SGBAU · Second Year B.E. Mechanical Engineering · NEP 2020
Manufacturing Technology
3ME201PC · Semester III · 3 credits · IE 40 + ESE 60
Unit 1: Casting
Patterns, pattern materials and allowances, cores, moulding sands and moulding, the gating system, melting furnaces, permanent-mould, die, centrifugal and investment casting, and casting defects.
Examined in the 60-mark end-semester paper
- Patterns and pattern allowances
- Moulding sand and cores
- Gating system and mould filling time
- Melting furnaces: cupola, crucible, arc and induction
- Special casting processes
- Casting defects and remedies
Unit 2: Joining Processes
Mechanical fastening, riveting, soldering and brazing; arc and gas welding, electrodes and fluxes, TIG and MIG, and friction, ultrasonic, thermit and spot welding; welding defects.
Examined in the 60-mark end-semester paper
- Adhesive bonding and mechanical fastening
- Soldering, brazing and weld joints
- Arc welding: MIG and TIG
- Gas welding and flames
- Resistance welding
- Solid-state and modern welding processes
- Welding defects and inspection
Unit 3: Mechanical Working of Metals
Hot and cold working; extrusion, piercing and seamless tube production, shearing, tube and wire drawing, spinning, embossing, coining and bending, swaging, forging and rolling mills.
Examined in the 60-mark end-semester paper
- Fundamentals of metal forming
- Extrusion, wire and tube drawing
- Sheet metal operations and presses
- Forging and forging load
- Rolling and rolling load
Unit 4: Metal Cutting and the Lathe
Mechanics of metal cutting and chip formation, tool materials and geometry, tool life and failure, Merchant's force circle; the lathe, its accessories and operations including taper turning and thread cutting.
Examined in the 60-mark end-semester paper
- Chip formation and types of chips
- Merchant's theory and cutting forces
- Cutting tool materials and tool signature
- Single-point cutting tool geometry
- Tool wear and Taylor's tool life equation
- Lathe and milling operations
Unit 5: Drilling, Milling, Broaching and Boring
Drilling machines and twist-drill nomenclature; milling machines and cutters, types of milling, the dividing head with compound and differential indexing; broaching and boring.
Examined in the 60-mark end-semester paper
- Drilling, shaping and broaching machines
- Boring, reaming and tapping
- Gear milling and indexing
Unit 6: Grinding and Finishing
Grinding wheels — marking, selection and mounting — and grinding machines; honing, lapping, super-finishing, buffing and burnishing.
Examined in the 60-mark end-semester paper
- Grinding wheels: designation and selection
- Grinding machines and processes
- Honing and lapping
- Advanced fine finishing processes
Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).