (kg·m^2); ω: angular velocity (rad/s).

  • I_O·ω2 − I_O·ω1 = ∫[t1→t2] ΣM_O(t) dt Angular impulse–momentum for planar rigid body about fixed axis O.

Worked examples

Example 1: Variable force over time on a particle (1D) Given: A 2.0 kg particle moves along +x with initial velocity v1 = 3.0 m/s. A time-dependent force F_x(t) = (4 + 2t) N acts in +x from t = 0 to t = 5.0 s. Find the final velocity v2.

Steps:

  1. Identify impulse along x: J_x = ∫[0→5] (4 + 2t) dt.
  2. Compute the integral: J_x = [4t + t^2]_0^5 = 4·5 + 5^2 = 20 + 25 = 45 N·s.
  3. Apply linear impulse–momentum in x: m·v2 − m·v1 = J_x.
  4. Substitute numbers with units: 2.0 kg · v2 − 2.0 kg · (3.0 m/s) = 45 N·s.
  5. Solve for v2: 2.0 v2 − 6.0 = 45 → 2.0 v2 = 51 → v2 = 25.5 m/s.

Answer: The final speed in +x is 25.5 m/s.

Example 2: 2D impulse and change in velocity direction Given: A 1.00 kg particle has initial velocity v1 = (2 i − 1 j) m/s. During a very short interval, it experiences a net impulse J = (3 i + 4 j) N·s. Find its final velocity vector v2 and its speed.

Steps:

  1. Use J = m(v2 − v1) vector form: v2 = v1 + J/m.
  2. Compute J/m: (3 i + 4 j) N·s / 1.00 kg = (3 i + 4 j) (m/s).
  3. Add to v1: v2 = (2 + 3) i + (−1 + 4) j = (5 i + 3 j) m/s.
  4. Speed magnitude: |v2| = √(5^2 + 3^2) m/s = √34 m/s ≈ 5.83 m/s.

Answer: v2 = (5 i + 3 j) m/s, speed ≈ 5.83 m/s.

Example 3: Angular impulse on a disk about its center Given: A uniform solid disk of mass m = 10.0 kg and radius r = 0.40 m is initially at rest. A constant couple (torque) M = 8.0 N·m is applied about its central axis for Δt = 2.0 s. Find the final angular speed ω2.

Data: For a uniform solid disk about its center, I_O = (1/2) m r^2.

Steps:

  1. Compute I_O: I_O = 0.5 · 10.0 kg · (0.40 m)^2 = 0.5 · 10.0 · 0.16 kg·m^2 = 0.8 kg·m^2.
  2. Angular impulse: ∫ M dt = M · Δt = 8.0 N·m · 2.0 s = 16 N·m·s.
  3. Apply angular impulse–momentum: I_O·ω2 − I_O·ω1 = ∫ ΣM_O dt. With ω1 = 0: 0.8 · ω2 = 16.
  4. Solve for ω2: ω2 = 16 / 0.8 = 20 rad/s.

Answer: The disk’s final angular speed is 20 rad/s.

Example 4: Conservation of momentum during an internal impulsive push-off Given: Two skaters stand still on nearly frictionless ice (external horizontal impulse ≈ 0 during the push). Skater A: m_A = 60 kg; Skater B: m_B = 40 kg. After they push off, A moves to the right at 1.5 m/s. Find B’s velocity (magnitude and direction) immediately after separation.

Steps:

  1. State conservation of linear momentum (horizontal): m_A v_A + m_B v_B = 0 (initial momentum was zero; external impulse negligible during push).
  2. Substitute knowns and solve for v_B (right positive): 60 kg · (+1.5 m/s) + 40 kg · v_B = 0.
  3. Compute: 90 + 40 v_B = 0 → v_B = −90/40 = −2.25 m/s.

Answer: Skater B moves left at speed 2.25 m/s (i.e., v_B = −2.25 m/s).

Common mistakes

  • Mixing time-based impulse–momentum with displacement-based work–energy incorrectly. Choose the method that matches given information (time/impulse vs displacement/work).
  • In angular problems, taking moments about a point that itself accelerates or is not fixed in an inertial frame, without accounting for that motion. Prefer fixed points in an inertial frame for the basic form used here.
  • Using degrees for angular speed; ω must be in rad/s to be consistent with I·ω units. For angular impulse and angular momentum, keep units as N·m·s and kg·m^2/s respectively (no degrees).
  • For rigid bodies, using the wrong mass moment of inertia I_O. Always compute I about the correct axis using the right formula or parallel-axis theorem if needed.

For your exam

  • Short notes: average force vs instantaneous force; impulsive vs non-impulsive forces; when to neglect weight/friction during very short events; choosing point O to eliminate unknown reactions.
  • Numericals: integrate F(t) over time to get impulse; handle vector components; compute final velocity v2; determine required force duration to achieve a target speed; compute angular speed from a time-applied couple; find impulse from an M–t diagram area. If conservation of momentum is justified, write it and explain why external impulse is negligible.
  • Rigid body planar variants: use H_O = I_O ω and I_O ω2 − I_O ω1 = ∫ ΣM_O dt for disks, rods, wheels. Quote the correct I_O and show units.
  • Presentation for full marks: start with the governing equation (write the vector form, then component if needed); state assumptions; show the integral or area under F–t/M–t; substitute numbers with units at each step; box or bold the final answer with correct units and direction.

Quick check

  1. A constant force of 10 N acts in +x on a 5 kg block for 0.8 s. What is the impulse and the change in velocity?
  2. What is the angular impulse if a constant moment of 6 N·m acts for 0.5 s? What change in angular momentum does it cause?
  3. State one condition under which you can use conservation of linear momentum during a very short event.

Answers: 1) J = 10·0.8 = 8 N·s; Δv = J/m = 8/5 = 1.6 m/s in +x. 2) Angular impulse = 6·0.5 = 3 N·m·s; it equals ΔH (change in angular momentum) of 3 kg·m^2/s about the axis. 3) When the net external impulse over the event is negligible (system effectively isolated).

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?