RTMNU · Third Year B.Tech Mechanical Engineering · NEP 2020
Design of Machine Element
BME6T19 · Semester VI · 2 credits · College 30 + university 70
Unit 1: Design Basics; Cotter and Knuckle Joints
7 hoursDesign methods, aesthetic and ergonomic considerations, materials and manufacturing in design, castings and forgings, modes of failure, factor of safety and design stresses, theories of failure, standards, codes and preferred numbers; cotter and knuckle joints under static load.
Examined in the 70-mark end-semester paper
- The machine design process
- Material selection and factor of safety
- Theories of failure in design
- Cotter and knuckle joints
Unit 2: Joints, Power Screws and Pressure Vessels
7 hoursRiveted joints and bolted and welded joints under axial and eccentric loads; thread forms, multi-start screws and the design of a screw jack; pressure vessels, Lamé's equation, cylindrical vessels and their bolts, gaskets and covers.
Examined in the 70-mark end-semester paper
- Design of riveted joints, including eccentric loading
- Threaded fasteners and bolts of uniform strength
- Eccentrically loaded bolted joints
- Strength of welded joints
- Eccentrically loaded welded joints
- Power screw terminology and torque
- Design of a screw jack
- Thin and thick cylinders
Unit 3: Shafts, Couplings and Springs
7 hoursShafts for power transmission under static and fatigue criteria, the ASME code and keys; rigid flange and bush-pin flexible couplings; spring materials, helical compression and tension springs under static and variable loads, and leaf springs.
Examined in the 70-mark end-semester paper
- Design of shafts for strength
- Design of shafts for rigidity and the ASME code
- Design of keys and splines
- Design of flange couplings
- Bushed-pin flexible couplings
- Design of helical springs
- Leaf springs and nipping
Unit 4: Fluctuating Loads, Curved Beams, Clutches and Brakes
7 hoursReversed, repeated and fluctuating stresses, fatigue, stress concentration, endurance limit, finite and infinite life and the Soderberg and Goodman criteria; curved beams such as crane hooks; single- and multi-plate clutches by uniform wear and uniform pressure, shoe and band brakes.
Examined in the 70-mark end-semester paper
- Fatigue, S–N curve and endurance limit
- Stress concentration
- Soderberg, Goodman and Gerber criteria
- Finite life and cumulative damage
- Pure bending of curved beams
- Friction clutches
- Band and shoe brakes
Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).