Mechanical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Mechanical Engineering (University)

Transmission System Design

Spur, helical, bevel and worm gears, bearings, clutches and brakes, hybrid vehicle transmissions.

Interview questions
Notes for Transmission System Design are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Transmission System Design

  1. Gear materials and modes of tooth failure· notes coming
  2. Spur gear force analysis· notes coming
  3. Beam strength: the Lewis equation· notes coming
  4. Wear strength and dynamic load: Buckingham's equation· notes coming
  5. Design of spur gears· notes coming
  6. Design of helical gears· notes coming
  7. Straight bevel gears· notes coming
  8. Worm gear terminology and force analysis· notes coming
  9. Worm gear efficiency and thermal rating· notes coming
  10. Hydrodynamic sliding bearings· notes coming
  11. Types of rolling contact bearings· notes coming
  12. Static and dynamic load capacity· notes coming
  13. Equivalent load and bearing life· notes coming
  14. Selecting bearings from a catalogue· notes coming
  15. Friction clutches· notes coming
  16. Cone and centrifugal clutches· notes coming
  17. Band and shoe brakes· notes coming
  18. Disc brakes· notes coming
  19. Hybrid electric vehicle architectures· notes coming
  20. Power-split devices· notes coming
  21. HEV components and sizing· notes coming
  22. HEV power management· notes coming
  23. Types of gear trains· notes coming
  24. Design of flat belt drives· notes coming
  25. Selecting V-belts from catalogues· notes coming
  26. Design of wire ropes· notes coming
  27. Design of chain drives· notes coming
  28. Bearing life for cyclic loads and reliability other than 90%· notes coming
  29. Synchronous (toothed) belt drives· notes coming
  30. Design of flywheels: rim stresses and dimensions· notes coming