Mechanical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Mechanical Engineering (University)

Automation and Robotics

Automation principles, robot anatomy, drives, grippers and sensors, kinematics and DH parameters, programming.

Interview questions
Notes for Automation and Robotics are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Automation and Robotics

  1. Automation principles and strategies· notes coming
  2. Types of automation· notes coming
  3. Automated assembly systems· notes coming
  4. Robot anatomy and configurations· notes coming
  5. Robot specifications and work envelope· notes coming
  6. Robot safety· notes coming
  7. Robot drive systems· notes coming
  8. Servo and stepper motors· notes coming
  9. Gearboxes for robots· notes coming
  10. Grippers and end effectors· notes coming
  11. Robot sensors· notes coming
  12. Machine vision· notes coming
  13. Homogeneous transformations· notes coming
  14. Forward kinematics and DH parameters· notes coming
  15. Inverse kinematics· notes coming
  16. Manipulator Jacobian· notes coming
  17. Robot programming· notes coming
  18. Robot cell design and applications· notes coming
  19. Robot economics· notes coming
  20. AI and path planning for robots· notes coming
  21. Sensors, transducers and actuators in mechanical systems· notes coming
  22. CAD/CAM/CIM in mechanical systems· notes coming
  23. PLC architecture and programming basics· notes coming
  24. CNC systems· notes coming
  25. AI and machine learning in mechanical systems· notes coming
  26. Modelling and simulation of mechanical systems· notes coming
  27. Vibration and condition monitoring· notes coming
  28. Industry 4.0 and digital twins· notes coming
  29. CNC interpolators and machine configurations· notes coming
  30. APT part programming· notes coming
  31. Parametric (macro) programming for CNC· notes coming
  32. Robot arm dynamics: an introduction· notes coming
  33. Robots in material transfer, palletising and machine loading· notes coming
  34. Autonomous systems: levels of autonomy and architecture· notes coming
  35. Safety, redundancy and fault tolerance in autonomous systems· notes coming
  36. Sensor fusion, LiDAR and RADAR· notes coming
  37. Localisation: GPS, INS and SLAM· notes coming
  38. ROS and system integration· notes coming
  39. V2X communication and edge computing in autonomy· notes coming
  40. Automated flow lines and transfer lines· notes coming