PAHSU · Third Year B.Tech. Mechanical Engineering · NEP 2020
Metallurgy
MECHPCC-09 · Semester V · 4 credits · ISE 30 + ESE 70
Unit 1: Introduction to Ferrous Alloys
6 hoursClassification of metals; the phase rule; solid solutions and intermetallic compounds; allotropy and alloying; cooling curves; types of equilibrium diagram and the lever rule.
Examined in the 70-mark end-semester paper
- Classification of engineering materials
- Solid solutions and Hume-Rothery rules
- Gibbs' phase rule and the lever rule
- Cooling curves and phase diagrams
- Isomorphous, eutectic and peritectic systems
Unit 2: Ferrous Metals and Alloys
10 hoursThe Fe-Fe3C diagram, eutectic, eutectoid and peritectic reactions and critical temperatures; plain carbon steels; effect of alloying elements; cast irons; HSLA, spring, silicon, Hadfield, HCHC, water-, oil- and air-hardening, hot-work, free-cutting, high-speed and stainless steels.
Examined in the 70-mark end-semester paper
- Iron–carbon equilibrium diagram
- Plain carbon steels
- Alloy steels and alloying elements
- Stainless steels and tool steels
- Cast irons
Unit 3: Non-Ferrous Alloys, Composites and Nanomaterials
4 hoursThe Cu-Zn diagram, brasses and bronzes; Al-Si and Al-Cu alloys and precipitation hardening; Babbitts and Pb-Sn alloys; classification, properties and uses of composites and nanomaterials.
Examined in the 70-mark end-semester paper
- Copper and its alloys
- Aluminium alloys and age hardening
- Nickel, titanium and bearing alloys
- Composite materials: matrices, reinforcements and fabrication
- Nanomaterials and nanotechnology
Unit 4: Heat Treatment of Steel
10 hoursObjectives of heat treatment; TTT and CCT diagrams for eutectoid steel; annealing, normalising, hardening and tempering; carburising, nitriding, carbonitriding, induction and flame hardening.
Examined in the 70-mark end-semester paper
- TTT and CCT diagrams
- Annealing and normalising
- Hardening, tempering and hardenability
- Surface hardening
Unit 5: Destructive and Non-Destructive Testing
6 hoursTensile, hardness, impact, creep and fatigue tests; dye-penetrant, magnetic-particle, ultrasonic, radiographic and eddy-current testing and advanced NDT.
Examined in the 70-mark end-semester paper
- Destructive testing of materials
- Creep and creep testing
- Fatigue and S–N curves
- Non-destructive testing
Unit 6: Introduction to Powder Metallurgy
4 hoursPowder production methods; the steps of making a P/M component; advantages, limits and applications such as self-lubricated bearings, cemented carbide tools and friction materials.
Examined in the 70-mark end-semester paper
- Production of metal powders
- Powder metallurgy: compaction and sintering
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).