Civil Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Curvilinear motion: rectangular, normal and tangential components

Curvilinear motion of a particle resolved using rectangular (x–y–z) components and path-based normal–tangential components, with definitions, derivations, formulas, and worked examples.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Curvilinear motion is motion along a curved path—common in vehicle cornering, cam–follower mechanisms, conveyor bends, roller-coasters, and robotic end-effectors. Engineers resolve velocity and acceleration into convenient components to analyze loads, safety, and control: Cartesian (rectangular) components for coordinate-based problems, and normal–tangential components for path-based insight (speed change vs path curvature).

Key ideas

  1. Rectangular (Cartesian) components along fixed, mutually perpendicular axes.
  2. Normal–tangential components attached to the instantaneous path of the particle.
  • Position, velocity, acceleration in rectangular form:

    • Position vector r(t): The vector from an origin to the particle: r(t) = x(t) i + y(t) j + z(t) k.
    • Velocity v(t): The time derivative of position: v = dr/dt. Components: v_x = dx/dt, v_y = dy/dt, v_z = dz/dt. The scalar speed is v = |v|.
    • Acceleration a(t): The time derivative of velocity: a = dv/dt = d²r/dt². Components: a_x = d²x/dt², etc.
  • Path-based description:

    • Arc length s: Distance measured along the path from a reference point. Rate of change of arc length is the speed: ds/dt = v.
    • Unit tangent T: A unit vector tangent to the path in the direction of motion: T = v/|v|.
    • Unit normal N: A unit vector perpendicular to T in the osculating plane, pointing toward the center of curvature (toward the concave side of the path).
    • Radius of curvature ρ: The radius of the osculating circle at a point on the path; curvature κ = 1/ρ. Intuitively, tighter curves have smaller ρ (larger κ).
  • Exact theorem (acceleration decomposition in N–T):

    • Statement: For planar curvilinear motion, the acceleration vector can be decomposed as a = (dv/dt) T + (v²/ρ) N. Here (dv/dt) is the tangential acceleration a_t (change of speed along the path) and (v²/ρ) is the normal acceleration a_n (change of direction toward the center of curvature). Assumptions: path is smooth (T is differentiable), ρ ≠ 0 at the point considered.
  • Derivation of a = (dv/dt) T + (v²/ρ) N (step-by-step):

    1. v = dr/dt. Write v = v T, where v = |v| and T is the unit tangent.
    2. Differentiate: a = dv/dt = d(v T)/dt = (dv/dt) T + v (dT/dt).
    3. Use the Frenet relation dT/ds = (1/ρ) N. By chain rule, dT/dt = (dT/ds)(ds/dt) = (1/ρ) N (ds/dt) = (v/ρ) N.
    4. Substitute: a = (dv/dt) T + v (v/ρ) N = (dv/dt) T + (v²/ρ) N. The scalar components are a_t = dv/dt and a_n = v²/ρ.
  • Radius of curvature formulas (planar path):

    • Path given as y(x): ρ = [1 + (dy/dx)²]^{3/2} / |d²y/dx²|.
    • Parametric x(t), y(t): ρ = [ (ẋ² + ẏ²)^{3/2} ] / | ẋ ÿ − ẏ ẍ |.
    • Angle form: If ψ is the angle of T with the x-axis, curvature κ = dψ/ds, so ρ = 1/κ.
  • Direction conventions and diagrams to draw in an exam:

    • Rectangular components diagram: Draw x- and y-axes. Mark the particle at point P(x, y). Draw velocity components v_x along +x and v_y along +y; show resultant v as their vector sum. Similarly, draw acceleration components a_x, a_y, and resultant a. If a component is negative, reverse its arrow relative to the positive axis and/or label the value with its sign.
    • Normal–tangential diagram: Sketch the path through P. Draw the tangent line at P and place the unit tangent T along the direction of motion. Draw the principal normal N perpendicular to T, pointing toward the center of curvature C. Indicate ρ as distance PC. Resolve a into a_t along T (positive if increasing speed) and a_n along N (always toward C for a positive a_n = v²/ρ). Label all vectors and angles.
  • Special case: Circular motion of radius r (constant). Then ρ = r, a_n = v²/r = r ω² and a_t = dv/dt = r α, where ω = dθ/dt and α = dω/dt.

  • Connections to other topics: Use Newton’s second law (from Kinetics) with these components to compute forces causing a_t (tangential net force) and a_n (inward net force). For projectile motion, rectangular components are typically used; at the apex, a is purely vertical (gravity) though N–T directions vary along the path.

Formulas

Position vector; x, y, z in m; i, j, k are unit vectors along axes. Applies to any 3D motion.

  • v = dr/dt = ẋ i + ẏ j + ż k Velocity vector; ẋ = dx/dt, etc., in m/s. General.

  • a = dv/dt = d²r/dt² = ẍ i + ÿ j + ẑ k Acceleration vector; ẍ = d²x/dt², etc., in m/s². General.

  • v = |v| = √(ẋ² + ẏ² + ż²) Speed (scalar) in m/s. General. Also, ds/dt = v (s in m).

  • T = v/|v| Unit tangent (dimensionless). Defined when v ≠ 0.

  • a = a_t T + a_n N Acceleration decomposition; a_t in m/s² along T; a_n in m/s² along N. Planar motion.

  • a_t = dv/dt Tangential acceleration (rate of change of speed), in m/s².

  • a_n = v²/ρ Normal (centripetal) acceleration magnitude, in m/s²; ρ in m.

  • dT/ds = (1/ρ) N Frenet relation for planar smooth curve; κ = 1/ρ in 1/m.

  • dT/dt = (v/ρ) N Time derivative of T; v in m/s, ρ in m.

  • ρ = [1 + (dy/dx)²]^{3/2} / |d²y/dx²| Radius of curvature for a plane curve y(x); x, y in m, ρ in m.

  • ρ = [ (ẋ² + ẏ²)^{3/2} ] / | ẋ ÿ − ẏ ẍ | Radius of curvature for parametric x(t), y(t); dots are time derivatives; ρ in m.

  • κ = dψ/ds, ρ = 1/κ Curvature κ in 1/m; ψ is tangent angle; s is arc length in m.

  • Special circular motion:

    • a_n = v²/r = r ω² r in m; v in m/s; ω in rad/s; a_n in m/s².
    • a_t = r α α in rad/s²; a_t in m/s².

Worked examples

Example 1: Rectangular to N–T components for a parametric path Given: x(t) = 2 t² m, y(t) = 3 t + 4 m, z = 0. Find at t = 2.0 s: position, velocity, speed, acceleration vector, a_t, a_n, ρ, and N.

  1. Position:

    • x = 2(2)² = 8 m, y = 3(2) + 4 = 10 m.
  2. Velocity:

    • ẋ = d(2 t²)/dt = 4 t → 4(2) = 8 m/s
    • ẏ = d(3 t)/dt = 3 m/s
    • v = 8 i + 3 j (m/s); speed v = √(8² + 3²) = √73 = 8.544 m/s
  3. Acceleration:

    • ẍ = d(4 t)/dt = 4 m/s²; ÿ = d(3)/dt = 0
    • a = 4 i + 0 j (m/s²); |a| = 4.000 m/s²
  4. Tangential acceleration a_t:

    • Formula: a_t = (v · a)/|v|
    • Compute: v · a = (8)(4) + (3)(0) = 32 (m²/s³); a_t = 32 / 8.544 = 3.746 m/s²
  5. Normal acceleration a_n:

    • Formula: a_n = √(|a|² − a_t²)
    • Compute: a_n = √(4.000² − 3.746²) = √(16.000 − 14.030) = √1.970 = 1.404 m/s²
  6. Radius of curvature ρ:

    • Formula: ρ = v²/a_n
    • Compute: ρ = (8.544)² / 1.404 = 73.00 / 1.404 = 52.0 m
  7. Unit tangent T and unit normal N (directions):

    • T = v/|v| = (8/8.544) i + (3/8.544) j = 0.936 i + 0.351 j
    • a_t T = 3.746(0.936 i + 0.351 j) = 3.505 i + 1.316 j (m/s²)
    • Normal component vector: a_n N = a − a_t T = (4 − 3.505) i + (0 − 1.316) j = 0.495 i − 1.316 j (m/s²)
    • N = (a_n N)/a_n = (0.495/1.404) i + (−1.316/1.404) j = 0.353 i − 0.938 j

Answer: At t = 2 s: v = 8 i + 3 j m/s (speed 8.544 m/s), a = 4 i m/s², a_t = 3.746 m/s², a_n = 1.404 m/s², ρ = 52.0 m, N = 0.353 i − 0.938 j.

Example 2: Car on a circular track with increasing speed A car moves on a circular track of radius r = 100 m. Its speed varies as v(t) = 20 + 0.5 t (m/s). Find the tangential acceleration, normal acceleration, magnitude of total acceleration, and the angle of acceleration from the tangent at t = 10 s.

  1. Data at t = 10 s: v = 20 + 0.5(10) = 25 m/s; dv/dt = 0.5 m/s².

  2. Tangential acceleration:

    • Formula: a_t = dv/dt = 0.5 m/s².
  3. Normal acceleration:

    • Formula: a_n = v²/r = 25²/100 = 625/100 = 6.25 m/s².
  4. Total acceleration magnitude:

    • Formula: |a| = √(a_t² + a_n²) = √(0.5² + 6.25²) = √(0.25 + 39.0625) = √39.3125 = 6.27 m/s².
  5. Direction relative to tangent:

    • Angle from T toward N: θ = tan⁻¹(a_n/a_t) = tan⁻¹(6.25/0.5) = tan⁻¹(12.5) = 85.4°.

Answer: a_t = 0.5 m/s², a_n = 6.25 m/s², |a| = 6.27 m/s², acceleration is at 85.4° inward from the tangent.

Example 3: Radius of curvature from y(x); normal acceleration A particle moves along y = x²/40 (x, y in m). At x = 10 m, its speed is v = 15 m/s. Find the radius of curvature ρ, the normal acceleration a_n, and state the direction of N.

  1. Compute derivatives:

    • y' = dy/dx = (2x)/40 = x/20; at x = 10: y' = 10/20 = 0.5 (dimensionless).
    • y'' = d²y/dx² = 2/40 = 0.05 1/m.
  2. Radius of curvature:

    • Formula: ρ = [1 + (y')²]^{3/2} / |y''|.
    • Compute numerator: 1 + (0.5)² = 1.25; (1.25)^{3/2} = 1.3975.
    • ρ = 1.3975 / 0.05 = 27.95 m.
  3. Normal acceleration:

    • Formula: a_n = v²/ρ = 15² / 27.95 = 225 / 27.95 = 8.05 m/s².
  4. Direction of N:

    • Since y'' > 0, the curve is concave upward; N points toward the center of curvature on the concave side (upward). If motion is in +x, T is forward along the path with slope ~0.5; N is perpendicular to T, pointing largely upward.

Answer: ρ = 27.95 m, a_n = 8.05 m/s², N points toward the concave (upward) side of the path.

Common mistakes

  • Forgetting that a_t = dv/dt equals the signed tangential component of acceleration: a_t = a · T = (v · a)/|v|. Use the dot product to get the correct sign.
  • Algebra/sign errors when computing ρ from y(x): Missing the absolute value on y'' or misapplying the exponent (the 3/2 power).
  • Unit mistakes: Treating curvature κ as having units of m instead of 1/m; forgetting that ψ is in radians in κ = dψ/ds.
  • Confusing gravitational acceleration g with normal acceleration: a_n is not g unless motion specifically implies it (e.g., vertical circular motion force balance), and directions differ.

For your exam

  • Formulas for ρ: Derive ρ = [1 + (y')²]^{3/2}/|y''| or state and apply the parametric form. Define all symbols and units.
  • Numericals: Given x(t), y(t), find v, a, a_t, a_n, ρ at a time; or for circular motion, compute a_t, a_n, and the direction of a.
  • Diagrams: Draw and label T, N, ρ, a_t, a_n at a point on a curve; or show rectangular components of v and a.
  • What full-marks answers include:
    • Clear statement of definitions/laws with assumptions (smooth path, v ≠ 0, etc.).
    • Correct formulas with symbols defined and SI units.
    • Steps shown: formula first, then numbers with units, neat final answer with appropriate significant figures.
    • Properly labeled sketches as described; directions of T and N indicated.
    • If using vectors, show dot products when finding a_t and vector resolution to find N.

Quick check

  1. A particle moves with speed v = 12 m/s on a path with ρ = 30 m. What is a_n? Direction?
  2. For y = 5x² (x, y in m), find ρ at x = 0.5 m.
  3. Given v = 6 i + 8 j m/s and a = −3 i + 4 j m/s² at an instant, find a_t.

Answers: (1) a_n = v²/ρ = 144/30 = 4.8 m/s² inward toward the center of curvature. (2) y' = 10x = 5, y'' = 10 m⁻¹ ⇒ ρ = [1 + 25]^{3/2}/10 = 26^{3/2}/10 = (26√26)/10 ≈ 13.3 m. (3) a_t = (v · a)/|v| = [6(−3) + 8(4)]/√(6² + 8²) = (−18 + 32)/10 = 14/10 = 1.4 m/s².

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?