RTMNU TY Mechanical syllabus

RTMNU · Third Year B.Tech Mechanical Engineering · NEP 2020

Dynamics of Machines

BME6T20 · Semester VI · 2 credits · College 30 + university 70

  1. Unit 1: Gyroscopic Effect

    7 hours

    Precession, the gyroscopic couple and its effect on shaft bearings, aeroplanes, ships and vehicle stability, and electronic gyroscopes in modern automobiles.

    Examined in the 70-mark end-semester paper

    • Gyroscopic couple
    • Gyroscopic effect on aeroplanes and ships
    • Stability of four-wheel and two-wheel vehicles
  2. Unit 2: Dynamic Force Analysis

    7 hours

    D'Alembert's principle, static and dynamic force analysis of four-bar and reciprocating mechanisms by graphical and analytical methods, and cam dynamics and jump.

    Examined in the 70-mark end-semester paper

    • Virtual work and D'Alembert's principle
    • Dynamic force analysis of four-bar and slider-crank mechanisms
    • Klein's construction
    • Pressure angle, undercutting and jump
  3. Unit 3: Balancing and Flywheels

    7 hours

    Static and dynamic balancing of rotating masses in one and several planes and balancing machines; primary and secondary balancing of single- and multi-cylinder engines; turning-moment diagrams and flywheels, including punching presses.

    Examined in the 70-mark end-semester paper

    • Static and dynamic balancing
    • Balancing rotating masses in several planes
    • Primary and secondary balancing
    • Balancing multi-cylinder engines
    • Turning moment diagrams and flywheels
  4. Unit 4: Vibration Analysis

    7 hours

    Types of vibration and degrees of freedom, undamped and damped free and forced vibration, damping, logarithmic decrement, magnification factor, isolation and transmissibility; whirling and critical speeds, torsional vibration of two- and three-rotor and geared systems.

    Examined in the 70-mark end-semester paper

    • Undamped free vibration
    • Damped free vibration and logarithmic decrement
    • Forced vibration and frequency response
    • Transmissibility and vibration isolation
    • Critical speed of shafts
    • Torsional vibration of single and two-rotor systems
    • Torsional vibration of geared systems

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).