Mechanical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Mechanical Engineering (University)

Dynamics of Machinery

Balancing, gyroscope, free and forced vibration, two-degree-of-freedom systems, vibration and noise control.

Interview questions
Notes for Dynamics of Machinery are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Dynamics of Machinery

  1. Static and dynamic balancing· notes coming
  2. Balancing rotating masses in several planes· notes coming
  3. Primary and secondary balancing· notes coming
  4. Balancing multi-cylinder engines· notes coming
  5. Direct and reverse crank method· notes coming
  6. Gyroscopic couple· notes coming
  7. Gyroscopic effect on aeroplanes and ships· notes coming
  8. Stability of four-wheel and two-wheel vehicles· notes coming
  9. Modelling vibratory systems· notes coming
  10. Equivalent stiffness and damping· notes coming
  11. Equations of motion: Newton and energy methods· notes coming
  12. Undamped free vibration· notes coming
  13. Damped free vibration and logarithmic decrement· notes coming
  14. Forced vibration and frequency response· notes coming
  15. Rotating and reciprocating unbalance· notes coming
  16. Base excitation· notes coming
  17. Transmissibility and vibration isolation· notes coming
  18. Critical speed of shafts· notes coming
  19. Two degree of freedom systems· notes coming
  20. Natural frequencies and mode shapes· notes coming
  21. Matrix method for eigenvalues· notes coming
  22. Torsional vibration of geared systems· notes coming
  23. Vibration measuring instruments· notes coming
  24. Vibration-based condition monitoring· notes coming
  25. Vibration control and dynamic absorbers· notes coming
  26. Noise measurement and control· notes coming
  27. Dynamic force analysis of four-bar and slider-crank mechanisms· notes coming
  28. Static force analysis of mechanisms· notes coming