PAHSU TY Mechanical syllabus

PAHSU · Third Year B.Tech. Mechanical Engineering · NEP 2020

Instrumentation and Control Engineering

MECHPCC-12 · Semester VI · 3 credits · ISE 30 + ESE 70

  1. Unit 1: Fundamentals of Instrumentation

    6 hours

    Measurement, monitoring and control; measurement methods, standards and calibration; classification of instruments; the generalised measurement system; sensors and transducers; static and dynamic characteristics.

    Examined in the 70-mark end-semester paper

    • Elements of measuring instruments
    • Static and dynamic characteristics
    • Calibration
  2. Unit 2: Measurement of Temperature

    4 hours

    Temperature scales and thermometers; thermocouples, their materials, laws and combinations; RTDs and thermistors.

    Examined in the 70-mark end-semester paper

    • Thermocouples and RTDs
    • Thermistors and thermography
  3. Unit 3: Measurement of Pressure, Flow and Motion

    5 hours

    Bourdon, dead-weight and diaphragm gauges; McLeod and Pirani vacuum gauges; rate and quantity flow meters, turbine meter, rotameter and hot-wire anemometer; LVDT; mechanical, inductive and photoelectric tachometers and the stroboscope.

    Examined in the 70-mark end-semester paper

    • Pressure gauges
    • Vacuum measurement
    • Flow meters
    • Displacement, position and proximity sensors
    • Speed and load measurement: tachometers and load cells
  4. Unit 4: Fundamentals of Automatic Control

    5 hours

    Manual and automatic, open- and closed-loop control; P, PI and PID modes; transfer functions and block-diagram algebra for the closed-loop transfer function.

    Examined in the 70-mark end-semester paper

    • Open- and closed-loop control systems
    • On-off, proportional, integral and derivative control
    • PI, PD and PID controllers
    • Transfer functions
    • Block diagram reduction
  5. Unit 5: Root Locus Method

    5 hours

    Angle and magnitude conditions, the pole-zero plot, real-axis segments, asymptotes and centroid, breakaway points, imaginary-axis crossing, angles of departure and arrival; sketching the root locus and judging stability.

    Examined in the 70-mark end-semester paper

    • Root locus
  6. Unit 6: Bode Plots

    5 hours

    Magnitude and phase plots of standard factors; sketching Bode plots on semilog paper; frequency-response specifications, gain and phase margins and stability.

    Examined in the 70-mark end-semester paper

    • Bode plots, gain and phase margins

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).