RTMNU SY Mechanical syllabus

RTMNU · Second Year B.Tech Mechanical Engineering · NEP 2020

Manufacturing and Machining Processes

BME4T12 · Semester IV · 3 credits · College 30 + university 70

  1. Unit 1: Casting, Metal Forming and Plastics

    9 hours

    Patterns and allowances, cores, moulding sands, gating design, melting furnaces including the cupola, and casting defects; rolling, forging, extrusion and drawing; properties and types of plastics and their shaping by extrusion, injection, blow, compression and transfer moulding, embossing and calendering.

    Examined in the 70-mark end-semester paper

    • Patterns and pattern allowances
    • Moulding sand and cores
    • Gating system and mould filling time
    • Melting furnaces: cupola, crucible, arc and induction
    • Casting defects and remedies
    • Rolling and rolling load
    • Forging and forging load
    • Extrusion, wire and tube drawing
    • Thermoplastics and thermosetting plastics
    • Polymer moulding processes
  2. Unit 2: Joining Processes

    9 hours

    Types of welding; arc and gas welding, electrodes, resistance, spot, TIG and MIG welding, and the defects and inspection of welds; joining plastics by fastening, spin, ultrasonic, induction, dielectric, hot-plate, vibration and hot-gas welding and solvent bonding.

    Examined in the 70-mark end-semester paper

    • Arc welding: MIG and TIG
    • Gas welding and flames
    • Resistance welding
    • Welding defects and inspection
    • Joining of plastics
  3. Unit 3: Theory of Metal Cutting

    9 hours

    Tool materials and the geometry of a single-point cutting tool; orthogonal and oblique cutting, mechanics of metal cutting, chip formation, cutting fluids, cutting speed, feed and depth of cut, and tool life.

    Examined in the 70-mark end-semester paper

    • Cutting tool materials and tool signature
    • Single-point cutting tool geometry
    • Orthogonal and oblique cutting
    • Merchant's theory and cutting forces
    • Chip formation and types of chips
    • Machinability and cutting fluids
    • Tool wear and Taylor's tool life equation
  4. Unit 4: Lathe, Shaper, Planer and Milling

    9 hours

    The lathe — construction, attachments, specifications and turning operations, capstan and turret lathes; the shaper and planer with the quick-return mechanism; column-and-knee milling machines, milling operations and cutters, and simple and compound indexing.

    Examined in the 70-mark end-semester paper

    • Lathe and milling operations
    • Capstan and turret lathes
    • Drilling, shaping and broaching machines
    • Gear milling and indexing
    • Machining time calculations
  5. Unit 5: Drilling, Grinding and Finishing

    9 hours

    Drills and drilling machines, reaming; grinding wheels and their selection, cylindrical and centreless grinding; honing, lapping, superfinishing, polishing, buffing, metal spraying, galvanising and electroplating.

    Examined in the 70-mark end-semester paper

    • Boring, reaming and tapping
    • Grinding wheels: designation and selection
    • Grinding machines and processes
    • Honing and lapping
    • Electroplating

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).