Civil Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Moments and couples

Moments and couples: definitions, Varignon’s theorem, 2D/3D moment calculation (point and axis), properties of a couple, and force–couple equivalence with worked numerical examples.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Key ideas

  • Principle of transmissibility (rigid bodies): A force may be applied anywhere along its line of action without changing the external effect on a rigid body.
  • Moment (of a force) about a point: The rotational effect of a force about a point. Magnitude equals force × perpendicular distance from the point to the force’s line of action. Direction is given by right‑hand rule. SI unit: N·m.
    • Exact statement: The moment of a force F about a point O is the vector M_O = r × F, where r is the position vector from O to any point on the line of action of F; its magnitude is |M_O| = |F| d⊥ and its direction is perpendicular to the plane containing r and F, following the right-hand rule.
    • Scalar (2D) sign convention: Counterclockwise (CCW) positive, clockwise (CW) negative, unless stated otherwise.
  • Moment (of a force) about an axis: The component of the moment about a specified axis with unit vector n̂. Exact statement: M_axis = n̂ · (r × F). This equals the tendency to rotate about that axis.
  • Couple: Two forces of equal magnitude, opposite direction, and parallel lines of action separated by a distance. Net force is zero but net moment is non-zero. SI unit: N·m.
    • Exact statement: The moment of a couple is independent of the reference point and equals F·d⊥, where F is the magnitude of either force and d⊥ is the perpendicular distance between their lines of action. The couple is a free vector (its effect is the same wherever applied on the body). Its direction is perpendicular to the plane of the couple by the right‑hand rule.
  • Equivalent force–couple system at a point: Any single force applied at a point A can be moved to a different point O if we add a couple M_O = r_AO × F. More generally, any system of forces can be reduced to a resultant force R = ΣF applied at O and a resultant moment M_O = Σ(r_i × F_i) about O.
  • Varignon’s Theorem (Principle of Moments): The moment of a force about a point equals the algebraic sum of the moments of its components about the same point. Exact statement: For any force F resolved into components F1, F2, …, M_O(F) = M_O(F1) + M_O(F2) + … Assumptions: Same point O; components sum vectorially to the original force; rigid body.

Derivations (commonly asked):

  1. Vector definition → scalar “force × perpendicular distance”
  • Start: M_O = r × F.
  • Magnitude |M_O| = |r||F| sin θ, where θ is the angle between r and F.
  • The perpendicular distance d⊥ from O to the line of action of F is d⊥ = |r| sin θ.
  • Therefore |M_O| = |F| d⊥. Sense by right-hand rule (curl fingers from r to F; thumb shows direction of M_O vector; in 2D, positive CCW by sign convention).
  1. Independence of couple moment from reference point
  • Consider two equal and opposite parallel forces +F at point A and −F at point B.
  • Moment about any point O: M_O = r_AO × F + r_BO × (−F) = (r_AO − r_BO) × F = r_BA × F.
  • The vector r_BA depends only on the geometry between lines of action, not on O; hence moment is the same about any point. Scalar magnitude is F d⊥.
  1. Varignon’s Theorem
  • Let F = F1 + F2. Then M_O(F) = r × F = r × (F1 + F2) = r × F1 + r × F2 = M_O(F1) + M_O(F2).
  • Extends to any finite number of components by induction.
  1. Moment about an axis formula
  • The total moment vector about O is M_O = r × F.
  • Its component along an axis with unit vector n̂ is M_axis = n̂ · M_O = n̂ · (r × F).
  • This gives the scalar tendency to rotate about that axis only.

What to draw and label (exam diagrams):

  • Moment of a force about a point: Draw point O, a slanted force F acting at point A, the line of action of F, and the shortest perpendicular from O to this line. Label F, O, A, the perpendicular distance d⊥, and indicate CCW/CW sense with a curved arrow.
  • Couple: Draw two parallel arrows of equal length in opposite directions at points A and B. Show separation distance d⊥ with a dimension line. Indicate the resulting rotation sense with a curved arrow and label the couple moment M = F d⊥.
  • Varignon’s theorem: Draw a force F at A resolved into components Fx (horizontal) and Fy (vertical). Show distances from O to the lines of action of Fx and Fy. Indicate individual moments and show their algebraic sum equals the moment of F.
  • Moment about an axis: Draw 3D axes. Show force F applied at P with position vector r from origin O. Draw axis with unit vector n̂. Indicate the triple product M_axis = n̂ · (r × F).

Assumptions to state in answers:

  • Bodies are rigid; geometry does not change under load.
  • Forces act at known points/lines with known directions and magnitudes.
  • For 2D problems, forces and points lie in (x–y) plane, and CCW positive sign convention is used unless given otherwise.
  • Right-handed coordinate system.

Connections to other topics:

  • Use Equilibrium and free-body diagrams to set ΣM = 0 and ΣF = 0 in statics problems.
  • Use Force systems and resultants to combine forces and moments.

Formulas

  • M_O,z = x·F_y − y·F_x — Scalar 2D moment about O (k-component). x, y: m. F_x, F_y: N. M_O,z: N·m. Applies when forces lie in x–y plane.
  • M_axis = n̂ · (r × F) — Moment of a force about an axis with unit vector n̂. Outputs scalar N·m. Use in 3D or when asked “about z-axis,” use n̂ = k̂.
  • M_couple = F · d⊥ — Moment of a couple. F: magnitude of either force (N). d⊥: perpendicular distance between lines of action (m). N·m. Independent of reference point.
  • R = ΣF — Resultant force of a system. R: N.
  • M_O = Σ(r_i × F_i) — Resultant moment about O for a system of forces. N·m.
  • M_O' = M_O − r_O'O × R — Shift of moment from point O to a new point O'. r_O'O is the vector from O to O' (m). N·m.
  • Equivalent at O: {R = F, M_O = r_AO × F} — Moving a single force F from point A to O adds couple M_O. r_AO is vector from O to A (m). N·m.
  • Equivalent of couple anywhere: same M — A pure couple can be applied at any point with unchanged moment (free vector). N·m.

Worked examples

Example 1: 2D scalar moment of an inclined force about the origin Given: A force F = 200 N acts at point A with coordinates (x, y) = (3 m, 2 m). The force is inclined at 30° above the +x axis. Find the moment about O(0, 0). Use CCW positive.

Steps:

  1. Resolve the force:
    • Formula: F_x = F cos θ, F_y = F sin θ
    • Numbers: F_x = 200·cos 30° = 200·0.866025 ≈ 173.205 N F_y = 200·sin 30° = 200·0.5 = 100 N
  2. Use scalar 2D moment formula about O (k-component):
    • Formula: M_O,z = x·F_y − y·F_x
    • Numbers with units: M_O,z = (3 m)(100 N) − (2 m)(173.205 N) = 300 N·m − 346.41 N·m = −46.41 N·m
  3. Interpret sign: Negative means CW (with CCW positive).

Answer: The moment about O is −46.4 N·m (clockwise). Final magnitude: 46.4 N·m, CW.

Example 2: Moment of a force about the z-axis (3D vector method) Given: A force of magnitude 150 N acts along a line through point P(2 m, −1 m, 3 m) in the direction of vector v = (1, 2, −2). Find the moment about the z-axis through O.

Steps:

  1. Get the force vector from its direction:
    • Formula: F = F·(v/|v|)
    • Compute |v| = √(1² + 2² + (−2)²) = √(1 + 4 + 4) = 3
    • So F = 150·(1/3, 2/3, −2/3) = (50, 100, −100) N
  2. Position vector from origin to point of application:
    • r = (2, −1, 3) m
  3. Compute the moment vector about O:
    • Formula: M_O = r × F
    • Determinant (show components): i: (−1)(−100) − (3)(100) = 100 − 300 = −200 j: (2)(−100) − (3)(50) = −200 − 150 = −350; note the middle term sign in cross product gives +350 for j-component of r × F k: (2)(100) − (−1)(50) = 200 + 50 = 250
    • Therefore, M_O = (−200, 350, 250) N·m
  4. Component about z-axis:
    • Formula: M_z = n̂ · M_O with n̂ = k̂ = (0, 0, 1)
    • M_z = 0·(−200) + 0·(350) + 1·(250) = 250 N·m
  5. Sense: Positive about +z means CCW when viewed from +z.

Answer: The moment of the force about the z-axis is +250 N·m (counterclockwise as seen from +z).

Example 3: Couple moment and force–couple equivalence Part A: Pure couple Given: Two equal and opposite parallel forces of 400 N act on a lever arm with perpendicular separation d⊥ = 0.25 m. Find the couple moment and its nature.

Steps:

  1. Formula: M_couple = F · d⊥
  2. Numbers with units: M_couple = 400 N · 0.25 m = 100 N·m
  3. Nature: Net force is zero; moment is the same about any point (free vector). Sense depends on the directions of the forces; specify CW or CCW on the diagram.

Answer: The couple moment has magnitude 100 N·m; it is a free vector (sense as per given directions).

Part B: Replace a force at A by an equivalent at O plus a couple Given: A force F = 300 N acts at point A(4 m, −1 m, 0 m) along +y direction (so F = (0, 300, 0) N). Replace it by an equivalent system at the origin O.

Steps:

  1. Resultant force at O remains the same: R = F = (0, 300, 0) N
  2. Add a couple moment at O:
    • Formula: M_O = r_AO × F, with r_AO = (4, −1, 0) m
    • Cross product components: i: (−1)(0) − (0)(300) = 0 j: (4)(0) − (0)(0) = 0; sign in cross product gives 0 k: (4)(300) − (−1)(0) = 1200
    • Therefore, M_O = (0, 0, 1200) N·m

Answer: Equivalent at O is a force of 300 N along +y and a couple moment 1200 N·m along +z.

Common mistakes

  • Dropping units: Write N for forces and N·m for moments throughout. Do not write “m·N” casually in working; prefer N·m.
  • Confusing moment (vector) with work/energy (scalar). Both use N·m, but work is scalar (dot product F · s), while moment is vector (cross product r × F). They are not the same physical quantity.
  • Wrong r in cross product: r must go from the reference point O to a point on the force’s line of action. Using the reverse direction changes sign.
  • Forgetting that a couple has zero resultant force and is a free vector: You can move it without change.
  • Applying Varignon’s theorem with components about different points or axes. Components and the original force must be taken about the same point for the theorem.
  • For axis moments, forgetting to project onto the axis with n̂ · (r × F); just computing |r × F| is not enough when asked “about the z-axis.”

For your exam

  • Derivations/Proofs: Varignon’s theorem (vector proof), independence of couple moment from point, relation |M| = F d⊥ from r × F.
  • Diagrams: Neat, labeled lines of action, perpendicular distances, arrows for sense, axes for 3D questions. Mention CCW/CW sign.
  • Numericals: 2D/3D moments using components, moments about axes, equivalent force–couple reduction. Steps should include: diagram, choose sign convention, write formula before substituting numbers, keep units, box or bold the final answer with sense.
  • Mixed systems: Reduce multiple forces to R = ΣF and M_O = Σ(r × F). State if R and M_O are parallel or if the system reduces to a pure couple (R = 0) or a single resultant (M_O aligned with R).

Quick check

  1. A 250 N force acts at A(2 m, 3 m) making 90° with +x (i.e., along +y). What is M_O about the origin (CCW positive)?
  2. Two equal and opposite forces of 120 N are 0.15 m apart. What is the couple moment? Is it the same about any point?
  3. For F = (40, −20, 30) N acting at P with r = (1, 2, 0) m, find the moment about the x-axis.

Answers: 1) M_O = x·F_y − y·F_x = (2)(250) − (3)(0) = +500 N·m (CCW). 2) M = 120·0.15 = 18 N·m; yes, same about any point (free vector). 3) M_x = n̂_x · (r × F) with n̂_x = î; r × F = |i j k; 1 2 0; 40 −20 30| = i(2·30 − 0·(−20)) − j(1·30 − 0·40) + k(1·(−20) − 2·40) = (60) i − (30) j + (−100) k; so M_x = 60 N·m.

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?