Mechanical Engineering (University) is coming soon
We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.
Mechanical Engineering (University)
Machine Drawing and Computer Aided Drafting
Sectional views, study of machine elements, interpenetration of surfaces, drawing of assembly and details, computer aided drafting.
Notes for Machine Drawing and Computer Aided Drafting are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.
Coming next in Machine Drawing and Computer Aided Drafting
- Full and half sectional views· notes coming
- Offset, revolved, removed and auxiliary sections· notes coming
- Hatching conventions for sections· notes coming
- Drawing screwed fasteners· notes coming
- Drawing keys, cotters and pin joints· notes coming
- Drawing shaft couplings· notes coming
- Drawing riveted and welded joints· notes coming
- Drawing bearings and pipe joints· notes coming
- Intersection of two cylinders· notes coming
- Intersection of cones, prisms and cylinders· notes coming
- Assembly drawings from details· notes coming
- Detail drawings from assemblies· notes coming
- Production drawings and blueprint reading· notes coming
- Limits, fits and tolerances on drawings· notes coming
- Surface roughness symbols· notes coming
- Introduction to computer-aided drafting· notes coming
- AutoCAD drawing and editing commands· notes coming
- Dimensioning and viewing in AutoCAD· notes coming
- 3D views in AutoCAD· notes coming
- Development of lateral surfaces· notes coming
- Auxiliary planes and auxiliary views· notes coming
- Engineering curves: conics, involutes, cycloids and the helix· notes coming
- Conventional representation of materials and machine elements· notes coming
- Principles of dimensioning in machine drawing· notes coming
- Isometric projection and isometric drawing· notes coming