1. Unit 1: Aesthetic, Ergonomic and System-Level Design Considerations

    6 hours

    Form and function, design for appearance, colour codes and visual ergonomics, the human–machine interface, displays and controls, ergonomics in mechanical systems; optimum and adequate design.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Industrial design and aesthetics
    • Displays and controls
    • Ergonomics: scope and the man–machine system
    • Optimum design
  2. Unit 2: Design of Pressure Vessels

    7 hours

    Thin and thick vessels, failure theories, Lamé's, Clavarino's and Birnie's equations, compound cylinders and autofrettage; classification and IS-code design of shells, heads, openings, nozzles and supports.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Thin and thick cylinders
    • Thick cylinders under internal and external pressure
    • Compound cylinders and autofrettage
    • Pressure vessel shells, heads, openings and supports
  3. Unit 3: Design of Brakes and Clutch Systems

    7 hours

    Band, internal expanding shoe and external contracting brakes, thermal analysis and brake rating; single- and multi-plate, cone and centrifugal clutches, torque capacity and materials.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Band and shoe brakes
    • Friction clutches
    • Cone and centrifugal clutches
  4. Unit 4: Design of Machine Tool Gearboxes

    6 hours

    Speed range and its graphical representation, structure, deviation and ray diagrams, the optimum ray diagram, tooth number progression; design of multi-speed machine tool gearboxes.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Stepped speed regulation and geometric progression
    • Ray diagrams and structural formulae for gearboxes
    • Design of speed gearboxes
    • Numbers of teeth in machine tool gearboxes
  5. Unit 5: Design of I.C. Engine Components

    6 hours

    Materials for engine components; cylinder, head and liners; piston, pin and rings; connecting rod; crankshaft and crank pin; fatigue and manufacturability.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Design of cylinder and cylinder head
    • Design of piston, pin and rings
    • Design of connecting rod
    • Design of crankshaft and bearings
  6. Unit 6: AI and ML Applications in Mechanical System Design

    8 hours

    Data-driven design, ML concepts for engineers, AI-assisted design optimisation, regression and classification models.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Linear regression for performance prediction
    • Model evaluation: error, accuracy and overfitting

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.