PAHSU · Second Year B.Tech. Mechanical Engineering · NEP 2020
Kinematics and Theory of Machines
MECHPCC-04 · Semester IV · 3 credits · ISE 30 + ESE 70
Unit 1: Simple Mechanisms
5 hoursLinks, pairs and their classification, kinematic chains, degrees of freedom and constrained motion; Kutzbach's and Grubler's criteria; structure, mechanism and machine; Grashof's law; inversions of the four-bar, single slider-crank and double slider-crank chains.
Examined in the 70-mark end-semester paper
- Links, pairs and kinematic chains
- Degrees of freedom and Grübler's criterion
- Inversions of the four-bar chain
- Inversions of slider-crank and double slider-crank chains
Unit 2: Velocity and Acceleration in Mechanisms
5 hoursGraphical velocity and acceleration analysis: the instantaneous centre method (velocity only), relative velocity and relative acceleration, and Klein's construction.
Examined in the 70-mark end-semester paper
- Instantaneous centres and Kennedy's theorem
- Velocity analysis by relative velocity
- Graphical acceleration analysis
- Klein's construction
Unit 3: Cams
5 hoursCams in industrial automation; types of cams and followers, nomenclature; displacement, velocity and acceleration diagrams for uniform velocity, SHM, uniform acceleration and retardation, and cycloidal motion; cam profiles for radial cams with reciprocating followers and for an oscillating roller follower.
Examined in the 70-mark end-semester paper
- Types of cams and followers
- Follower motions: SHM, uniform acceleration and cycloidal
- Displacement, velocity and acceleration diagrams of followers
- Drawing cam profiles
Unit 4: Gears and Gear Trains
5 hoursGear geometry, involute and cycloidal profiles, theory of spur gears, interference and its prevention, contact ratio and path of contact (no numericals on gears); simple, compound, epicyclic and reverted gear trains, and the tabular method for epicyclic trains.
Examined in the 70-mark end-semester paper
- Gear terminology and the law of gearing
- Path and arc of contact and contact ratio
- Interference and minimum number of teeth
- Simple and compound gear trains
- Epicyclic gear trains and holding torque
Unit 5: Governors
5 hoursNeed for and types of governors (Watt, Porter and Hartnell); spindle speed of the Porter governor and spring stiffness of the Hartnell governor; sensitivity, stability, isochronism and hunting; governor effort, power and controlling-force diagrams.
Examined in the 70-mark end-semester paper
- Porter and Hartnell governors
- Governor characteristics: sensitiveness, hunting and isochronism
Unit 6: Balancing
5 hoursNeed for balancing; graphical balancing of rotating masses in the same plane and in different planes; balancing of reciprocating masses.
Examined in the 70-mark end-semester paper
- Balancing of rotating masses
- Balancing rotating masses in several planes
- Balancing of reciprocating masses
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).