SGBAU · Second Year B.E. Mechanical Engineering · NEP 2020
Material Science
4ME209PC · Semester IV · 3 credits · IE 40 + ESE 60
Unit 1: Introduction to Metallurgy
6 hoursProcess, physical and mechanical metallurgy; classification of materials; structure of metals and alloys, solid solutions, the lever rule, and solidification by nucleation and growth.
Examined in the 60-mark end-semester paper
- Classification of engineering materials
- Solid solutions and Hume-Rothery rules
- Gibbs' phase rule and the lever rule
- Nucleation and growth
- Solidification of metals and alloys
Unit 2: Phase Diagrams
6 hoursBinary equilibrium diagrams and invariant reactions, construction of the iron–carbon diagram and its critical temperatures, and an introduction to composite materials.
Examined in the 60-mark end-semester paper
- Cooling curves and phase diagrams
- Isomorphous, eutectic and peritectic systems
- Iron–carbon equilibrium diagram
- Composite materials: matrices, reinforcements and fabrication
Unit 3: Alloy Steels
6 hoursPurpose of alloying and classification of alloy steels, the effect of alloying elements on the eutectoid and the S-curve, and ferritic, austenitic and martensitic stainless steels.
Examined in the 60-mark end-semester paper
- Alloy steels and alloying elements
- Plain carbon steels
- Stainless steels and tool steels
Unit 4: Cast Irons and Non-Ferrous Alloys
6 hoursWhite, grey, nodular and malleable cast irons; brasses and bronzes, duralumin, pewter and zinc alloys; precipitation hardening and season cracking.
Examined in the 60-mark end-semester paper
- Cast irons
- Copper and its alloys
- Aluminium alloys and age hardening
- Nickel, titanium and bearing alloys
- Season cracking and stress corrosion of brasses
Unit 5: Heat Treatment of Steels
6 hoursAnnealing, normalising, hardening and tempering, isothermal transformation (S-curve) diagrams, quenching media and severity of quench, and austempering, martempering and patenting.
Examined in the 60-mark end-semester paper
- Annealing and normalising
- Hardening, tempering and hardenability
- TTT and CCT diagrams
- Hardenability and its tests
- Austempering, martempering and sub-zero treatment
Unit 6: Surface Hardening and Powder Metallurgy
6 hoursCarburising, nitriding, cyaniding, flame and induction hardening; hot and cold working, work hardening, strain ageing, recovery, recrystallisation and grain growth; powder metallurgy.
Examined in the 60-mark end-semester paper
- Surface hardening
- Cold working and strain hardening
- Recrystallisation annealing
- Hot working
- Powder metallurgy: compaction and sintering
Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).