PAHSU TY Mechanical syllabus

PAHSU · Third Year B.Tech. Mechanical Engineering · NEP 2020

Tool Engineering

MECHPEC-02B · Programme Elective II · Semester VI · 4 credits · ISE 30 + ESE 70

One of the Programme Elective II options.

  1. Unit 1: Basics of Tool Engineering

    8 hours

    Single-point tool geometry and signature (ASA and ORS) and its effect on tool life, force and finish; orthogonal and oblique cutting, chips, chip thickness ratio, shear angle, dynamometers and the Merchant circle; drills, milling cutters, broaches and reamers; cutting tool materials.

    Examined in the 70-mark end-semester paper

    • Single-point cutting tool geometry
    • Cutting tool materials and tool signature
    • Mechanics of orthogonal and oblique cutting
    • Merchant's theory and cutting forces
    • Multipoint cutting tools
  2. Unit 2: Machinability and Tool Life

    4 hours

    Machinability index and the factors affecting it; flank and crater wear and Taylor's tool life equation; heat generation and coolants.

    Examined in the 70-mark end-semester paper

    • Tool wear, tool life and machinability
    • Machinability and cutting fluids
  3. Unit 3: Press Tools

    8 hours

    Elements of press tools, types of die and operation; cutting dies: shearing, cutting force, clearance, strip layout, punches and die block; centre of pressure and die-set and press selection; drawing dies: blank size, number of draws, radii, clearance and force; bending dies.

    Examined in the 70-mark end-semester paper

    • Press working equipment and die components
    • Strip layout and design of blanking and piercing dies
    • Drawing dies: blank size and number of draws
    • Bending dies, bend allowance and springback
  4. Unit 4: Locating and Clamping Devices

    8 hours

    Locating and clamping concepts and devices; redundant location; fool-proofing and indexing.

    Examined in the 70-mark end-semester paper

    • The 3-2-1 principle and location
    • Clamping principles and devices
  5. Unit 5: Design of Jigs and Fixtures

    8 hours

    Principles, types and uses of jigs, bushes and their selection, standard parts, design procedure and drawing; principles and elements of fixtures and the design of milling fixtures.

    Examined in the 70-mark end-semester paper

    • Types of jigs and drill bushes
    • Types of fixtures
    • Designing a simple jig or fixture
  6. Unit 6: Economics of Tooling

    4 hours

    Elements of cost and depreciation; total cost and selling price; break-even analysis for equipment selection; economics of small tools and equipment replacement; economic order quantity for batch production.

    Examined in the 70-mark end-semester paper

    • Depreciation methods
    • Break-even analysis
    • Inventory costs and EOQ

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).