PAHSU SY Mechanical syllabus

PAHSU · Second Year B.Tech. Mechanical Engineering · NEP 2020

Machine Drawing

MECHPCC-05 · Semester IV · 3 credits · ISE 30 + ESE 70

  1. Unit 1: Basics of Machine Drawing

    3 hours

    Types of drawing; placing of dimensions, functional and non-functional dimensions; dimensioning arcs, diameters, holes, angles, chamfers, tapers, undercuts, repeated features, countersinks, squares, spheres, across-flats and threads.

    Examined in the 70-mark end-semester paper

    • Principles of dimensioning in machine drawing
  2. Unit 2: B.I.S. Conventions

    5 hours

    Sheet sizes and layout; conventional representation of materials, gears, gear assemblies, springs, threads, square heads, splined shafts and knurling; sectioning conventions and types of section; linear and angular dimensioning; weld symbols.

    Examined in the 70-mark end-semester paper

    • Conventional representation of materials and machine elements
    • Hatching conventions for sections
    • Full and half sectional views
  3. Unit 3: Free-Hand Sketching of Machine Components

    7 hours

    Proportionate free-hand sketches of threads, nuts and bolts, locking devices, foundation bolts, studs and washers; rivets and riveted joints; keys, cotter and knuckle joints; muff, flanged and universal couplings; bearings and pedestals; pulleys; pipe joints and fittings.

    Examined in the 70-mark end-semester paper

    • Drawing screwed fasteners
    • Drawing riveted and welded joints
    • Drawing keys, cotters and pin joints
    • Drawing shaft couplings
    • Drawing bearings and pipe joints
  4. Unit 4: Production Drawing: Limits, Fits and Tolerances

    7 hours

    Limit systems, tolerances and IT grades, types and designation of fits, hole and shaft basis, selecting fits and tolerances; geometrical tolerances for single and related features and their indication; surface texture, roughness numbers and symbols.

    Examined in the 70-mark end-semester paper

    • Limits, fits and tolerances on drawings
    • Geometric dimensioning and tolerancing
    • Surface roughness symbols
    • Production drawings and blueprint reading
  5. Unit 5: Details and Assembly Drawing

    5 hours

    Detail drawings from an assembly and assembly drawings from details (tool post, tail stock, crosshead, screw jack, drill jig, connecting rod and piston, gland and stuffing box and similar), with fits, tolerances and surface-finish symbols.

    Examined in the 70-mark end-semester paper

    • Assembly drawings from details
    • Detail drawings from assemblies
  6. Unit 6: Isometric Projection

    3 hours

    Isometric scale, isometric projection and isometric drawing, circles in isometric views, isometric views of simple objects from orthographic views.

    Examined in the 70-mark end-semester paper

    • Isometric projection and isometric drawing

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).