PAHSU TY Mechanical syllabus

PAHSU · Third Year B.Tech. Mechanical Engineering · NEP 2020

Mechatronics Systems

MECHPEC-01D · Programme Elective I · Semester V · 4 credits · ISE 30 + ESE 70

One of the Programme Elective I options.

  1. Unit 1: Mechatronic Systems

    6 hours

    Key elements of mechatronics and mechatronic design; block diagrams, open- and closed-loop control, transfer functions and block-diagram reduction; examples such as engine management and domestic appliances.

    Examined in the 70-mark end-semester paper

    • Mechatronic systems and their elements
    • Open- and closed-loop systems and block diagrams
    • Examples of mechatronic systems
  2. Unit 2: Sensors and Actuators

    8 hours

    Linear, rotational, acceleration, force, torque, flow, temperature, distance, optical and ultrasonic sensors and their selection; hydraulic and pneumatic actuators, DC, AC, stepper and servo motors, solenoids, piezo actuators and VFDs.

    Examined in the 70-mark end-semester paper

    • Displacement, position and proximity sensors
    • Velocity, acceleration and force sensors
    • Pressure, temperature and level sensors
    • Optical encoders and sensor selection
    • DC motors and servomotors in mechatronics
    • Stepper motors
    • AC and linear motors
  3. Unit 3: Microcontrollers

    6 hours

    The 8085 microprocessor; the 8051 microcontroller; Arduino Uno (ATmega328P); interfacing sensors and actuators and programming fundamentals.

    Examined in the 70-mark end-semester paper

    • 8085 microprocessor architecture and instructions
    • 8051 microcontroller and interfacing
    • Arduino digital I/O, timing and delays
  4. Unit 4: Data Acquisition and Peripheral Interfacing

    7 hours

    Signal conditioning, sourcing and sinking, pull-ups, motor drivers, relays and opto-couplers; ADCs, DACs and op-amps; DAQs and loggers; serial and parallel communication, handshaking, RS-232/422/485, GPIB and USB.

    Examined in the 70-mark end-semester paper

    • Signal conditioning and op-amps
    • ADCs, DACs and interfacing
    • Opto-isolators, protection devices and relays
    • Displays, data loggers and data acquisition
    • Parallel and serial interfacing, handshaking and interrupts
  5. Unit 5: Programmable Logic Control

    8 hours

    PLC architecture and I/O processing, NPN/PNP sourcing and sinking; ladder diagrams, SFC and FBD; internal relays, jump and call, timers, counters, shift registers and data handling; temperature control and sequencing programs; PLC versus PC-based control.

    Examined in the 70-mark end-semester paper

    • Programmable logic controllers
    • Ladder logic and function block programming
    • PLC timers, counters and internal relays
    • PLC master control, jump control, shift registers and data handling
    • PLC control applications: pistons, motors, tanks and conveyors
  6. Unit 6: Mechatronics in Industry

    5 hours

    DCS, HMI and SCADA; modern HVAC; CNC machines and factory automation; IoT, Industry 4.0 and machine learning; ABS, traction control and driver assistance in a modern car.

    Examined in the 70-mark end-semester paper

    • Mechatronics in automated manufacturing and robotics
    • Industry 4.0 and digital twins
    • Anti-lock braking systems

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).