Mechanical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Mechanical Engineering (University)

Engineering Materials & Metallurgy

Crystal structures, testing, the iron–carbon diagram, heat treatment, steels, cast irons and alloys.

Interview questions
Notes for Engineering Materials & Metallurgy are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Engineering Materials & Metallurgy

  1. Crystal structures and Miller indices· notes coming
  2. Crystal imperfections and diffusion· notes coming
  3. Destructive testing of materials· notes coming
  4. Non-destructive testing· notes coming
  5. Microscopy and X-ray diffraction· notes coming
  6. Macroscopic examination· notes coming
  7. Solid solutions and Hume-Rothery rules· notes coming
  8. Solidification of metals and alloys· notes coming
  9. Cooling curves and phase diagrams· notes coming
  10. Gibbs' phase rule and the lever rule· notes coming
  11. Iron–carbon equilibrium diagram· notes coming
  12. TTT and CCT diagrams· notes coming
  13. Annealing and normalising· notes coming
  14. Hardening, tempering and hardenability· notes coming
  15. Austempering, martempering and sub-zero treatment· notes coming
  16. Surface hardening· notes coming
  17. Plain carbon steels· notes coming
  18. Alloy steels and alloying elements· notes coming
  19. Stainless steels and tool steels· notes coming
  20. Designation of steels: IS, AISI and SAE· notes coming
  21. Cast irons· notes coming
  22. Copper and its alloys· notes coming
  23. Aluminium alloys and age hardening· notes coming
  24. Nickel, titanium and bearing alloys· notes coming
  25. Materials for additive manufacturing· notes coming
  26. Classification of engineering materials· notes coming
  27. Dislocations, slip systems and critical resolved shear stress· notes coming
  28. Cold working and strain hardening· notes coming
  29. Recrystallisation annealing· notes coming
  30. Hot working· notes coming
  31. Nucleation and growth· notes coming
  32. Isomorphous, eutectic and peritectic systems· notes coming
  33. Hypo- and hyper-eutectoid steels· notes coming
  34. Hardenability and its tests· notes coming
  35. Maraging and ausformed steels· notes coming
  36. Ductile and brittle fracture· notes coming
  37. Griffith's criterion and DBTT· notes coming
  38. Fatigue and S–N curves· notes coming
  39. Creep and creep testing· notes coming
  40. Mechanical properties of materials· notes coming
  41. Strengthening mechanisms: grain size, solid solution and particles· notes coming
  42. Sensitisation and weld decay in stainless steels· notes coming
  43. Magnesium alloys· notes coming
  44. Ceramics and glasses· notes coming
  45. Composite materials: matrices, reinforcements and fabrication· notes coming
  46. Nanomaterials and nanotechnology· notes coming
  47. Superalloys and high-temperature materials· notes coming
  48. Metallic glasses and rapid solidification· notes coming
  49. Heat treatment of high-speed steel and secondary hardening· notes coming
  50. Season cracking and stress corrosion of brasses· notes coming
  51. Interatomic bonding in materials· notes coming
  52. Thermal analysis: DTA, DSC, TGA and dilatometry· notes coming
  53. Failure analysis: types, causes and investigation of failures· notes coming
  54. Fracture mechanics: stress intensity factor and fracture toughness· notes coming
  55. Corrosion, stress corrosion cracking and hydrogen embrittlement· notes coming