KBCNMU · Third Year B.E. Mechanical Engineering · NEP 2020
Mechatronics, Robotic and Control Systems
ME-601 · Semester VI · 3 credits · ISE 40 + ESE 60
Unit 1: Fundamentals of Mechatronics
9 hoursMechatronic systems and system integration, mechanical–electrical–control–computing interfaces, sensors, signal conditioning, data acquisition and smart sensors.
Examined in the 60-mark end-semester paper
- Mechatronic systems and their elements
- Displacement, position and proximity sensors
- Signal conditioning and op-amps
- Displays, data loggers and data acquisition
Unit 2: Actuators and Embedded Systems
9 hoursPneumatic and hydraulic actuators, DC, stepper and servo motors, solenoids and piezo actuators, motor drivers, relay logic, and microcontrollers with sensor and actuator interfacing.
Examined in the 60-mark end-semester paper
- DC motors and servomotors in mechatronics
- Stepper motors
- Motor drives: DC, variable-frequency and stepper drivers
- Opto-isolators, protection devices and relays
- 8051 microcontroller and interfacing
Unit 3: Control Systems and Modelling
9 hoursModels of mechanical systems, transfer functions and block diagram reduction, feedback control, time response and stability, PID control and closed-loop speed and position control of CNC axes.
Examined in the 60-mark end-semester paper
- Modelling mechanical systems
- Open- and closed-loop systems and block diagrams
- Block diagram reduction
- Second-order system response and time-domain specifications
- On-off and PID controllers
Unit 4: Robotics and Automation
9 hoursIndustrial robots, their components, joints and degrees of freedom, forward kinematics, end effectors, pick-and-place robots and programming, automation sequences, and AGVs and AMRs in manufacturing.
Examined in the 60-mark end-semester paper
- Robot anatomy and configurations
- Forward kinematics and DH parameters
- Grippers and end effectors
- Robot programming
- Automated material handling: conveyors, AGVs and AS/RS
Unit 5: PLC, IoT and Smart Manufacturing
9 hoursPLC architecture, ladder logic, timers and counters, conveyor and sorting automation, SCADA, IoT machine monitoring and predictive maintenance, AI in robotics, Industry 4.0 and digital twins.
Examined in the 60-mark end-semester paper
- Programmable logic controllers
- Ladder logic and function block programming
- PLC timers, counters and internal relays
- SCADA and RFID
- IoT for predictive maintenance
- Industry 4.0 and digital twins
Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).