Mechanical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Mechanical Engineering (University)

Process Equipment Design

Process design, piping, pressure and tall vessels, process equipment and control, fabrication.

Interview questions
Notes for Process Equipment Design are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Process Equipment Design

  1. Process design basics· notes coming
  2. Design pressure, stress and corrosion allowance· notes coming
  3. Optimisation in process design· notes coming
  4. Thin and thick cylinders· notes coming
  5. Piping codes and layouts· notes coming
  6. Design of cylindrical and spherical vessels· notes coming
  7. End closures and opening compensation· notes coming
  8. Flange design· notes coming
  9. Tall vessels under wind and seismic loads· notes coming
  10. Storage and reaction vessels· notes coming
  11. Agitators and mixers· notes coming
  12. Valves, expansion joints and pipe supports· notes coming
  13. Process parameters and their correlations· notes coming
  14. Process measurement and control· notes coming
  15. Fabrication and inspection of process equipment· notes coming
  16. Applications of process equipment design· notes coming