KBCNMU TY Mechanical syllabus

KBCNMU · Third Year B.E. Mechanical Engineering · NEP 2020

Kinematics & Dynamics of Machines

ME-506 B · Program Elective I · Semester V · 3 credits · ISE 40 + ESE 60

One of the Program Elective I options.

  1. Unit 1: Mechanisms and Machines

    9 hours

    Links, pairs, chains and degrees of freedom, four-bar and slider-crank mechanisms and their inversions, mechanical advantage and transmission angle, the pantograph, toggle, Geneva and steering mechanisms, and Hooke's joint.

    Examined in the 60-mark end-semester paper

    • Links, pairs and kinematic chains
    • Degrees of freedom and Grübler's criterion
    • Inversions of the four-bar chain
    • Inversions of slider-crank and double slider-crank chains
    • Mechanical advantage and transmission angle
    • Straight-line, Geneva and steering mechanisms
    • Hooke's joint
  2. Unit 2: Velocity and Acceleration Analysis

    9 hours

    Instantaneous centres and Kennedy's theorem, centrodes, relative velocity and acceleration of four-bar and slider-crank mechanisms, rubbing velocity and the Coriolis component.

    Examined in the 60-mark end-semester paper

    • Instantaneous centres and Kennedy's theorem
    • Velocity analysis by relative velocity
    • Acceleration analysis and the Coriolis component
  3. Unit 3: Dynamic Force Analysis

    9 hours

    D'Alembert's principle and inertia forces, dynamic analysis of four-bar and slider-crank mechanisms and engine force analysis, pendulums, dynamically equivalent systems and the inertia of the connecting rod.

    Examined in the 60-mark end-semester paper

    • Dynamic force analysis of four-bar and slider-crank mechanisms
    • Dynamically equivalent systems and inertia of the connecting rod
  4. Unit 4: Cams and Balancing

    9 hours

    Types of cams and followers, follower motions and cam profiles, circular and tangent cams, pressure angle and undercutting; static and dynamic balancing of rotating and reciprocating masses.

    Examined in the 60-mark end-semester paper

    • Types of cams and followers
    • Follower motions: SHM, uniform acceleration and cycloidal
    • Drawing cam profiles
    • Circular-arc and tangent cams
    • Pressure angle, undercutting and jump
    • Balancing of rotating masses
    • Balancing of reciprocating masses
  5. Unit 5: Governors and Gyroscope

    9 hours

    Watt, Proell, Hartnell and inertia governors, controlling force, sensitiveness, hunting, isochronism, stability, effort and power; the gyroscopic effect on aeroplanes, ships, cars and two-wheelers.

    Examined in the 60-mark end-semester paper

    • Porter and Hartnell governors
    • Governor characteristics: sensitiveness, hunting and isochronism
    • Gyroscopic couple
    • Gyroscopic effect on aeroplanes and ships
    • Gyroscopic effect on vehicles

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).